6 drawer dresser
![](/sites/default/files/20201215_100201.jpg)
Made this dresser for my newest Grand daughter. Turned out pretty nice. A few mistakes for sure!!! But I am proud and its functional. Worked on it off and on for a month.
![](/sites/default/files/20201215_100148.jpg)
Made this dresser for my newest Grand daughter. Turned out pretty nice. A few mistakes for sure!!! But I am proud and its functional. Worked on it off and on for a month.
Recently found the plans and this is what I came up with
The plans are so easy to follow! They are a great jumping off point for customizing the coop for your own needs! We added a run door, ladder support, insulated floor and wall, removable window, and a loft door. The girls LOVE it!
Thank you for all the diagrams on this website, this project could not have been completed without these. The entire project took a month worth of weekends. I used 2 sheets of 3/4" Birch plywood, 2x12x10 Southern Yellow Pine (rip to 4" strips), and 1x8x10 Ponderosa Pine for the roof and slats. Our 3 year old loves the bed and could not wait to use it. All month he has been asking about his new room, normally he does not like change but he loved this bed.
I've made numerous modern Adirondack Chairs using Ana White's design. The most often asked question is "does it come in different sizes." So I scaled the chair by 80%. The "mini" is perfect for children up to the age of 10 or as lawn decoration. Email me at [email protected] for a copy of the "mini" step-by-step plans.
This was made from reclaimed wood from various building around the DC area.
Sun, 02/17/2013 - 07:28
Nice! Love the table and the pipe bracing is very cool.
American Girl Farmhouse Doll Bed.
Been wanting to make some Adirondack chairs for years; have about 10 different plans saved that one day I could get to. These 2x4 modern plans made getting them done quickly possible due to simplicity of the cut list and cheap cost of materials. The only real change I made was to use 2x6 for the arms; I cut a taper along outside edge and increased the length of the arms by about an inch and a half to overhang the front legs a bit. Since I just used basic framing lumber, I milled all of the boards first with table saw and planer to make square consistent edges. And, I chose to use pocket screws in as many joints as I could so I wouldn't have screw holes on any visible faces. Add in a lucky find at the big box store paint return; scored this blue exterior paint for $2.00 a quart, and my weekend project turned out pretty good. Now I've got two neighbors that want 'em.
This was my first time building a piece of furniture. I learned a lot and was able to hide most of the mistakes I did make. It came out good, and now I'm working on adding in some pull out drawers inside the cabinets for movie storage.
This was my first project (ever). There were a few times that I wanted to throw the whole thing on the floor and start over but I persisted and it actually turned out very nice. Way better than I had anticipated. Thank you for the plans!
My little girl needed a step stool after building a modern height bathroom vanity. She was so excited to help with the painting. This was a very fast build. I spent more time painting than building. I used scrap 3/4" purebond plywood and had the paint on hand. I also used a spray lacquer to seal the paint. I used glue and my brad nailer, but will also add screws for extra support now that it is painted. I used a CD to trace the curves and the edge of a 2x4 to trace the handle. Thank you for another great plan!
This bench and table are based on Anna's plans, which I modified slightly to make them more distinctive. Hope you like them. Thank you Anna for your generosity.
I. FINALLY. FINISHED. IT!!! It has quite a few mistakes, however, I know what I will do differently on the next project. This was my first project to make almost completly on my own (husband cut the plywood for me). I am hooked!
Wed, 02/06/2013 - 19:55
Thank you! I have learned so much building this...I am trying to decide what to build next.
Wed, 02/06/2013 - 21:21
I know what you mean! I have a whole list of projects I want to do. Trying to decide which to do next is the hardest part.
Moses Cradle, easy project. Used a rocker from an old rocking chair and traced it. Finish is Minwax Polyshade in Espresso. Sprayed using my $12 Harbor Freight sprayer.
Made as a baby shower gift. It was well received!
Converted this entryway closet to a Mudroom. Came out pretty good. Had to put a board stretcher on the top shelf after I cut it twice, to get it back to the original size. Still plan on making the rolling trundle drawers for underneath. Thanks Ana!
We needed a coffee table for our new house. I started this project but abandoned it. Fortunately, my wonderful husband took over and finished it beautifully and it's better than I ever imagined!
From the builder:
The frame was very easy to build, but the drawer requires more skill to make sure you build it truly square. make sure to NOTTT build the drawer to fit EXACTLY in the space of your frame. leave 1/16" gap on either side of drawer to allow it to roll on its casters freely and leave 1/8" gap from the top of the drawer to the frame for the same purpose. if you make these plans in the early stage your life will be much EASIER when the final assembly comes together!! also take into consideration when making the plans for the height of your table that you will most likely want to put furniture pads on the bottom to save your wood floors and this needs to be added into the total height of the table so you do not mess up the drawer height. for the knobs I found it easiest to buy 1-1/2" screws and counter sink them from the back of the drawer face to allow for the knows to fit snugly against the faux drawers. and as for the faux drawers i used the slightest amount of wood glue and used my 18 gauge brad nail gun with 5/8" nails to attach the faces to the drawer from the front and then come back with wood filler over the nail indentations to smooth it out before painting.
Fri, 02/08/2013 - 12:02
I put this into my favorites folder. I'm impressed with how straight you got the drawer facings. Do you have any tips on how you lined them up so perfectly? Thanks for posting!
This was really a simple and fun project! My wife saw this on Ana White and knew immediately that this was a “must do now” endeavor. The industrial look of the pipes really fit the decorating motif of our guest bath.
We used reclaimed barn wood purchased at a local hardwood store. The wood was, presumably, some type of cedar and was very user friendly; no cracking from screws and cut / glued very well. We did have to run the stock through the joiner first, however, as the edges were weathered, warped & gouged. We didn’t sand or finish the wood in any manner and it looks exactly as it did when it was part of a standing barn.
We used 3 – ¾” 30 inch pipes for the towel racks and 1- ¾” six foot pipe for the top rail. The pipes were assembled & painted with Rust-Oleum Universal Metallic Paint & Primer in One – Flat Burnished Amber. Instead of eye hooks to hold the ladder to the top rail, we decided on pre-painted bronze robe hooks.
After stock was squared, pieces were cut for the border and ladder. The ladder is 32” wide (x) 48” long with 4” boards. We chose that length so as to accommodate 2 towel racks with enough space for 4 sets of towels. The assembly was made very simple by first attaching the 30 inch ¾ ” pipes as they really brought the construct into square.
The only significant challenge to this project was selecting & cutting stock so all of the exposed edges were weathered facades.
The project was finished off w/ a small shelf 23 “ wide (x) 30” long w/ shelf depth of 7” hung behind the toilet and a toilet paper holder base.
The bard wood was expensive (approximately) $200 for the project) and we spent about 20 hours building it. It was well worth the effort. And, to our amazement, all components finished level to the ceiling and square to each other … better “lucky” than “good”.
This was a simple and rewarding Fall project and is recognized by our guests as both a unique and utilitarian augment to our guest bath.
This was my first furniture build. Some things I would change next time, but overall very happy with the results.
This was my first real project. I had a great time building it for my twin brother. I was very fond of the table by the time it was finished and it will be difficult to let it go :) I followed the plans almost exactly, however I added just a bit of trim to the sides and added small feet made from leftover 2x2's. I'm already looking forward to my next project.
Sun, 02/10/2013 - 09:21
I am bookmarking this! Adding the little feet changes the whole look. I really like it!
Sun, 02/10/2013 - 18:58
That is gorgeous! I would have a very hard time letting it go as well! The feet are a great addition!
My boys were in desperate need of beds and I am always on a tight budget. I have always loved the farmhouse bed design and decided it was time for DIY project. The instructions made everything so simple. And Home Depot and Lowes are always so helpful in making the cuts....I can do it myselft, but I have to say it is nice to unload the wood and start building right away.
A few things I learned....
1. Not all 1x6's will be 5.5" wide, so just like the instructions tell you....double check
2. You can't stain wood filler...I had no idea it wouldn't take the stain very well
3. Using 2 2x4 to make a 4x4 post is WAY cheaper
Tue, 12/16/2014 - 08:49
These came out great! The room is decorated so nice and I love that wall paper. Some fillers are better than others. One filler I used that takes stain better is Elmer"s ProBond. It has a black label, says it's stainable and is pricier but I do like it. Again, great job!
Comments
newbiebramma
Mon, 12/21/2020 - 11:23
Thank you for all the plans…
Thank you for all the plans. I started wood working a year ago and I am still learning.