Community Brag Posts

Took be about 2.5 weeks to build this bed, working evenings and a couple full days on the weekend. I HIGHLY recommend getting a Kreg Jig. It made life so much easier.

To go from a queen to a king, simply add 16" to all of the width pieces. All of the length pieces will be the same for a queen and king.

I added one 2x2 support beam down the middle of the bed, with two 16 3/4 inch legs attached to it, for added support.  I screwed the slats into all 3 of the 2x2 support beams.

The drawers are the trickiest part. Make sure you follow the plan in order, waiting to install the drawers until after you have screwed the storage bins to the headboard and footboard.

2X4 Simple Potting Bench.

This goes into the mud room next to the recycling unit that I just completed the other day. My first project out there was a wooden bench with re-claimed wood. Very simple. I finished all three pieces similar. I painted grey paint on parts of the pieces (two coats) and then used a clear polyurethane (two coats with sanding before and in-between) on the rest of the projects.

This project was easier then I expected, and I love the look. I almost bought one like this at Ikea last year. So glad I held off as this was way cheaper to build and now has more sentimental value instead!

I was able to find brown bins to fit at target.com for $6.50 a piece, and can't wait for them to ship here. 4 of the 6 will be used for shoe bins, and the other 2 will be used for hats and mittens (live in Minnesota). So much neater looking than the plastic shoe shelves we had before.

FYI: there is a cut missing on the cut list: It is the bottom piece. The cut is 28 3/4" and is not mentioned on the list or in the diagrams....

Made a smaller version of the fire truck bed for our two boys. The youngest will move "downstairs" when he gets out of the crib. It was fun, but lots of work! It took me about 5 weeks of weekend/late evening work.

Thanks for the great plans and inspiration.

Connected Adirondack Chairs from Spring of 2015

Built this planter bench and added a removable shoe storage rack!!

A.S.

I loved every part of this project! I did it all by myself except for having the nice man at Home Depot cut all of the pieces for me (thank you tony! :) ). I had to buy all of the tools and found what I needed at a local flea market, and spent no more that $15 each tool. It was great. I have enough left over scrap lumber to build a coffee table of some sort next. Thank you so much for the plans, they were super easy to read and follow! I was able to find cushions at Home Depot as well, although they are not displayed in the picture since i love the stained wood so much. Since it is fall they were marked down to only $25/each which is a HUGE discount from previously being $90. The cost of the cushions will be the most expensive part of this project for sure, so make sure you can find what you want first before you get into this project if you have a strict budget for it!

I made this from the Ana White Build a $10 Cedar Tiered Flower Planter or Herb Garden plans. It was a quick and easy fun project to work on.

I built this closet system based on the plans here.  So easy and so basic, just putting them all together to make a very nice looking closet setup.  I used 12 sheets of birch plywood, and premium select 1x2 pine.  All stained in Minwax Jacobean and satin clear througout with semi-gloss clear on the drawer fronts.

For the rods, I used chainlink top bars, which cost $6 for a 10' piece, and used #0000 steel wool to buff them out and then polished them.  For the 45 degree corners, I used 1" electrical conduit, and placed two 45 degree bend in each piece, and again steel wool and polished them as well. 

For the drawers, I used soft-close slides.  When using these, I highly recommend installing the rear brackets as well, as they make installation so much easier.  16 pairs of soft-close drawer slides with brackets cost $120 for all of them on Amazon.

So proud of our first build! We used Ana’s potting bench design and leftover wood from our deck rebuild! Turned out great and has been so useful this spring!

I figured the first thing I should make was a bench to work on :)

I built this play kitchen for my daughter's second birthday during my newborn son's short naps or often with him strapped to me in his baby carrier. I spent more money on higher quality wood to save myself time and effort sanding the wood down. I splurged on a drinking faucet as it was the perfect size and a mini version of my real kitchen faucet. I used magnets on the fridge doors and oven door and a simple ribbon to prevent the oven door from opening too wide. I have built a few things befor-shelves, table, baby gate but consider myself a beginner who is still learning a lot about woodworking.

I built these beds for my son and daughter. They picked out their paint color and fabric for the curtains. I apologize for the picture being side ways. It uploaded up that way for some reason. 

I made this Ice Chest Cart for my son’s schools silent auction. It features a spigot for drainage, bottle opener, hook for a bar towel and I also set it on castors so it can be easily moved.

I just wanted to thank Lady Goats for the idea for this project. I got the plans from http://ana-white.com/2011/12/plans/rhyan-console-table and made some modifications. I wanted to use the table as an entry table, so I made it taller and longer to fit the space I had for it. I still have to poly it and will post more pics as it comes along.

As far as cost, I used 1x6 instead of 1x12 to reduce the cost for the project. I think at the most it came out to 90 (including stain, poly, screws, brushes).

And yes, I built it in the living room of my small apartment.

Thanks again!

Built this table for my daughter's nursery. She is going to be here next month so I'm trying to make sure her room is perfect for her.
This table was easy to build. I've been doing woodwork for about a year now so if I can do it you can do it, just make sure you have all the tools for the job :-)

These plans are easy to build. Built it in about a day. It was around $100 plus paint.