Community Brag Posts

First bird house..! 

Finished building my son's shop by enclosing an existing carport and adding these hand built carriage doors to the front of the shop. Sorry, not built from any plans here but used the techniques learned here from many of the other plans.

Gary

This is the rocket bookshelf plan with a color scheme for buzz lightyear

This is my first EVER project, but I have already made several more!! I love this site and the new found confidence I have to make things for my home! Keep the plans coming!!!

Quick and easy phone holders

Fireman Joe

My wife and I needed bar stools for the kitchen and could not find ones we liked. Also, finding ones that were the height we wanted was a challenge. So, after seeing the plans for the Simplest Stool we decided to make them. It was really quite simple with the plans given. Even the angle cuts were not that bad. Thanks for the plans for this awesome stool.

My patriotic pie safe

This bed is even more beautiful in person. I'm so pleased with it and the clear plans that Ana writes up. See my blog for a few more pictures.

I wanted something special for my Daughter’s room. I made her bed and bedside table and then I experimented with your book case plan. I was pleasantly surprised with the finished product.

I combined my favorite elements from three of Ana's dollhouse plans to make this dollhouse for my kids. My favorite part is the stairs, which I cut from a 2x4 with a miter saw. I made this project from start to finish in one day while the grandparents took the kids, and it was ready for Christmas morning! I made simple furniture for it, too, which you can see in the second picture.

I fell in love with the Farmhouse Toddler bed, but decided to stray a little from the plan and made a couple changes. I chose to use 2x2 lumber for the legs and purchased mortise-free bedlocks from Lee Valley Tools so I could disassemble the bed to make moving it easier.

I lengthened the height of the headboard so it was flush with the bottom of the bed and also lowered the entire bed so it's only 4-1/2" off the ground.

Rather than attach the wood mattress slats, I cut and nailed small wood "spacers" that the slats sit between. This keeps the slats from shifting, but makes them quick and easy to remove to disassemble the bed.

I loved the look of the curved rails on the Lydia Toddler bed but extended them a bit further than the original plan.

The mattress we have was a different size than the orignal plan was based off, so I ended up using all 1x4 lumber and then just trimmed off about half an inch on each side before attaching to the legs with pocket hold screws.

I'm thrilled with this little bed and so far our daughter seems to enjoy it as well.

Took 2 weekends to build 2 of them, they have a gently distressed finish.

With inspiration from Ana’s Little Crates, I prepared crates frames and slats separately so employees of a retiree may write on the slats. Once the writing was complete the slats were attached to the frames and presented as a personalized gift with examples of hanging or tabletop use.

Thanks

Followed the plan but I hand carved the decal.

This is our fireplace / tv bump out. Used your plans modified a little. Decided on a navy blue shiplap. The shelves are made from oak barn wood we got from a torn down dairy barn.

Bdunn2354

I loved the idea of the charging cubbies and the storage area in this plan!
I needed something a little shorter, for my three younger boys to be able to reach the hooks, though. I modified the plans a bit for this. I also opted out on the drawers and just left the cubbies open. With my boys, the more simple something is to use, the more likely they will make the effort ;)

I added a 2x4 to the back for hooks. I wanted the wall color to show through the back, so I didn't use a back piece.

My shelves are about 2.5 ft long. I wanted a display area in my dining room to show off some plates I had made for my boyfriend a while back.