Perfect End Tables
A collection of different sized perfect end tables for my mother.
A collection of different sized perfect end tables for my mother.
I love these shelves. So simple to build and still make a big impact. I built mine just a little different from the plan. I used 1x3 furring strips for the bottom and back pieces instead of 1x4's and then ripped a 1" strip from another 1x3 for each shelf to create the front trim piece instead of a 1x2. The shorter front trim piece gives me just enough ledge to keep the frames from slipping off the ledge, but provides maxium display area for the art work.
For three shelves just like these you need:
They were assembled using 2" fiinishing nails and lots of wood glue.
Was really excited to build this when I moved in to my new home. It's such a functional piece! I used different types of wood to cover it instead of staining it different shades. That was a fun puzzle to figure out. Really love it and thanks for the free plans!
Used Ana’s plan and adapted for slow-close sliding drawers.
I love pallet shelves! Here I have three different sizes with three different finishes. It is amazing what 10 minutes, a jig saw, and a piece of sandpaper can do!
I've been looking for a simple design for a consol table that I could easily modify to fit in my kids' club house. This one fit the bill perfectly! I also happen to have a pile of 2x4s left over from a closet demo, so I wanted to use those up. I basically built 2 of the consol tables, letting the 2 outer-most horizontal beams extend across and 25.5 inch space and connect the two consols. Then I put in a middle beam and that created the perfect space to set some catering pans in it. Also, I only had 2x4s so I used those for all the pieces, making the gaps a little wider than the original design. And lastly, because I didn't quite have enough wood, I shortened the vertical beams. If you look at the picture, all of this will make more sense! Thanks for the inspiration and direction! ps - I have no idea how to rotate the photos. Sorry!
This bed frame is for my daughter’s new house, in the guest bedroom. She chose the design and got all the supplies to make it. The wood is knotty alder. It came out looking fairly close to the inspiration picture my daughter gave me to follow.
I used the Cassidy bed plan and made adjustments to accommodate the iron piece. The feet and top caps are made of one routered square with another slightly larger, unrroutered square stacked on top of it.
Thanks for the easy-to-understand plans. Everything I’ve learned about building has come from this awesome website!
I bought a condo but I didn’t have a lot of space to entertain and grow things so these storage benches were the perfect solution thanks Anna for making such great easy to use plans out there for people of all skill levels
Wed, 10/06/2021 - 10:25
Great solution to add storage and seating outside, thanks for sharing!
This is a great beginners project. I wanted something that would match my living room and still be functional for my daughter to get her toys out . We have a full tutorial at our blog.... www.Ahouse-2-Home.com Also , if you have any questions please feel free to leave us a comment! Thanks!
Love this trunk! It was my first attempt at moulding and I probably should have practiced on scrap wood first (recommend)! But it turned out great and one of my favorite pieces (because it's filled with toys).
This is my first fine woodworking project after taking two classes at my local Firestarter FabLab community entrepreneurial center.
I used wormy maple, the top is 40" x 1 1/2" that I used the CNC router to cut out. The base I used 1" and glued everything to thickness for the the Square X Base Pedestal Dining Table plans, with a few variation. For the 45's I only made 2x4's instead of the specified 4x4's and the same for the X on the bottom. Thrilled with how it turned out.
Thank you for the great inspiration!
My husband and I put this together to fit a spot that was just slightly off of what standard furniture would accomodate. Looking for something simple as a first build, we went with the Kids Country Bench and made some changes along the way.
We made 3 cubbies on the bottom shelf for extra storage and a little extra stability, since our boards were more bowed than we preferred. We also removed the front and back aprons. In the front we just attached a 1x2 that we ripped into a 1x1 as a trim piece. In the back, we centered a 1x2 to give a slight lip in the back.
I don't have a jigsaw, so we used my FIL's Scroll Saw. That was interesting ... but the sides turned out ok. Not perfect, but ok.
I was hoping to finish this with a high gloss product, but since the boards we ended up with more 'rustic' than I anticipated, I decided to embrace that and go with a distressed finish. I used a spray primer, and then one coat of Sherwin Williams yellow, covered with a dry brush of Sherwin Williams blue. I then sanded the corners and edges and finished with a spray top coat.
We had lots of fun, although it took us a long time. We were only working in small shifts, in between naps. If we had managed to get, say, 3 straight hours to build, I think we could have finished in in that time period.
This was a great starter project, and it's nice to know that we can make MINOR modifications to a plan and not have it fall apart on us :)
Thanks for the inspiration Ana!
My husband and I were discussing how fun it will be to take our little boy bowling once he is old enough to enjoy it. From that conversation I got the idea of building a miniature bowling lane. I was also inspired by Ana White’s #GetBuilding2015 challenge to make use of the large pile of lumber stored in my garage.
Tue, 04/28/2015 - 10:53
What a cute project! I'm sure there will be many fun times ahead. Thanks for sharing!
After seeing how expensive custom cushions can be, I decided to build a custom outdoor sofa around the dimensions of the cushions instead of the other way around. I took some plans for a chair and modified the dimensions. I also gave the seat a 7 degree downward slope and gave the backrest a similar angle to in order to keep the cushions from falling over since each section is a single piece (seat & backrest).
I used a jigsaw to round out the corners of the armrest and then sanded them smooth. I ended up painting it white (hard to see in the 2nd picture) and it came out great.
My favorite project ever because I built it for my 18 month old grandson. He really loved playing in it. Thanks for the plan Ana. It was well done and easy to follow.
I built this doll house bookcase for my little girl for her Birthday. And she loves it!
I used white pine. I did not want to use paint. I did 5 coats of clear stain. I like the look of the natural wood and the knots to show.
Bar height table witb 4 chairs and 2 benches. My mom wanted a new table big eight to sit 6 to 8 people, I think it can fit 10 though!
After getting ridiculous quotes for new cabinets, we searched out ways to save money. Ana White, your site has been a blessing! I have a construction background and was planning on doing everything except cabinets and electrical. I estimate that your plans and inspiration have saved us at least $7500.00!!! Thanks so much. We will continue to update as progress continues!
Mon, 05/04/2015 - 07:03
I can't wait to see the final product. Keep the pix coming. Will you be buying raised panel doors or going for a more craftsman style look with a 1x2 frame around the cabinet door?
In reply to Cabinet Boxes Look Good! by Heatherdee
Sat, 05/16/2015 - 07:08
Thanks for the encouragement, Heather! We are actually using Ana's plans and building our own shaker doors. The plans are awesome and we have discovered that we LOVE building cabinets!!