Community Brag Posts

Coffee station with trash can holder and storage.

Another build for a co-worker. She wanted a bench for the front of her bed. I got the colors from her bedroom and matched it.

I built this "Sweet Shop" for my daughters for Christmas this year. I cut vinyl on my Silhouette machine for the signs and made a couple of extras in case they decide to use it for a library or post office later. It was a fairly simple project and I made it over a couple of days while my youngest was napping. I added some scrap 1x4's to the front to cover my imperfect paint job-ha!

I made my first dining table using pocket holes. About a week after I sold it, I ended up having to go to the lady's house and put one of the legs back on it. I quickly realized pocket holes were great for most things, but dining table legs might not be the best. Ever since then, I've been using dowels to reinforce pocket hole joints on table legs. So far it's been a great solution. Here is a video explaining how it works. Hope you like it. Patrick

This was a really fun little project. I used my Kreg jig to avoid filling/sanding exposed screws.

Pretty basic design - I made a few modifications to the published plans.
1) Slightly longer guard railings
2) Made the cleats flush with the bottom of the side rails so that the guard rails are elevated above the mattress.
3) Added "slat" design for the headboard.

Overall a pretty simple project, but like everything, takes time. Best of all, my little man loved it at first sight and is already using it!

Awesome plans!  Followed everything and it came out great.  Thank you soooo much, my son loves it!!!

Definitely one of my favorite rooms in the house. Not shiplap but reclaimed wood. Had to deal with lowering everything because of the trunk lines but overall we love it.

This was our second build. Seemed easy enough, but definitely a 'learning experience' here! Most importantly, we learned the value of a straight board and how furring strips are anything but. Thankfully, I got my main squeeze by my side through it all. Even if he is mirroring that same confused expression I get when things don't quite pan out the way they should. LOL!

Easy 3 tier planter.  Made from Ana White's plan  Made for free from scrap wood  that I pulled out of the trash and portions from a pallet, ripped 2x4 and shipping container.  #ForMereMortals #planter    

I built this potting bench using leftover pieces of pallets and play wood from other projects...
It is a three-level bench to maintain order with my pots where we start our seedbed crops and reproductions by cuttings.
Any comments to improve my design will be sincerely appreciated.
Regards
Claudio from Chile

We wanted two smaller tables and four benches so we can rearrange as needed to make one big or two small tables. We can also move them back and forth between patio and deck. We hoped to have this done in a weekend but it took us two weeks working at night after the kids went to bed. I love how they turned out but I'm not sure I will try another project this involved!

My wife and I found some grass clothe mirrors at a local home decor store that we loved, but they were either too big or small for our space. (Not to mention they ran $300-$450!!!) Using the same height/width ratio I built my own.

For this project we used:
-spare 1x4 and 1x6 pine boards left over from other projects (SORRY, I do not have the cut list)
-brad nail gun
-miter saw
-piece of 1/4" plywood (to hold the mirror in on the back)
-8 wood screws (to fix the plywood to the frame)
-an old bathroom mirror
-glass cutter (~$6-8 at Home Depot)
-gloves (for cutting and handling the glass)
-olive oil (for lubricating the glass cutter)
-grass clothe (had to buy it online by the roll ~$75, only used half)
-scissors
-spray adhesive (~$6-8 at Home Depot)
-picture hanger hooks (~$1 at Home Depot)

I spent more time thinking about how to construct the frame than actually making the cuts and building it, which took about an hour. I then spent about a month waiting for the grass clothe to arrive in the mail. Then it was about another hour cutting and affixing it to the frame with my wife.

This was my first BIG project that I have ever attempted.  Would I do it again?  Probably not, it definitely was a "bite off more than you can chew" situation.  Many adjustments had to be made to fit our needs, however it turned out wonderful and I am happy with the results.

I tweaked the plans for the folowing reasons:

• Twin XL mattresses - I wanted something thick and soft, as well as supportive.  I was able to find memory foam twin xl mattresses (thank you amazon) and they delivered right to my door.  This was the first factor in changing around all the measurements (to fit the mattresses).
• L shaped couch - The husband wanted an L shaped couch.  I wanted two identical couches, since it seemed a lot more simple to do this.  I lost that battle, perhaps I gave in to the notion that I could take on the added challenge.

The framing was easy as pie.  We opted to not do the storage concept- we have enough as it is.  We bought fabric online from a fabric wholesaler based out of Chicago (found them on Amazon).  This was probably the most costly out of everything, and with two cats and a dog I deeply regret going with blue-grey canvas.  It looks great, but shows stains very easily.

The padding was relatively simple to do.  I should have done more than just one layer, since it seems pretty hard on the corners and edges.  Again no big deal, I don't lay on the arm or backing.

For the pillow cases and mattress covers, we found a woman who sews in her spare time to make zipper cushions, so we could easily take the cushions on/off to clean them.  This was a little pricey, and I wish I could sew, but sadly I do not have the patience (or sewing machine for that matter).

Stapling the fabric and assembling the couch together... oh what a nightmare and test of patience that all was!  Again since I caved on the L shaped approach, I wanted an arm rest for the "chaise" portion of the couch.  Seemed pretty simple and straight forward, right?  NOPE!  I had to strategically assemble and staple the fabric, so the last part to staple down wasn't in a visible area.  And to top it all off, the framing was too large to just assemble in the garage and bring inside.  Assembled, this five thousand pound monster couldn't even fit through my doorway!  So assembling it all together, and uphostering was done in the living room.  I must say that this is the most solid (and heavy piece of furniture) that I have ever encountered.  If a tornado came ripping through my neighborhood I would probably try to find refuge and hold on to the couch- I can barely move it, it's so heavy.

It was so much fun doing this project.  The fabric portion was a challenge to say the least.  It was a fabric rubix cube, but we got through it with patience and planning.

Had to share the results from your plans for corn hole boards! I made them for our wedding. This was a great first project after watching my dad in his workshop when I was younger. These were so fun and easy, and our guests loved them!

Corn Hole Bags