Community Brag Posts

When designing the layout for my husband's home brewery/man cave I needed seating that would fit in the narrow space. I looked at several plans and used pieces from a few. The final support design was suggested by my brother-in-law. I am in the process of making cushions to fit as it is definitely not something to sit on for long with any comfort!

I wanted the dresser to look a little more like a piece of furniture since it was going to be in our walk-in closet, so my husband made cubicles to hold the baskets rather than rails.  He used .75" sandpaper-grade plywood, painted it to match our bedroom walls, and added matching baseboard to dress it up.  The towel bars on each side were added so that towels and washcloths could hang to dry prior to putting them into a basket.  An awesome side benefit is that the top of the dresser is a convenient place to rest the stacks of folded laundry as I'm hanging them up.

This is a basic console table, aside from the drawer. This was my first time attempting drawer, and it wasn't too bad. The top I put together from a piece of 1x8 and 1x4's using my Kreg jig. It ended up being a bit long, so I trimmed the breadboard ends down a couple inches. For the base I used reclaimed table legs and 1x6's for the aprons. To make the drawer opening, I simply cut out a rectangular hole slightly larger than my drawer box out of the front apron. The drawer box I built out of 1x3's and 1/4in plywood and then attached a piece of 1x4 for the face. Since it was a small drawer, I didn't want to purchase drawer slides for it. I pocket holed some 1x4 stretchers, going from the front to back of the table on either side of the drawer opening. I then screwed a strip of 1x1 to the drawer box horizontally, lined it up to the stretchers and screwed another 1x1 to the stretcher. So basically, I made my own sides using 1x1. I added a bin pull and was done. I feature a few other projects like this on my blog http://pneumaticaddict.blogspot.com .

What an awsome introduction to using a Kregg Drill. The plans were so easy to follow, making this a really fun build. I did increase the dimensions of the kennel to accomadate Ezzy's full grown size, but the plans were otherwize followed. The tin signs arranged for the top of the kennel makes it a great conversation piece.

This is a very easy project to make for the beginning woodworker. It is low cost since it is made from scrap pallets and should only take a couple of hours to make. The same plans can be used to make a nicer version from 1x4 cedar boards. The planter holds succulent plants which are almost care free and extremely easy to grow.

More Info: https://www.instructables.com/id/Succulent-Planter-From-Pallets/

I built this toy box for a friend who just had a baby. I followed the plans, except I used pocket holes for the main box. Instead of the base moulding I used 1 x 4's and carved out the shape with my jigsaw. I also used quarter rounds instead of cove moulding because I couldn't find that.

This is my first project and I am thrilled with how it turned out. Thank you Ana, you have empowered this stay at home mom! 

I am not a carpenter, I do not even have a tape measure. I got tasked by my leadership dothan class to build a farmhouse table for the academic dream room which is part of the Bright Key Program. Which is being renovated at Honeysuckle Middle School. Found your plans and got inspired. One glitch they wanted this table to be able to sit fourteen chairs. So I had to make a few adjustments like increasing the main boards to twelve foot. Because of your plans, many urban middle schoolers will have a place to get tutored considering cafeteria tables are so expensive. I am a believer of your plans. The positive feedback I received was well worth my time and would not of been a sucess without your plans. I did mine with pocket holes as well. 

We made eight of these benches for Christmas gifts this year. It was a lot of fun and we learned so much along the way. We made 5 benches in the standard 30" length, 2 in 36" and 1 42" bench on request.

Suggestion for building: Make jigs so that the legs and side boards are the same size. It doesn't exactly matter if the measurements are a little off from the plan, as long as they are consistent in each bench.
We chose to paint the bottoms off-white and stain the tops for an elegant rustic look. However, we fully stained a couple of the benches as well because we thought they would look best for a few of our family members.
It was hard to tell exactly how long each bench took because we worked on all eight at once when we had free time, but one bench shouldn't take more than an afternoon if you are new.

I also added a picture of the one bench we chose to distress.

A few months ago, I made a simple workbench to store my miter saw and other power tools when I'm not using them. I love it. It was a very easy project. I opted to do a full bottom shelf and added more 2x4s instead of the standard three.

I present the "Castle Loft Bed" with minor modifications. Finished in a "Frozen" theme.

It was time to upgrade my youngest to a "big kid bed" and she was insistent on a frozen bed. After searching for various options we settled on the "Castle Loft Bed" from the Ana White catalog of plans.

We left the slide off, due to available space. Also we changed the steps to be more of a usable toy box/storage and hamper area. I also modified the internal bookcase to have a small "secret" cubby for her "valuables". We also added color changing LEDs to fit the little princess's mood.

I hope you like my rendition and keeps in spirit the DIYers quality.

I shortened this table to fit the space, it works perfectly. Thank you again Ana for your wonderful plans.

Absolutely love this site. Built 2 of these for my living room. Now building the matching sofa table to match. Couldn't be easier and I think they turned out great. Thank you for all the great plans

I followed most of the instructions, but made adjustments on the sizing of the wood because I was using rebar.

We were looking for bookshelves for our children's bedrooms, but with 3 kids the cost was going to be astronomical. So I found a bookshelf I liked, googled the name and stumbled across Ana's plans. So glad I did!

A simple bench to try my first Kreg Pocket hole Jig. I designed the bench myself, but did not create plans. I used pine wood and 3 layers of varnish for protection. My wife wanted to natural finish so I preferred varnish over paint.

Surprinsingly easy project ! And my wife is very happy that the staircase if finally tidy. Happy wife, happy life ;-)