Community Brag Posts

This was perfect for my hall as it doubled up as a hall stand too. Love it.

It was a great project for my dad and I.

This was my first attempt at furniture. My husband helped a little but I did most of the work. Worked out beautiful, an excellent birthday pressie for my daughter. Started cutting wood  one afternoon, and finished painting and assembling the following afternoon (had a birthday cake to bake otherwise it would have been finished earlier). I used recycled timber for tops, the rest of the wood cost $50, so guessing Australian timber is way more expensive than USA. Bought Kreg jig specially for this project. Pocket joins give an excellent strong join. Had trouble getting crosses on bench correct, required many rescaling a to get right. Also had a wonky table because I screwed to the recycled timber top (some of that wood is warped) so fixed with a choc under two legs. Very pleased with result, look forward to my next project!

This was our first project from Ana-white. Make sure you notice that the dimensions on the cut list & drawings are different! We went by the cut list. We made a slight change to the frame on the end supports: instead of a 2x2, we used a 2x8. We felt more secure about people/kids pushing down on the edge of the table since we were able to both notch and put two screws into that end piece.

We used Aspen for the top, which I would not suggest. It ended up soaking up the stain very unevenly and blotching, even after using pre-stain.

For hardware, we used a 5 foot black iron pipe from Lowe's. Once we had the table assembled and the holes drilled, we remeasured and had Lowe's trim it by a few inches and re-thread (for free). We also used four square washers from McMaster-Carr (part no. 91128a140) which were $11after shipping.

We made our own wood putty out of sawdust, craft glue, and a little bit of the stain that we used for the table. It worked like a charm.

The two of us spent maybe 5 hours for assembly and another 6 for finishing.

This is our version of the farm house table. Flat white base with a grey finish on top to give it a coastal farmhouse theme. 

The first time I saw Ana's pallet shelves I knew I had to build them! It took a while but I found the perfect application. A place to hang the kids bibs and our snow pants that are a bit too long for the coat rack, and the bonus shelf for wet hats/mittens or chicken gloves that you don't exactly want in with your clean stuff ;>

My wife saw a painter's ladder shelf at IKEA and wanted one for our master bathroom.   I showed her the shelf on Ana's site and she liked that one much more.  So ... a few hours later we had our  new shelf and my wife couldn't  be more pleased.

This took me forever to do even with the plans and I still had to rig it cause I just couldn't get it square.  Im working on that but I'm very new at wood working and took this project on but I absolutely love it. This really cleared up my shed and space combined with extra tables to work on.  I got to use it for the first time today and it was awesome.  I think everyone should have one of these !!!

I needed a place to put extra plants in my classroom, and this was easy and fit the bill perfectly. I left out one shelf to allow space for plant growth. - Jennifer

I followed the plans for the Side Street Bunk Beds and added the ladder and guard rail from the Simple Bunk Bed plans. I modified the angle on the ladder so that it wasn't as steep of an angle as called for in the plans. I'm not sure the length for the ladder stated in the plans was correct anyhow as mine came up too short, leading me to modify my angles and not completely scrap my boards. I don't recall the angles I used at the moment. This was a "side" project that I completed this Fall in between the normal duties of mom and being in 3rd trimester of pregnancy! Not a hard build, but a heavy one! I used 1/4" lag bolts for the rails so we could easily disassemble it.

Sanding proved to be a big task. I thought I had skimped a little on this task, but once we applied our paints, it all smoothed out just fine. We distressed it, so it has a slightly rugged look, yet a shiny, satin finish. I didn't focus too much attention in painting the slats and inside rails (one coat of white plus one clear top coat). We sanded down the rails that are exposed to the bottom bunk, and slacked on the ones closest to the floor.

The beds are gorgeous! The picture doesn't do it justice. Well worth the effort and savings as opposed to buying a $1500 bed. Plus, my girls got to see mommy create something practical! When they are old enough, they can help!

Built this for my father for Father's Day he loved it.

I gave up my closet for a bathroom remodel last year...totally worth it. Since then my shoes have been stored in a pile next to my bed.  So happy I found this wonderful pattern.  I love my new shoe dresser!!  Thank you Ana!!