Community Brag Posts

Two hours and done!

I modified the Salsa console table plans a little for my version. Assembly is pretty much the same, just added more detail like making 5 piece doors and draw fronts, adding back brackets to allow for cedar paneling behind the doors and recessed the middle walls so the doors close on them instead of inside the opening. The center will remain open for now.

the whole table and parts are poplar, minus the drawer bottoms which are beech ply. Because its made out of poplar, it jacked the price quite a bit. However, i wouldn't consider using anything less then select pine to make this table which is only slightly less that poplar. The #2 pine is total crap and not suitable to build a piece of furniture out of. Anyway, I've got about $300-$350 in building supplies (wood, screws/plugs, finish), and about $80 in hardware (hidden euro hinges and bearing drawer slides).

Hope you like it, as i am quite proud of it!

One other thing, if you plan on building this table, double check the material & cut lists. I found discrepancies.

My husband and I built this for our son for Christmas. We had so much fun doing this and all the detail that went into it. Both the fridge and stove have battery operated motion sensor lights & the backsplash is diamond plating. Very cool!

Here is the outdoor sectionAL I built with redwood.

I’m no carpenter but this went well. I did it all with pressure treated because it is in the open. They filled in the area where there used be a hot tub. Surprisingly comfortable, too. Thanks Ana

I built this stool for my 2 yr old grandson. Added yardsticks to the top of the steps for a different look, and painted the stool, then sanded randomly, added stain and wiped off for an aged look.

Inspired by one of your older farmhouse tables, then my wife found a pottery barn type farmhouse, few tweaks later I ended with this. Then decided we needed a bench for the kids so built in a corner bench and then made the cushions. Lots of good meals to come. Email me at [email protected] if any questions.

Was very easy to put together even with pocket screws.

I really don't know where I got the inspiration for this shelf. We went to a primitive collections store a couple of weeks ago and I found this cool window off of a 1920's house. A couple of issues you run into with this is: 1. Windows from this time used leaded paint to paint there windows, so make sure when you sand you are in a well ventilated area. 2. Finding a window with no broken glass. Once you get all this the it's pretty easy to build. This is pretty much a backwards version of the media shelf with the door up top and the shelf on the bottom

My first project! Dragged home some pallets and out came this. Theoretically, you could really do this in less time than I did but I had to customize it to fit it in the space that I wanted. I also took a lot of time sanding, as I was deathly afraid of getting splinters!

Pine wood with 2 coats of Minwax Mahogony Gel-Stain and 2 coats Minwax Semi-Gloss Polyurethane.

Used you basic 2x4 bench / couch plan but added a sloped backrest and more 2x4s across for more support.

Jerry

We modified the plans because I had a specific idea of what I wanted and we needed a king size bed. We are so proud. We used left over foam from a previous project and covered it with the faux leather for the back rests. Because I love the look of dust ruffles but couldnt use it because of the slats to support the bed I cut out the material from which the dust ruffle is sewn and attached velcro to it and then to the bed and I got the look I wanted. Ana is awesome!

My daughter is OBSESSED with trains and I've been yearning to make a project from ana's page for YEARS. This was a perfect opportunity to start my first project and I'm pretty proud of myself with the results!

I scouted out wood for a few weeks and bought all my 1x6's and 1x3's at a discount wood place and the 1x2's were on sale at Home Depot for .80 cents a pop. All cuts were free cuts with the 'big machines' at the lumber shops.

I used pocket holes to attach the frame and the frame to the bottom plywood and plugged the holes.

I hand sanded all the wood before building and then at a finer grade after and finer still between finish coats.

Wood conditioned and stained in English Chestnut (2 coats) and 3 coats of high gloss clear finish over a period of 3 days. All Minwax.

Aside from a few wonky pocket hole screws going through the other side (my first time using a kreg is this project) and having to fix 'em, this was a pretty easy/fun project to do. My 2 year old helped plug holes and sand a little.

The flip-side of the shiny stained table top is a chalkboard which has been a HUGE hit because it is almost tripple the size kiddo has been drawing with and it's pretty nice. The chalkboard paint was the latex stuff found in home-depot...some can be coloured but i went with standard black.

Love this plan from that's my letter! I modified the base slightly by using 2x2s secured to 1/4" hardboard. I also increased the base dimensions to 11x11 so it could accommodate additional storage.

For a 4-H project this year, I want to make the Play Farmer’s Market Stand. I currently work at a daycare and I think the kids would love it.

I built a farm house dining room table last week and wanted to add more seating to it. I found this bench on here and decided to add my own touch to it. Was going to be a cheap project but 2 inch foam is a lot more then I thought.

I just finished setting up my bedroom, not a lot of cash for the furniture and look I wanted so I decided to tackle your farmhouse designs and do it myself. I found these scrolled wood panels at homegoods (homesense here in Canada). I used two panels, each had 5 sectioned scrolled squares so I cut one section off of each panel to use on each of the side tables. I still have to finish the bed's footboard and side rails with the last 4 sectioned panel piece that I have left.

I was surprised how these turned out. I got the old world look at a very good price...for a total cost under $300. I think I got a pretty nice deal.

I think I might try and do some more projects maybe the buffet next.