Community Brag Posts

I'm so excited Ana created plans for this table!  When I first came across it on Pottery Barn Kids it was love at first sight. :D  I built it over the weekend for my little toddler.  Unfortunately, he's too short for it, but he'll grow into soon enough. :)  (I secretly wished it was an art table appropriate for my height!)

It cost me about $75 to build.  I splurged and bought select pine boards for the project.  The art table was also my submission for September's Fab Furniture Flippin' Contest.  September's sponsor is General Finishes and the theme was geometry!

Now, I just need to build matching seats! I love the little stools Ana built; maybe I'll do something sorta like that. :)  

Thank you Ana for inspiring me to build!

Great plans!  We love the end results!

We loved the Art Rail idea but also the idea of doing an art cable. We already had alot of the cable supplies at home, so that idea won. The Ana's Art Rail and Pottery Barn's Art Cable was our inspiration idea for doing the cable.

Just a simple, but solid and stable patio table to replace the IKEA version that was warping and disintegrating. So much happier with this version. Also used bolts and wing nuts for attaching the legs for easy disassembly and storage for the winter. Should get many years out of this table.

#formeremortals   #anawhite  
A bench I built for my sister as a birthday present.  I used whitewood for the painted parts and some left over knotty alder for the top and cross supports.  The alder was from a kitchen rehab and I have been holding on to that wood for ages. :)  The hardest part was the cross supports - figuring out the angle was a bear!   Thanks for the plans Ana!

Thanks Ana for the great, easy plans!

Note: I used an exterior deck paint to paint this furniture. Although it has a rough texture, it doesn't bother us because of the cushions. Very easy to spray off, and has been through two seasons with no chipping or discoloration. Yay for less refinishing time and effort!

I'm working on a few projects I have half finished, but when I saw this one the other day on Ana's site I could not wait to do it and post my first brag. It's not perfect, my spacing is a little off because I didn't double check my 4" spacer board (it was only 3 3/4!), but I still like it and will put it up in my son's room. I tried to use the 1 x 2 and 1 x 3 furring strips like Ana used but the spacing didn't look right so I made it totally out of 1 x 3 strips. I used a nail gun and miter saw - was much faster then doing by hand.

My boyfriend and I built the farmhouse table and bench in one weekend. We are SO happy with the way it came out, thanks to Ana White for her plans!!

Wanted to build a nice sofa table to go underneed the large canvas behind my couch.  I wanted something more simple and robust to suit my taste, but also wanted to be able to give it a nice rustic look to to suit what my wife wanted.  The kentwood bookshelf fit the bill perfectly.

Thanks so much for the plans. Built it for my visiting nephew. Had a hard time with wood splitting, definitely predrill once you have the pocket holes lined up. I finished with food grade mineral oil, may go over it with beeswax.

Doll Bed...check
Toddler Bed....check
Twin Bed...check!

The only modifications I made to this bed was in how the side rails and slats were put together. I built this bed as a custom order so it needed to be portable and easy to disassemble. With another twin bed as my guide I constructed the side rails with a 2x8 with a 2x2 to support the slats. I used some long screws with the star pattern (yeah whats that called?) to attach the side rails from the outside of the headboard/footboard legs. For the slats, I drilled a hole about 2" from each end and inserted in small wooden dowel, then lined up my slats, making sure one was on the other side of each dowel. Then I used some strips on canvas fabric 2" wide and staple gunned it down each side to attach the slats. Then when you take it all apart you can just roll up your slats. Sorry should have taken more detailed photos of that....

I followed the plans for the Cubby Bookshelf, but added a 4th shelf to it. It is stained with a Rustoleum "Sunbleached" stain (I think it's called "Driftwood" now), with Minwax whitewash on top of that.

Final pieces for my walnut living room set.  C-shaped end tables that fit perfectly over the arms of the couches. They aren't large. Just enough to perch a glass of wine or snack plate when relaxing at the end of the day.

I built this for my son and his fiance. I am leaving the staining up to my son. It is only the 3rd or 4th piece of furniture I have built. I still have to build the match for it. I'm sure it will be much better, since I have learned from my mistakes with the first one. 

My boys have a small room, so once I saw these plans I knew I had to make them! I also used the plans for the rolling cubbies.

I have a small kitchen with no room for a table and no storage space. When I saw the plan for this kitchen island i knew it would fit perfectly in our space and a project my husband and I could work on together. It took several days in total, but we had to work around the kids, so probably could be done faster if need be. It is made out of white pine, including the top and legs. We probably spent around $150, but we looked at several similar islands going for over $600 and not even made with wood. We are so pleased with the outcome. We cannot wait to get started on the bunk beds for our son.

Thanks Ana White!

My husband and I have never built anything.  We decided to build our teenage boy a desk, as I could not find anything I liked online.  The project was pretty simple for amateurs to follow.  The cutting and assembly was done in a day.  We decided to add the drawer and pull out shelf for the printer.  Really, figuring what color to stain it and the staining process was the most tedious.  We routered the drawer sides and the top of the desk for a nicer look.  So proud of our work and the fact that this will last our son for years to come.