Community Brag Posts

Inspired by both Ana's Industrial Closet design and the Sliding Mirror Cabinet.

Making maximum use out of a small space, bought a mirror from Ikea and removed it from the existing frame, everything made in virgin wood from DIY store. Two tier clothes rail to separate big coats from other clothes, two height shelf system to accomodate sloped ceiling. A lot of fun to make!

Based on a combination of storage bed plans on this site and bit of imagination, we built this wonderful corner bed for our daughter. It took some time to get the measurements right (we had to convert everything to the metric system since we live in Europe) but it turned out great.

Although the bed is in the corner right now, we made the cubby holes on the side facing the wall anyway, just in case we want to move it to the middle of the room at a later date. For now, we just placed the corner board in front of those.

Thanks everybody for the wonderful plans!

This was our first project from Ana-White. I had a coffee table which I loved, but I inherited it from a dumpster years ago (great find!) and time finally caught up to it. I decided this time around I didn't want to spend over $300 on a "rustic" coffee table that everyone has. So my boyfriend and I decided if we were going to have a table that others have, it might as well be unique in the sense that we made it!

We split the time in about a 3 week period (we both work full-time so time in our house is at a minimum). We bought the wood, cut it, and used a Kreg Jig to start putting it all together. We had some trouble with perfecting the X's (as you'll see) as our saw didn't quite hit the angle. But we managed to get it done.

The most time consuming part was sanding, sanding, and sanding some more. We went with the oxidization finish which was kind of a pain... we probably will never do that again. The outcome wasn't all that much better than regular stain. Then we used poly on the top instead of wax so it would be more durable.

This table was inspired by one from Restoration Hardware. It was constucted using Fir and black pipe fittings from the local hardware store. Please check out more pics on my blog (I had trouble uploading them here due to file size). Thanks for looking!

I loved the idea of the storage sofa! Such an easy build and I tweaked the plans to fit my needs... I used 5" high density foam, I lengthened the sofa to 84" (so I wouldn't have any wasted foam and also so my extremely tall son could stretch out on it without his feet hanging off the edge), I used a 2x8 for the box, and used 1/2" plywood for the seat because 1/4" ply was too flexible. I also made the seat with a zippered cover to encase the foam, batting, and plywood. This way, I can easily remove it to wash it. It's my favorite place to sit while I'm working!

I loved the tall corner cabinet but hate to have my television out in view all of the time so I used the plans and made an additional door opening for the tv. I adore it and now have so much space I chat wait to tackle many more projects!

Loved making this...conquered my fear of doors and drawers during naptimes!

My partner purchased one of these benches for $100 at a shop in Michigan, but we gave up it over a year ago, and have missed it ever since. I decided to make one myself, using project board for the top and legs instead of 1x12s to make it sturdier. The bench will actually be used both indoors and out, but I applied Behr exterior paint to help it weather to elements.

Though it is tough to see in these pictures, the under layer of paint is actually a spring green, while the top coat is bright blue (both custom mixes), and the edges have been sanded. My partner wanted the V in the legs to remain green, and so they are. We're both very happy with the bench, and so glad we found the plans on this site. What a savings!

3'x3'x6".
Used to store all of those meds and vitamins and bandages for kids, adults, pets, etc.
Pine wood, painted stripe backer board, rubbed bronze hardware, dark stain and distressed white finish, seeded glass, adjustable shelves.

This was the first time my husband has build kitchen cabinets.  We have used many wood working plans from this website.  The cabinets are made of two sided prefinished maple wood.

I altered the nursery armoire and made this!

These were so easy to make. I actually messed up on the smaller one and used the 2x4's on the legs. By the time I realized it, I had to use the 2x3's on the top. I just used more of them. It still turned out great. My wife had me make another one for an empty space we had. I used the same basic layout and just modified my length and width. Thanks for the great plans.