Community Brag Posts

Bathroom vanity with vessel sink.  Made 32 inches high to have a vessel sink on top.  37 inches wide and 22 inches deep.

Hi friends!
 

Jen here from Jenwoodhouse.com, sharing some exciting, free plans! How adorable is this Easy Kids Indoor Playhouse? 

Is that not the most adorable thing you ever did see?

The tongue-and-groove planks!
The transom window!
The flower box!

Seriously. I can’t even. I am dying over here.

Your kids will love it. OR maybe just build yourself an adult sized one for when you need some me-time. No judgements here! 

If you want more details for this build, you can grab them on JenWoodhouse.com!

Be sure to tag me @jenwoodhouse if you share photos of your build on social media.

Schedule

I loved doing this project. I used Anna's plans but modified them just enough to help be with my biggest problem, stuffed animals! :) I increased the height by eight inches and cut one of the bead board panels just above the mattress. Next I attached the top panel using a piano hinge. Finally, I reinforced the bottom panel with an extra piece of 1x1 (horizontally) so that my daughter can climb in to and out of the corner unit and not crack the bottom bead board panel. She now has a place to put all her stuffed animals and as a bonus a new "secret hiding place.

To spruce up the storage beds and corner unit I added moulding to the front of everything and then painted everything cream colored to match her dresser. The molding took extra time, but it was well worth it! Because I increased the height of the corner unit I also added a thin piece of plywood behind each piece of bead board (heard boards) to help reinforce it and would support the weight of someone leaning back on the "head board". All in all it was a great project to work on, Anna's design plans were easy to read and allowed me to make adjustments when necessary without any trouble.

I created this pair of bookshelves from the Kids Storage Leg Desk plan for my two older children to help relieve their book clutter. I used the larger boards from a pallet and a couple of boards I scored at the local ReStore that had been abandoned from a bed frame for $4. With stains I had on hand, I think we did this for around $5. The pallet wood was shorter than the lengths given in the plan, so these book shelves were made at the height of 1/2 of a pallet board or about 22". They work great for what we need and when the kids outgrow these, I have one kid still under the age of two that can use it as a desk and all we'll need is to add the desktop.

I used red oak for this bed and finished it with danish oil (golden oak colour).  It turned out pretty well.  I decided to go without nails and screws, glue and biscuits for the joints and I used small dowels to hold the caps on the posts.  First project that I tired using only glue and biscuits and it wasn't that hard.  I also bought some bed rail hangers from Lee Valley to make the bed easier to take apart and put back together.  I used 2x2 for the slats because I don't have a box spring in the bed (to keep it lower since my son is only 2 1/2 at the time I built it).  If I put a box spring in there later, I'll change out the slats to something thinner.  Thanks for the plans, it worked out great.

I built the cedar shim headboard and bed for my daughter and her husband a few months ago.  It turned out so beautiful that I decided to make bedside tables to match.  I used the basic pattern with some adjustments to accommodate using a 1x8 for the drawer instead of a 1x6 to give more room for the shims.  

The final tables turned out even more beautiful than I could have imagined.  Thank you Anna for the patterns and the inspiration to create such beautiful gifts.

This was my very first project to take on with Ana's plans. It took a little longer than I would have liked only because I got frustrated and put it to the side for a MONTH. I realized how important it was to pre-drill my holes and then got the motivation to get back to it. Once I got started again, it was finished in NO TIME! I still need to stain one of them, but I couldn't be happier with the result.

Came out very nice , thanks Ana this plan! I love it! 

Built from Ana's Adirondack chairs from book.

Loved creating this- I was worried that it wouldn't come out well and I wasn't prepared for the amount of time it took to pick out my supplies, but it's done and I love it! Thanks for the plans and for everyone's brag photos- I loved seeing that others had done it and hoped I could, too.

While my wife was away for the weekend, the boys (3 year old twins) decided to surprise her with a new coffee table! We had to get rid of the old IKEA one due to its sharp edges... we've already had one ER visit and nine stitches! A few notes/things I learned: * Pay attention to which side of the wood you leave facing out. A lot of my boards had one smoother side and I accidentally put those face-down. Meant a lot more sanding. * A belt sander would have made this a lot easier. * I took care to round all the exposed outer edges with the sander. A router would have been better for this, as it took a lot of care to make sure they were even. * It's going to get about three coats of polyurethane now, but I still would recommend coasters. This thing is HEAVY. It will probably outlast me. :)

I followed the plans but modified for a king size. I upholstered my bed in a linen colored upholstery fabric and added the nailhead trim to the headboard. This is the most sturdy bed I have ever owned. I don’t know if I will ever be able to buy from a store again!!

This project is closest to the Simple Closet Organizer, but I wanted to be able to re-use the existing components of the closet. The only purchased materials were one sheet of cabinet grade plywood and dowel rod holders (since I already had paint and screws).

I wanted to build this sectional such that it could be used with or without cushions. I modified the backs so that pillows and cushions would not fall through. Because I wanted to use redwood rather than the cheaper pine stock, I had to rip the lumber myself out of 2x4s. This process was a little tedious and required some minor modifications because the stock was slightly thinner than production lumber. However, this saved me money because each cut list resulted in two chairs rather than one. I also built the ottomans, side tables, and potting tables using ana-white plans. Because I dimensioned the lumber myself, this project took considerably longer than the estimate on the plans. This was a fun project that I will enjoy for many years to come.

Adaptation to fit my little mitre saw, small workshop and the metric timber available in B&Q. My first build, this should let me build more while staying comfortable and safe. I'm ridiculously pleased with myself!

It took longer to build than expected because my little boy thinks naps are for wimps.

In case anyone in the UK wants to build similar, here's my adapted sizes.

18mm plywood cutting list:

2   85cm x 50cm (sides)

3    50cm x 50cm (shelves)

2    50cm x 60cm (leaves)

2    45cm x 30cm (leaf supports - replaced fancy brackets that were too expensive over here)

Timber cuts:

6  34mm x 34mm @ 50cm (cleats)

6  18mm x 70mm @ 52cm (supports)

2  18mm x 70mm @ 42cm (spacers) 

Been a while since I had time to actually build anything worth posting about! My wife wanted some items for her Kindergarten classroom this year, so built several items, most inspired by the Farmhouse family.