Community Brag Posts

Used your plans to do these for our mudroom I just remodeled.My wife loved them.Took the original plan and modified it to fit the corner.The bench ended up being white with a grey top.And for xmas my step mother made cushions for it.Love your plans.Thanks

Balustrade Coffee  Table made of cedar and pine wood. Approximately 49.5 length. Stained in special walnut and white painted chalk paint base. Used dark wax to distress base and legs. 

I needed a new laundry system, and thank goodness I found Ana White's projects on Pinterest! I incorporated the laundry sorter and added casters to the bottom as well as a paper towel roll on the side since it is next to the sink. I also used a modified version of the washer/dryer platform into my space. It does not have the bottom platform and the 4x4's are inside the 2x4's and attached to the platform as well as the 2x4's. Sterilite makes organizer drawers that fit exactly in the opening of under the platform. And, voila! New colors, new organization, new light bulbs :0), new laundry room!

We modified the original plnas to convert one set of front shelves into thread storage.  We used  1/4" wooden dowel cut to fit 2 spools of thread on each.  

Made this for my 14 month old, this was my first ever attempt at making/building anything! Hand painted and assembled with inspiration from the Tennessee Titans. My son loves standing in it by the window watching the trucks go by our house so I added his own jungle gym steering wheel and bike horn. 

Here it is. Our first building project (not attached to a wall) that we used plans for:) I am so happy with the way it turned out. We had been looking for a bench for months. I was thinking that I would find something I like, refinish it and then upholster the top. But then I came across this post from a wonderful blog (that I will be using TONS more ideas from) and knew that this was going to be our bench:) I am happy to say that I think I have finally found a hobby that we can ALL get use to:) The kids have fun, we have fun...and we actually walk away with a finished piece! Love that!

Thank you so much Ana for this plan. Our 2 year old is too big for a high chair and will not use a booster seat. He wants to be like his older sibilings and use a real chair. This was perfect because it is a real chair (no booster seat) and then we put a Mickey Mouse  on the back and he absolutely loves using it now. 

What a fantastic plan.  I made one for my granddaughter.  It has two advantages over the doll house I made years ago.  (1) It can be unstacked and shipped.  This one will be shipped.  (2) It allows the child to restack and rearrange rooms.  My grandaughter loves to rearrange things.  It is an "engineering inclination" according to her mother.  Well, she can rearrange these rooms as many times as she likes.

I made only one change to the published plan.  I expanded the rooms to 8" wide, 8" high and 16" long in order to accommodate a piece of furniture my son-in-law had already made.  Maintaining the 2-to-1 ratio keeps everything fitting together well.

Thank you again.

I loved this table the second I saw it and knew I had to build it. The only modification I did was adding an additional 2x10 to the table top to increase the width. It is a pretty substantial table but the table top is a really good size (makes folding laundry awesome!). 

Wife wanted something that matched the comforter colors but looked a little antique-y. So I made her this!

My wife loved the Benchwright table at pottery barn, and I did not love the price. Got a lot of ideas from this site and tried to make it my own. The outside and legs are made from 5"x5" Cypress, purchased from a local saw mill. I used a kreg jig on the entire thing along with lag bolts and glue. It is very heavy and I can jump up and down on it. Bought the hardware from Fastenal. Fun project, took about 16 hours total.

This is build 2 and I was really happy with how well it came together.  I used Douglas Fir again as it takes the vinegar and steel wool mixture really well.  This piece was hand waxed for a different look than my corner table.  I love the tight grain in the top and how the variations in the grain caused some of the wood to appear almost white while the rest of the top is very grey.

I made this from Anna White's plans. Thanks for your idea and the plans. It is made from Mahogany, Pine, and I used 1/4 aspen plywood for the back. I made the face frame (rails and stiles) with the Mahogany, and did mortise and tennon joinery and then attached to the shelving. I made the raised panel doors out of Mahogany also and made the crown moulding as the trim piece out of the same species. The shelving and back board is from pine and capped with mahogany trim on the shelf edge. The door knobs are not yet on in the picture, but I used solid wood round knobs and stained the same colour and located the knobs up near the top of the door stiles.

Stained in Dark Walnut Minwax Water based and finished in Varathane Semi Gloss water based.

My 7 year old daughter LOVES her new loft bed!!! It was a fun build. Plans were very accurate and simple to follow. Took a weekend to build and about 5 nights to paint.
Next I plan on building a desk and some shelves under the bed. More pics to come!

We built our coffee table to match our farmhouse entry table! I love the tutorials from Ana White! We made changes to the bottom shelf and used 2x2 slats instead of the 1x12 pieces. Also changed the dimensions so it measures about 56x34 (kept the height the same). It complements our living room perfectly! I can't wait to built end tables next! 

I used the Clara Table design then decided to make the table top into a lego table. I bought (4) Lego Plates from Target at $15 each. Then super glued the Lego Plates onto the tabletop.

*** Note- Make sure that the spacing between Lego Plates is correct. I used different Lego's to connect the different plates to make sure that the spacing was correct.

Thanks for the ideas Ana!

i was able to rescue a few doors out of a roughly 140 year old house.  so the idea of a head and footboard came to mind.   the headboard is oak was the front door, and the footboard is pine from bedroom.  these were not taken apart just sanded cut to length and finished.   now everyone around me wants a pair.