Community Brag Posts

I made this for the sitting area in our master bedroom. I liked it because my wife and I can use it as a bench to sit and read on and also as a bed if we have the whole family over for the holidays and my guest bed and the kids' beds are taken. Overall this was around $100 and it took me two whole days to finish. I worked pretty much all day both days. I would say in total about 16 hours. Measuring and cutting was the largest part of the time. I made the mistake of cutting the trim before I made the boxes and was left with about an extra quarter inch in between most of the trim pieces. I filled this in with sandable paintable caulk and it did the trick. If you have any other questions please let me know. Thanks!

So... I am a pretty dedicated baseball card collector as well as a new found hobbiest in wood building. It's been an ongoing issue in my household with my baseball cards and boxes cluttering up our dining room. I decided to resolve the issue while still being able to keep my cards in the same room with even easier access without being an eye sore! This just might have saved my marriage! I searched for months for plans for some sort of baseball card cabinet but they just did not exist. The closest I could find for what I was looking for was a storage bench plan here on Ana White. I liked the idea of a top opening for hidden storage. It was too small for what I needed. I then came across plans on another site for an aquarium stand cabinet. I figured the combination of these two projects was what I was looking for. After a week of planing and drafting and 3 weeks of construction/finishing in the little spare time I have, I created what you see. People in the card collecting forums I'm a member of are begging for plans or for me to build them one! Problem is, this is the first thing I have built following my own design and plans. I could pass these on but no one in their right mind would be able to follow my scratches on paper but myself! I'm extremely proud of the outcome but am looking for a way to come up with plans I can share! Hope you all like, and if I can come up with a way to make follow able plans I will share! This was all assembled using the kreg jig system, wood filler to hide the knots and lines where the wood joined and lots of sanding!

Farmhouse Bedside Table for nursing room.

I made these based off the Brook laundry basket dresser plans. I did notice that the bottom rung placement measurement is about an inch off if you want your baskets spaced evenly, so I moved it an inch higher, which made them all very close.

The only other thing I changed about the plans was to add some decorative trim molding to the front edges where the raw plywood edge would have been. Plywood these days isn't of the best quality, so that rougher edge would have bothered me.

I primed by hand (it took six hours!!) and then decided to use spray paint for the top coat. It was a good decision-- the finish was much smoother than a brush, and it took less time to spray around the rungs than it did to brush them. It was also about half the price for the paint.

If I were to make these again, I would paint the insides before assembling the dressers. The painting part was by far the most difficult of the project. Painting while they aren't in a box formation would have been so much easier, and I could have touched any little spots up after assembly if needed.

More details can be found on my blog post: http://www.stitchfancy.com/2012/08/04/laundry-basket-dressers/

We had some unused space behind our front door and not enough room in the entryway closet. So we found a mud room plan and... voilà. We now have a place for backpacks, jackets, and shoes. We still need to put in the "T" into the bottom cubby for a shoe tree. We made sure to add 1/4 round trim to snug it seemlessly against the wall and 1/2 round for the face.

Queen sized.

Looks wonderfull with satin finish

Small shelf for herbs or small flowers. About 12" wide and 7" high. The shelf itself is about 3,5" deep.
The small pots are from the local supermarket, and cost under 1 $ each.
Wood is from old pallets, and mahgoany stain.

We needed extra seating for friends to come over for football game days, so I took the outdoor chair plans and decided to use it for a den chair. Simple build, but I did add some 1x3 boards on the rails for more comfortable armrests. Add some appropriate color cushions and it's ready for football season! Quick assembly, but as usual, staining and clear-coating took the bulk of the time spent.

I wanted a tv/ fireplace for Christmas and my husband built this using your plans. I love it!

So far we are in absolute love with this bed! It was a easy quick project that was fun to do. Made an adjustment so that we could fit the box spring in the frame. We also used the bed rail brackets from Rockler. http://www.rockler.com/product.cfm?page=11&site=ROCKLER

I got a miter saw for mother's day this year! This is the first project I made with it. We needed some accessible storage in the bathroom and this works out perfect

I loosely based them on the flat wall bookshelves and made them the right width to fit on the door. I used scrap wood and lathe that we had laying around to make both shelves.

I made this a little wider than the plans so that my kids could use it as an art and game table.

This project went pretty quick. I've learned how important it is to make super accurate cuts while making a carcass and inserts for it so I didn't have to "fix" as much along the way for this piece, yay for progress! The only amendment I made was adding drawer glides because this will be in my toddler's room so I didn't want the drawers to be able to come out all the way. I used mostly scrap wood I had that just needed to be ripped to the right size for all the framing pieces so all we actually had to buy was the 3/4" ply! And it cleaned up my scrap pile nicely too!

I built this off of the benchwright media console from PB and the benchmark media console plans and tweeted them slightly for my preferences

Built 2nd bookcase. This one for youngest granddaughter.

Mudbone1959

Perfect table for the kiddo.

A couple of months ago I built a farmhouse table for our dining room. Now that we've moved into our house and have more space, I've put together the bench too. I used 2x6's for the top and 2x4's for the legs. When I put the legs on, it didn't feel sturdy enough so I added some 2x2 braces for support. I wasn't sure how they would look at first, but they really add a cool dimension to the bench.

Grandy Console with handmade hardware