Community Brag Posts

I followed the plan, and used plain pine wood.  The wood cost $106 at my local Home Depot.  The Kreg R3 Jr. Jig, Clamp and Screws I already had from a previous project. This is a weekend project.  Biggest obstacle here is to make sure the shelves stay level.  After it was built I sanded everything with 180 grit before going to the staining step.

Stain...  I made a pot of STRONG Tetly Black Tea and painted the entire table.  I decided to go with this Oxidizing Stain (http://www.sweetpickinsfurniture.com/2011/01/how-to-weather-new-wood.ht…) for the wood.  The Black Tea increases the tannins in the wood, which makes a stronger reaction in the woodgrain after you apply the oxidizing solution.  After the solution dried I sanded lightly with 180 grit again and now it's ready for Wipe-On Poly to be applied.

Just one small hint.. The Oxidizing Solution takes a few days to react, so plan accordingly.  I let mine set for 7 days before use.

Thank you for helping our family stay organized and keeping our entryway clean.

Used the cedar concept from a grilling station project to create a wine wall from cedar fencing. - Chris K

Here is the Easy Kitchen Island all finished. I learned to use my k-reg with this project. To attach the top I instead used corner blocks in each corner of the bottom unit and screwed the top in place. I found this made the piece more sturdy. for the 1x2's I used furring strips which are not very nice however I painstakingly picked through a large pile till I found ones that were straight and without knots. I then had to sand them like crazy. Saved a ton of money but worked very hard. This project actually took 19 - 1x2's rather than what the plan called for. When complete this piece was very heavy...I love it and have found the perfect home for it.
Thanks again Ana!
Janet

Rustic tv stand made from pallets and reclaimed ship lap and 2x4's

I used cedar, stainless steel rails and finished with marine spar varnish.  Gave to my son for Christmas to hold his smoker/barbeque!   Thanks for the super project idea!

Took the farm house desk and mirrored it. It has four file drawers and a desk drawer on each end. The frame and drawers are clear coat polyurethane and the desktop is stained chestnut with warm satin polycrylic clear coat. - 

After my daughter started escaping from her crib I knew it was time to build her a new bed. I didn't think she was quite ready for a full size yet so I thought a toddler size would work for at least the next year.

I started with the Traditional Toddler Bed plans and scaled down the size of the Rustic Headboard and incorporated that. The biggest thing I learned in the process was to measure your mattress first! I don't think I realized the size variation in crib mattresses and ended up having to recut my slats and rails to accommodate my larger mattress. Also, our mattress is 5 inches deep, which means that the safety rails only extend about an inch over the top of the bed. This seems to be fine for my daughter and she hasn't fallen out - yet - but I think if you have a very restless sleeper or just want to play it safe, you might want to add an extra inch or two to the height of the guardrails.

I also used a 2 x 6 for the foot rail as this allowed the legs to be inset further and gave it a more solid look on the bottom.

This was an easy build and I'm so happy with the finish. I used Hilary's oxidizing vinegar solution first. I didn't feel it was "grey" enough so I put on a coat of Minwax Weathered Grey. Let dry. Added a coat of Minwac Special Walnut and finished with Pastewax. Love, love, love!  They are very sturdy!

My wife wanted an island so bad and didn't like any of the plans but this one. This was my first big project but it worked out well. In the front middle section, I went with a two trash can sliding cabinet. Took me around 36 hours to complete. I also found plans for tall bar stools that I used and made the chairs with the island. We found a stone place that had scrap granite that we bought cut to size. My wife loves it. Great Christmas present!! 

So we wanted to build a simple twin size bed for our 5 year old son. That quickly expanded into my wife wanting me to build this PB replica (which happens to be her favorite kids bed). My response was "honey, you really don't understand my lack of ability." She insisted and after a couple of weeks the bed is done! Using Ana's plans made this not only doable but much easier than I thought (this was my first build).

We changed the design very slightly because the original was a few inches too tall (we have a ceiling fan that would have hit the top). We simply shortened the top half of the bed by 3 inches. At the suggestion of a friend (who's mitre and table saws we used for the cuts) we used dado instead of pocket holes for the stairs. We also used a lot of countersinking instead of pocket holes (for example to attach the vertical slats on the side walls).

We bought the cheapest wood we could get at Home Depot. All the wood and stain and materials cost about $250-300 (I still haven't checked the receipts exactly). However, I was told (quite sternly) that I severely overpaid for the wood by not going to a lumber yard. We used a Minwax oil-based stain (mission oak). We only did one coat.

Now that we're done with this we can't wait to get started on the next project (right after I get my dissertation going).

I love this, so did our son.

Had oak from my family farm that made up the top and trimwork. Purchased oak board for the legs. Sides and middle/bottom shelf from maple plywood. Decided against the flip down doors. Wasn't happy with he fit of the main doors due to a little off-kilter craftsmanship on my part, so will probably leave it open and add crates / some shelves the same height as the top row giving like 6", 6", and 11" or so.

This is the queen size version of the farmhouse bed with a natural finish. The plans were modified somewhat to account for the use of a box spring. The actual construction probably took less than a day of total project time, but the sanding, staining, and finishing were quite lengthy. My husband and I used both an electric sander and also sanded by hand. There are two layers of natural stain and three layers of polycrylic (with sanding in between each layer of the polycrylic). It turned out beautiful! Ana, thank you for the inspiration!

Just a couple of pictures from our kitchen remodel. My husband and I have built 59 cabinet doors for our house, kitchen, laundry and two baths. The cost of wood only $604 , we chose to use finished ply for the panels and poplar for the stiles and rails. We could not have done this with out Ana, thank you from the bottom of my heart!

We are still in the process of our remodel, but I wanted to show what a little time, sweat and very little $$ (compared to the $10,000 + quote) can get you with determination and a few basic skills.

Built 4 foot kitchen island. Used mix of cedar (2x6 decking)for top and rest was Douglas fir wood from home depot. Legs were 2x6 nailed to 2x4 Doug fir wood. 1x4 pine was used for the shelves. Measured distance to hold wine bottles. Cost approximately $100.00 in wood. Miniwax ebony and jacobean was used for stain. About 50/50 mix. Epifanes wood gloss was used to varnish. It's a superior product to use, however can be pricey. Can use a poly if concerned about costs.