Needed to do a little spring cleaning in the garage and organization.
Chose to adapt Ana's JOY Christmas sign since I had to make 16 of them. Used barn boards and some pallet boards and also taught myself how to do wood- burning to outline the letters. Thanks for the great idea!
I loved working on this easy upholstered bench. It was so much fun and so simple. I followed the plan except I raised the bench to 20 inches, because my husband and I are quite tall. I also wrapped the fabric underneath about 1/2 inch and stapled it so it has a tighter look. Thanks for the plans Ana!
Wed, 10/26/2011 - 05:57
That is so cute, you picked a tricky fabric with the lines!
I had a ton of fun making this media console! It is my second big project, and I would still consider myself a beginner, but I paid very close attention to detail and I think it turned out great!
I stretched the console out by about 4 inches, so that if I ever decide to put my TV on it, it will fit.
Thanks Ana for your great website!
I built this table back in May so a little late posting. It is the second Modern Farm Table that I've built. The first was built for my sister and this one for my nephew and his partner. I am very happy and so are they with how it turned out. Thanks again Ana for your plans.
Love how this turned out! Great build, added a back to the table. It looks awesome in our living room.
Wed, 10/23/2013 - 17:48
Really nice finish. I am planning on building a table and I want the tabletop to look just like yours. I have never stained, but when you say rub stain and wipe immediately, what do you use to rub? Also what type of wood did you use for the top? Again, great job.
This was my first project, probably a little ambitious for a first project but the plans made it super easy. As soon as I was done with the 4 chairs (two armless and two corners), I immediately made two tables that we have used as side tables, as a single table and as seats. It was dirt cheap to make, probably less than $100 for everything, that’s a complete steal. The cushions cost twice as much as the entire build.
Thanks again to Ana White we learned the skills to create our pantry unit.
Sat, 02/25/2023 - 17:17
WOW, this is incredible, thank you for posting your project!
Our big old house doesn't have a front hall closet, so I decided to make the Nursery Armoire for our extra coats and shoes. Since our ceilings are so tall I decided to make it the full 96" that I could get out've the sheet of plywood.
I also modified the plan to adjust the door heights so that the top would make good coat hanging and the bottom can be used for shoes and boots. I also changed the drawers to be on the outside instead of behind the upper doors.
I used 3/4" plywood for the box and pine for the doors and trim.
For the doors I pocket holed the frames and then routed an edge on the backside and stapled pine paneling to fill out the middle. This matches doors I made previously to make cupboards in our full-wall brick fireplace (and the hardware matches too).
I did the top trim as in the plan, and I decided to leave the bottom plain.
It's quite large! But in the space a smaller one would've looked silly, so I'm glad I went with the height.
I decided to paint it so that I didn't have to fuss with staining, but went with the same paint as the walls for the backs and undersides of shelves to lighten it up.
Can't wait to fill it up! ....just have to give the dark paint one more go-over....
Mon, 11/07/2011 - 22:32
And it will add so much function to the space. Don't you love old houses ;)
Our mud room/laundry room is very busy with 2 boys and 2 adults. Scarves, gloves and hats are generally tossed here or there, usually far and wide when it comes to my boys.
My solution was a coat rack with cubby. Like most of my creations, it is a Kelley Special, all up in my head. I don't have plans, although I will make some when I make the next ones for me and my husband.
I used poplar 1x4's for the sides, bottom and back attachment and 1x6's for the front where coat hooks will be mounted, 2 small coat hooks on the sides, wood glue, and pocket holes to construct it.
If you add the time I spent on it, it didn't take too long, but it took a while since it was a few minutes here and a few minutes there. I am very happy with the final product, and we are starting to test it out now that the weather is cold again.
If you want to see more pictures take a swing by my blog: www.trekkiemom.com
perfect nightstand for our guest bedroom. We love how easy the plans are. It was exactly what we were looking for and the cost to build was around $40.
Check out how I made this X base console table:
Thank you so much for the plans. We enjoyed building it. We love it!!!
I made this as a gift for a friends Baby Shower. It's meant to mount on the wall and hold Baby's stuffed animals. After the Shower yesterday, it's half full of animals already!
I used pine, and a "walnut" stain by minwax. We only stained the structure part so the bars would look like they were a different material. I also used glue, a staple gun and my Ryobi Airstrike automatic nailer - it's a new toy for me, but one I'm in love with already :)
Please feel free to click over to my blog for details on how to help build yours! ---> http://projectjumanji.blogspot.ca/2013/10/what-ive-been-up-to.html
Enjoyed building this. Quite simple but well received. Thanks, Ana. - Dick
After being "so done" with the original closet that came with the home, I decided to rip out all the wire shelving and make a custom closet out of 1x4s and 2x4s. I pre-stained all the boards and cut to custom lengths. I kept the integrity height for the shelves of 42" and 84". Instead of using galvanized pipe, I used Halefe Premium Oval closet rods. In the end, I have a very stout closet and a much better use of space.
For the small shelf beside the window, I used 1x4s cut to custom length. Under the hanging shelves, there will be a shoe rack.
I built that table for a friend using primarily hand tools. The only power tools were a table saw to rip the legs from a scrap 2x12 from another project, and a drill for draw-bore holes.
The table is made from pine, so that it is light enough for a woman of small stature to carry it up to a third-floor apartment. The frame is made with mortise and tenon joinery for strength, and the joints are draw-bored to make sure it doesn't fall apart in our lifetime.
The top is a glued-up panel from five other boards. This was my first panel glue up, so it was a little bit exciting in the same way that a kitchen fire is exciting. The surface has a rustic texture, made by planing it smooth with a cambered jack plane. The texture isn't visible under normal lighting, but with a raking light you can see it. It's very interesting to run your fingers over this table because of the texture from the plane, and the strong grain of the white pine.
I made these back in February. I came across this project on Jamie's site (http://thatsmyletter.blogspot.com.au/2012/10/t-is-for-trug-naked-versio…) earlier in the year and thought that it would make a fantastic birthday gift for my 6 year old nephew. I gave it to him in kit form complete with nails and glue so that he could assemble it himself. I predrilled the nail holes. Of course I then had to make one for my own 6 year old so that they could build them together. I adjusted the size to accommodate some tools my dad had given them for Christmas. Time indicated includes personalisation time.
I've had a bit of practice painting names since this project. Each time I get better at it.
.
Loved this project. Not completely done. Still need to acrylic our name and poly the whole thing.
