Community Brag Posts

I wanted to make a table for our daughters birthday to put a spread of food on.
I went out in search for pallets and threw a quick sketch together and brought it to life.

Currently it is my computer table, but only for the next week then on to it's purpose.

Start to finish took 3 days

This was the first furniture project I have ever done. My wife seen this at Pier 1, of course it was all particle board and pine and "cheap feeling" but not cheap in price. She showed me the one on here and of course I was up for it. The deal was, I make it she paints it and of course I need a miter saw. Probably would not make this my first project because it was a bit challenging. Getting the long cuts square with a circular saw proved challenging and getting the squares on the back square was tough. With it being oak I learned that oak is not forgiving, especially without a nail gun. The pocket hole jig and their application are great and easy though. It did take me a while due to time constraints and the price to build may be off because I really didn't count as I bought things. All in all, I use this piece of furniture everyday. It is the first thing you see when you walk in the house and I am very proud of it, as is my wife. She did a great job with the finish and the glaze really gives it a nice look. The hooks are cast iron that we got at an antique store. This is the only picture I took, no in-process pics.

I built it twice for my son and nephew, both love it and use it every day.

I have been needing to create more storage, while organizing my craft/spare bedroom. I had a piece of pegboard, and got some inspiration while pouring over Pinterest.

I decided to venture out and try something really new to me - routing. Bear in mind I only have a Dremel with the cheap router attachment - not the routing table thing. I'm happy to say it came out great! I have more pictures i'll upload soon of the actual routing. I did craft up a jig of sorts to keep my routing line (or whatever its called) straight. I did run into some math errors, which resulting in me having to cut things down a couple times. But now I know how things work when piecing together routed frames.

I had 2 pieces of 1x12x36. To keep the routing lines as even as possible, I did the the routing before I cut the pieces.

I used my Kreg Jig to join the sides. I assembled by attaching the 2 sides and the bottom. Then slide the pegboard in, and attached the top piece. Then since my routing line was a bit wider that the pegboard, I used caulk in the back to fill it in, keeping the pegboard nice and tight.

I plan to add doors to the cabinet at a later date. Right now it definitely fills my needs!

It was friends son's first birthday and had no idea what a could get a couple that didn't like gifts, or many toys for that matter. I search the site and stumbled upon this great addition to any little boys room, an airplane shelf! So it took me about 2 hours to make it with taking break for things to dry, and I didn't follow the exact directions just because I didn't have all of the items, in fact it was all from scraps I had around the house and the front round piece was actually the top of a peanut butter jar painted.

Used the plans for teh x-table, but left out the Xes and opted for 2x4 pieces on each side to fill the gap. Went "fancy" and made it two tone for added interest. Have developed my "signature look" of staining over paint for the base.

I made the farmhouse bed and I love how it turned out.

Toy box for our kids that someday will become a blanket box or something else around the house. Customized with the S for our last name. Use a piano hinge and folding lid support on one side. Made another for our friends with the West Virginia logo.

I built this for our laundry sorting needs using the Brook 4 tall and lengthwise plan. I modified the plan to take the baskets width wise, added a little more distance between baskets, and added guide rails above each basket (except the top one) to allow them to be partial pulled out without flipping out. I also beveled and slightly rounded the front of the guide rails just for looks. I think it turned out pretty good for my first woodworking project.
 

Made the planter boxes. Very easy and the stain makes them look great.

I came across your plans Ana for this dress up Station. My Daughters 2nd birthday was this month and I thought this would be a perfect gift. Your plans were so easy to follow and it came out perfect...she loved it! I'll definitely be back for more do-it-yourself projects from you.

Thanks so much for the inspiration!

I gotta be honest, I'm kind in love with the farmhouse collection and when i saw this little bed i knew i had to build it for my 2years old and he loves it. It is so perfect for him, not too big and not too small. The bed was very easy to build, affordable and very strong ( trust me, my son makes me lay down there with him sometimes so he can go to sleep) . I changed the plans for a 28" wide crib mattress after reading all the comments, but it was really easy to do. I'm very happy how it came out.
Thank you Ana for sharing all the amazing plans with us and i'm looking forward to start building more furniture soon, my to-do-list is just getting longer and longer lol.
Thank You Ana XOXOXO

My husband made this for my daughter and her friend to have stables at each house for their horses.  We painted the roof with blackboard paint to making decorating fun and creative.

Had to adapt sizes slightly as timber in the UK is sold in metres, not feet -so the lengths are slightly shorter but really pleased with the result!

This project took a little more time than expected. Being new at this I'm definitely not efficient yet. Sanding and staining took the longest. Though the plans said to put it together in the room then sand and stain, we chose to stain it outside then put it together, so to avoid the mess in the room (renting and couldn't risk it!). That worked well for us. We also added 5 inches to the height so some day it could be converted into a full bunk bed. For some joints we should have used 2" screws rather than the 2 1/2" suggested in the plans, some of the screws went all the way through to the other side.  We used key hole plates to attach the stairs to the platform to make it easy to take apart and put together. We also adde 45 degree braces to support the extra height and an extra brace around 3 sides of the bottom which will one day be the frame for the bottom bunk. It worked really well. The boys love it!

I took Ana's awesome queen-sized storage bed plans and jut made a couple minor tweaks for my full. Our bedroom is TINY, so I wanted queen (or king) sized drawers/cubbies, which means I kept 20" depth. The side boxes run 53" in length, 54" for the end. I used poplar ply for the boxes, red oak for the trim, and I stained everything with a Varathane Early American wood stain, followed by a couple coats of polycrylic. It came out beautifully, and I love how easy it is to move around and set up.

For the final step, I'm still debating adding drawers or doors, which would hinge on the bottom and secure with cabinet magnets. I'm leaning toward the latter just because our bedroom is so small it will make accessibility a bit easier.

made this for the garage...burnt the wood for rustic look