Community Brag Posts

9 ft Fancy X with Bench

Submitted by Anonymous (not verified) on Mon, 01/18/2021 - 19:08

9 ft fancy x farmhouse table with breadboard ends.

Built from Plan(s)
Estimated Cost
$500
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax early American mixed with special walnut.

Base: rustoleum spray paint in heirloom white.

Both sealed with Minwax polycrylic satin finish.
Recommended Skill Level
Intermediate

Comments

Toddler Bed

Submitted by Delilah on Sat, 12/20/2014 - 10:52

We used the idea of the traditional wood toddler bed but modified it to get the look we were going for.

Built from Plan(s)
Estimated Cost
150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
minwax natural wood stain and satin poly
Recommended Skill Level
Beginner

Comments

Grandy console

Submitted by Anonymous (not verified) on Tue, 03/21/2017 - 06:13

I took a different direction on the doors instead of using the barn doors I used old wooden windows in place of them. 

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Rustic Adirondack Chair... Nailed it!

My first project using Ana's plans and they were easy to follow! I feel great about the project and plan to expand on it. I may double the width and make a little Adirondack bench seat!

Estimated Cost
$50 with hardware
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Mahogany stain and polyurethane

Farmhouse queen sized bed

Submitted by Miaya39047 on Sat, 02/16/2013 - 21:27

This project cost about 120.00 to make and about a weekend to build it. Plans make it very easy and it's beautiful and sturdy. I painted it antique white and used 1 coat of polycrylic on it.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Comments

Seasonal And Holiday

Modern bench

Submitted by Anonymous (not verified) on Fri, 03/24/2017 - 16:11

easy and fun .. our front porch loves it

Estimated Cost
40
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Kitchen Island with pallet wood

Submitted by Anonymous (not verified) on Sat, 01/23/2021 - 19:35

After following Ana Whit and other bloggers for a long time i figured my skills were at a level to try an advanced build like the Kitchen Island.. But i also wanted to challenge myself even more and was determined to make it from as much reclaimed wood as i could, mainly pallet wood.
With a lot of modifications to make it work i think I got a good result from these plans.

While i used as much reclaimed wood as i could, i still needed some clean 2x4's , 2x2's

Built from Plan(s)
Estimated Cost
$50
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I burned the top and used a cup wire brush on an angle grinder to get the effect of barn wood. then a couple coats of lacquer on the top. And a spray finish of polyacrylic for everything else.
chalk pain ( linin) to do the White wash
Recommended Skill Level
Advanced

Pub table Stools

Submitted by adecesare4 on Mon, 02/18/2013 - 11:33

As stated in my table post, I just wasn't happy with what I was finding in the stores as nothing seamed sturdy nor made out of solid material. So I built a pub table and these stools to match.

I combined the stools from multiple projects and eventually just made my own measurements and mimicked the table construction that I made.

Although more expensive, I used Oak so it is sturdy and will take more than normal wear and tear (as I have three young boys under 10)

Estimated Cost
maybe $40 a stool
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rustoleum Traditional Cherry
Minwax Polyacrylic
Recommended Skill Level
Intermediate

Comments

Cabin Bed for Toddler

Submitted by Anonymous (not verified) on Sun, 03/26/2017 - 19:33

Loved the twin sized cabin bed but my grandson is a few years away from needing a big boy bed.  Husband scaled down the plans and this  is what we came up with. 

Estimated Cost
$150
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Farm Table

Submitted by jjjsquared on Wed, 02/20/2013 - 13:52

This was my husband and I's first furniture building exercise. We've been looking at farm tables but the prices were astronomical ($500 to 1,000+)! So, we came across this plan and thought maybe we could do it. And we did!

It took us about a weekend...we have two kids - ages 3 and 6...so we have frequent interruptions...including my daughter spilling my brand new quart of paint...so another trip to Home Depot.

We made some alterations to the plans...to fit our needs.

List of Alterations:
- Moved apron back (and would move it back more if I built again) 1" further.
- Added another stretcher on the bottom so that we could put a shelf there. We will probably add wood to the shelf in the future. Another blogger used a free pallet that he took apart. Seems like a good idea. Also moved the stretchers toward the back so that stools can sit under the table and be out of the way. Our table (as seen in the pictures) is up against a wall...so it made sense.
- Didn't add breadboard - the look was too finished for us.
- Used 1", 2x6 pine boards for two reasons - 1) liked the thinner material. 2) needed a smaller table than then 2x8's would let me do.

Tools:
We did have to buy tools to accomplish this project. My husband has a lot but obviously not enough.
- Purchased a table top miter saw - Harbor Freight - $89 on sale. Our circular saw just wasn't powerful enough (battery operated) and too hard to use.
- Purchased the full Kreg Jit (because it has the clamp mechanism) - $99

Thanks for looking!

Built from Plan(s)
Estimated Cost
$100 if no tools need to be purchased. Add $100 for miter saw (Harbor Freight), Add $100 for Kreg Jig
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
STAIN
TABLETOP
Stain-----
Early American - Varathane with Poly Coat in One (this went on really nice!)
2 Coats - No wood conditioner needed
Note: This is the underside of the table - two beams have two coats, three beams have one coat. I'm experimenting on making my table top messy - like a real work bench. See my on purpose stains. The real table top is underneath for right now. Will post that soon!

BODY
Paint-----
Behr - Cathedral Gray
Recommended Skill Level
Beginner

Comments

Storage Bed Collection for son

Submitted by nmsigman on Mon, 12/29/2014 - 09:00

Built from the storage bed collection as one of my sons Christmas presents. He loved it so much he cried. This is the first project that I have built and I think that it went rather well. I can honestly say I am now hooked.
 

Estimated Cost
It cost around $600-$700
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Wood Filler, Cognac wood stain.
Recommended Skill Level
Beginner

Cabin bed

Submitted by Anonymous (not verified) on Tue, 03/28/2017 - 13:11

Hello everyone

Just wanted to thank everyone for there great cabin beds and anna white for the amazing plans. My husband and I found them super easy to follow and create. I highly reccomend some stairs our little guy is still only 20 months hes a little short getting in and out... currently the step stools working great.

We had a blast making it ! 

Estimated Cost
400.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I used weather grey stain and finished it with a non-toxic wax
Recommended Skill Level
Intermediate

The Modern Adirondack Leg and Foot Rest

Submitted by prelude on Fri, 02/05/2021 - 03:33

This Leg and Foot Rest is a perfect addition to the Modern Adirondack Chair designed by Ana White. Using the same basic design, the Leg and Foot Rest allows you to put up your legs and feet for added comfort while relaxing around the fire pit or patio.

Plans were created using SketchUp and include Shopping and Cut Lists.

For more details, contact Custom Wood Creations at https://gmarmo48.wixsite.com/mysite or write to us at [email protected]

Estimated Cost
100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Exterior paint or stain
Recommended Skill Level
Beginner

Comments

Kid's Country Bench

Submitted by Jennifer G on Sat, 02/23/2013 - 11:23

I built this Kid's Country Bench for my son's play corner in my living room. It was so easy! The hardest part about it was waiting for the finish to dry lol. My 3 year old was able to help with a few things and he absolutely loves it! Thank you so much Ana!

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
I used Minwax Early American Stain and Minwax Satin Spray Poly for the finish
Recommended Skill Level
Starter Project

Xmas Tree Shelf

Submitted by Anonymous (not verified) on Wed, 03/29/2017 - 16:43

I have this wood I saved from a gate I took down for my parents. It had been up for 20 years, and the wood had taken a beating from the weather, but I couldn't throw it away. I made this Xmas tree shelf for my daughter for Christmas. I really liked the look of the raw, weathered wood. I didn't even take the lichen off. Luckily she loves the weathered look, too.

Built from Plan(s)
Estimated Cost
I made this from salvaged wood and a scrap piece of plywood. I had the nails and screws. So, total cost would be a couple of bucks for the nails and screws.
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None
Recommended Skill Level
Beginner

Mini fridge cabinet!

Submitted by mckaylia on Fri, 02/12/2021 - 16:47

Love this new piece in our game room. It was my husband's first time using the Kreg tool and it went relatively smoothly!

Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Dark stain was Kona.
Light stain was Early American.
We used a satin polyurethane.
Recommended Skill Level
Intermediate

My First Build

Submitted by jcdixon910 on Mon, 02/25/2013 - 09:22

This was my first real build. I used the Kreg pocket hole system and it worked great! With Ana's instructions and the Kreg Jig it went together in a couple of hours! Thanks, Ana for your great site and plans!

Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Beginner

Cedar Box

Well now that I've been off for a couple weeks during the holidays and starting to build the kids all want something. So I made them some boxes. 

The 2-drawer was the most time consuming. Made from 1 Cedar picket fence. 

The others 2 where just from scraps left over from other projects. 

Estimated Cost
$3
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Dark Walnut on one box. Some leftover blue my daughter found for the box that she painted.
Recommended Skill Level
Beginner

Comments

JoanneS

Sat, 01/03/2015 - 17:10

Love all the boxes you built for your family, great job! Those octagon shaped pulls are awesome!

Full size Daybed (Hailey hybrid)

Submitted by Anonymous (not verified) on Sun, 04/02/2017 - 08:44

 This is a hybrid between the Hailey daybed and the Hailey platform bed. My son is in love with this bed! Used aluminum diamond plate for the headboard. 

Estimated Cost
$175
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Rustoleum primer, black paint (3 coats) and clear finish. Aluminum diamond plate headboard. Lots of sanding. Used sponge roller for smooth finish. Cut diamond plate into three sections because I found a 2'x4' piece on Amazon for $22. One that spanned the length of the headboard (73") was $100!
Recommended Skill Level
Intermediate