Community Brag Posts

I made this dresser for a young lady who has never had any furniture unless it came from IKEA. Time to mix it up a little.  She was very delighted. The bulk of the dresser is poplar plywood with decorative birch trim.  I had trouble matching the paint color she wanted so I experimented by buying paint as close as I could find to the shade of grey she wanted and then mixed it with paint I had in the shop until I got the desired result.  I'm  no master at mixing paints.  I simply got lucky.  I traced out the decorative top using my wife's China serving platter and then routered the edge. Turned out OK and my wife was none the wiser.

We loved the look of the farmhouse x table but my wife liked the slatted look of pallet furniture, so I replaced the 1x12 boards on the bottom with 1x4 cross pieces. I also changed the dimensions somewhat to fit in the space intended for the table so I got rid of the x frames on the ends because their angles changed with the dimensions of he table. Now our cabin looks even more rustic!

This bench is the first project I have built from Ana White's plans, and I love how it turned out! The cutting list and instructions were very easy to follow. The most difficult thing about this project was the staining and painting, which I admit I have never been great at. I built this bench because my fiance and I needed additional outside seating on our patio for a party we threw, and I literally built it the day before! A week after the party I gave it to my fiance's daughter who wanted it as an indoor hall bench for her house. At first I was sad to give it up, but I figure I can easily make another! Thank you so much, Ana, for the fabulous plans you provide!!

Dog bowls made from scrap wood!  Super Easy!

Pretty happy with how it turned out. Will take our 4 year year old a bit to get comfortable with the ladder. Wish our room was long enough to add the stairs. Good plans though and thank you Ana White for making them available online.

This is a combination and a scaled down version of a couple different farmhouse table plans. It is 60"x43" to fit our dining room. I integrated an inlay looking piece into the top with a 1x2 and mitered the corners of the outer two layers. The thickness at the edge of the table was accomplished with 1x4's with the middle layer inset by 1/2"... chairs to match are in the process of being built.

Modified the arm rest and the back to my liking. 

Used the plans to build a custom tv Console for a customer. Black Cherry stain with HTP top coat. Added support pieces under the shelving.

Child's adirondack chair. I made it mostly with wood scraps purchased at my local Habitat for Humanity Store

My boyfriend built this for me as a birthday gift. It is absolutely beautiful, he did a great job - especially with limited carpentry experience! The top is stained with pickled white stain tinted with gray, and the bottom is painted white.

I made this based on the $55 fancy x desk plan for my daughters room. It is 18" shorter (54") so I eliminated the diagonal braces at the back of the plan. It still is very sturdy. I made the top from rough sawn oak board that I had in the yard by handplanning the top and edges. You could just buy 1x12 oak if you wanted to, although it would be pricey. If you are in Connecticut let me know I have a few thousand feet of it! My daughter loves the desk!

This week was a collaboration between me and Brad at FixthisBuildthat.com. I made a slight variation of his hanging tool cabinet to store my nail guns. More details at my website: http://www.lanebroswoodshop.com/2015/03/nail-gun-cabinet.html

YouTube video: https://www.youtube.com/watch?v=BUHnkjojlWc

The bed in grey, also made the backboard taller (and doubled support on back) because the bed will have a box spring (photo 2).  Awesome plans, love the look already.  Excuse the background mess.  The back wall is part of the same project! Thanks again for the plans!!

Note to future builders, learn from my one fatal mistake, be really picky on your quality of wood.  I had some slight frame issues because on a bad board that resulted in about a 1/4 inch bow on one side.  My slats are all use rival but you can see some done touch both sides...that is the bow.  Still no one will likely notice but me.

Second, there was no info on spacing along the frame for attaching the 2x4 to the 2x6.  I used 12", maybe overkill.

We were using a 1970's dresser set which was constructed of mdf wood with a laminate teak exterior .  I decided to do a makeover that would match our bed.  Instead of simply painting, I decided to use solid wood (pine) and get rid of the poor laminate drawer fronts.

More photos and tips on my blog about this project:

http://www.woodworkingfourdummies.com/blog/dresser-set-makeover

Cheers,

Ian

Recently built this table my first build actually. I told my wife we needed a new table because we didn't have enough room for our youngest to move up to the table she said let's build one. Well I did the "building" and she did the staining painting and sanding. She is currently putting new fabric on our old chairs. And now she has me building a bed. Her words when I finished "I didn't know you could build stuff". My reply "that was part of the plan lol". Thanks for all the designs.