Community Brag Posts

This is another one of those, honey I like this projects. My wife was doing her normal primitive furniture web surfing and came across this end table. It's really not to hard to build. All you need is 8ft of 1x10, 5ft of 1x12, 16ft of 1x3, and some spare 1x2 and 1x4. A few simple cuts and then you have a perfect little primitive side table.

My son and I had a blast building this table last October. I have been meaning to write and thank you for the great plans. We took the suggestion of staggering the legs for better access and it turned out great. I also used deck boards for the top to help reduce weight and they were already slightly curved on the sides which made sanding easier. Thank you!
My cost includes a nice Kreg Jig set up (approx $100)

Love this tv table! It was my husband's first project from Ana's plans, and it turned out really well. The most difficult part was deciding how to make the sliding barn door hardware, since paying $70 for hardware when the wood cost about that much seemed crazy. My husband built it and I stained it, Sunbleached by Varathane. A nice blue-grey.

Designed and built vanity, mirrors, plumbed, tiled, and wired and installed lights.

We had a big ugly frameless mirror in one of restrooms that builder had fitted as standard. Took it down and made this framed mirror instead.

Made from 4 by 1 with routed recess for mirror. Edges are 3 by 1s

Finished in Rustoleum Driftwood and two coats of Minwax Satin WIpe On Poly.

It is quite heavy so I fitted it to the wall with a French cleat made from two scraps of wood which also means it fits flush to the wall.

This rustic farm bed is handcrafted from reclaimed weathered barn wood. The plank design and mixture of tones and textures give it a distinct rustic feel. Each piece celebrates the unadorned beauty of salvaged wood. Our reclaimed barn farmhouse bed is truly transitional. And now the best part, it can be made in any size needed -- King, Queen, Full or Twin.

Farmhouse Hall Tree by Leila Adams

visit us at www.madeatthisplace.blogspot.com, for details. We built a large platform off the ground and just put a house on top. Then gradually extended the design.

I used a combo of a couple of Ana White's sofa table plans and I changed them so that two tables would fit together at the angle of my sectional couch. I used pennies on the top and covered in epoxy resin.

Great afternoon project. This was my first build!  

First project from Ana White plans. Thanks Ana, looks great in my coffee bar.

A twin version of "Mom's Fancy Farmhouse Bed" that includes a matching footboard. Kreg jig used all around. The bed takes about 6-7 hours to cut everything and put it together. Staining takes quite a bit more because of the dry times needed.

Simple, easy to build and oh-so functional. Loved these plans because of the ease of building and the budget friendly supply list.

The frame for the bunk beds were completed over the course of a weekend and the next week was spent sanding and painting.

The plan allows you to build a strong, sturdy bed that can be easily disassembled/reassembled as necessary. It worked great being able to carry the 4 separate panels into my daughter's small room and then screw everything together. I also liked that feature along with the ladder integrated into the bed.

An Important Tip (one Ana recommends all the time) - Be sure to read the comments section on the original plan. Lots of important information there, especially if you need to buy 8' boards instead of the 10' listed in the plan (like I had to) and a few of the missing cuts are noted in the comments.

You can read more about my build experience here... http://radcrafter.com/2014/03/adding-the-bunk-bed-bedroom-makeover-pt-2/

Built from this plan: Classic Bunk Beds: http://ana-white.com/2010/09/classic-bunk-beds-cleverly-designed.html

My wife wanted a Garden Shelf to replace the one that just gave up the ghost, so I browsed my favorite site for plans similar to what I was thinking.  Thats when I found the Rustic X Book Case.  Perfect.

I need to stuff larger objects then books in there, so I changed it to 3 shelves and I put those on top of the cross members.  That was easier and it gives it that work bench look.

For the X's, I had the wood to risk so I tried recessing them.  I dry fitted (chop saw highly recommended) and marked them and when I flipped them over, they aligned perfectly.  With a circular saw set to just slightly less then 1/2 depth, and some very careful cutting, they fit together quite well.

Sturdy with a bit of class.  I'm pleased.  Thanks.