Community Brag Posts

I built this loft bed for my daughter who is 3. It is built like the loft bed but the height of the fort bed since she is still little. The first night we were worried that she would somehow roll out since the mattress is thicker than I had realized making the side rails shorter, however she has not had any problems. I used 1x2s and a few 1x3s since that is what I had in the shop. If I were to do it again I would use more 1x3s for support or add plywood like the Fort bed.

This was my first table - I added extensions by notching out the end 2x4's and making extensions that slide into the pockets. There were a few mistakes I made that will be corrected when I build my next.
I modified the length of the table down to 5 feet long, but with the extensions in it goes up to 8'. The table is also 34" tall due to a giant husband and Great Dane. The chairs were likewise modified in height and I made the backs a bit fancier using 1x2's and a nail gun.

Dark walnut finish

I made something quite similar to the plan you suggested.
I onlychanged the top of the table diagonally.
Thank you very much Ana

I've loved doing some custom signs lately. Since I didn't have anymore reclaimed plywood I let my boyfriend Kreg Jig do the work joining some boards together, and let me angle grinder do all the damage.

I made this sawhorse desk for my 11 year old daughter's room makeover. It's a nice, simple plan that was fast to cut and assemble. I would trim the top of the saw horse legs to be under 24 inches to make sure it completely fits under the desk top. I may add a backsplash type backing.

My friend and I built this out of white pine, using plans from here. We threw our own changes and special touches on it and used the fridge plans to build a pantry also. We painted it yellow, and used vintage inspired and cupcake fabric prints. I also found a miniature ice cream parlor set on Craigslist. I painted to table top and we upholstered the seats with the same cupcake fabric. A few kitchen accessory kits and VIOLA! My girls LOVE this and it cost under $200 to build. I would recommend building over buying ANYTIME you can! Thank you Ana White and my friend for making my girls' Christmas the best yet!

My Sister thought this table would be a perfect edition to her new Farm House styled home that she was building. My sister asked a local wood turner if he had any old chunky legs sitting around...and he did! He sold these beauties to her for $20/each, steal of a deal.
We followed the Husky Farmhouse Table plan except with a few modifications. We used 5x 2″x8″x72″ pine boards instead of the 2″x6″ boards. I thought it was necessary to add some supports to stiffen up the table top, so we cut 3 pieces of 2″x4″ about 25″ long and glued and screwed those boards into the underside of the table top.
Next we substituted 1″x4″ furring strip board for the 2″x4″ skirt and eliminated the 1″x2″ trim and put a cute routed bead around the skirt. Since the table legs are round at the top instead of square, we changed the skirt attachment and screwed the legs to the table top. We cut the skirt boards to fit and screwed them in place.
The table turned out gorgeous, my sister adorned this table with fun ombre chairs. Thanks Ana for the plan.

FYI: tutorial for the silver travertine herringbone floors on blog:-)

Outdoor sectional.  Modified the sectional piece to be 48" rather than 72" as in plans.

See Saw based in brag posts i saw here in Ana White website
Simple project

For my daughter's birthday I made her this table and chairs. Despite being very easy and cheap to make, they are very sturdy. I've sat at that table quite a few times with no issues at all. I love how they turned out.

Hubby followed the plans exactly, using cheap whiteboard from Lowe's. I stained using Minwax dark walnut and a water-based Minwax poly with a matte finish. I would only use this kind of wood again if I were painting the project. It is hard to stain and my options were limited, because the wood doesn't take stain well. Love how "pottery barn" it ended up coming out, though!

This was my second project when I took up woodworking. It's the pocket hole version and I couldn't be happier with the results!

My wife went shopping one day in a primitive furniture shop and found this saltbox house that she loved. So I decided to get a picture of this house and build it myself. This project was a lot easier than I thought it would be. Hope you enjoy.

This table was my 4th build from the site and took my wife and I about 10 hours to build.

I made my console a little shorter (71 in). I used reclaimed wood for the exterior and sanded/stained wood for the shelving and doors. I used screw eyes and galvanized pipe for the sliding door hardware. A lot of fun!