I needed a place for my kids to put their shoes so I shrunk the plan for the X Console and made it fit my entry way. I love it!
After watching Ana's video I decided to try to build the Christmas tree shelf this year in time for the season. It worked out alright. The build is straight forward. Doesn't take long and it's a fun seasonal project. Now I just have to figure out what to put on it.
My husband just finished the Elementary Trestle Table from Ana's plans. I painted the base white and he polyurethane'd the pine project panel for the top. He also used "Super Glaze" on the surface for a thick shiny protective coating. I made the Storage chairs from Ana's plans last year, they were my first real project. I also made Grace's Bookshelves a while back, you can see them a little in the background, one is pink and one is blue. We love Ana's plans and are always printing and planning what we're going to build next.
Wed, 02/07/2024 - 06:16
Love the shine on the table.
Do you have the plans for the table? I made this table and the chairs in 2020, but now can't find the designs for the table. Thank you for any assistance.
This was my very first project. People ask me how much it cost me to make it, and I don't know that you can quantify the satisfaction of making our own furniture. The whole family helped in making this table. We elected for the Rust-o-leum Kona stain and then a semi-gloss poly. i think my next project will be a kitchen table, some built-ins as well as taking my son's favorite college team logo to embed onto a chair. Thank you for making the available and easy to follow.
I worked on this in the evenings after work so it took more than a day or two to complete. Plus sanding, staining and finishing if done right took over the course of a couple of nights.
I finally finished the bedroom set, this one the last piece (and the biggest dresser).
More info on this 1970's bedroom set here:
http://www.woodworkingfourdummies.com/blog/dresser-set-makeover
Cheers,
Ian
Tue, 05/26/2015 - 08:44
Checked out your blog. I really liked it, but I couldn't find a way to follow though. Nice job on the makeover too!
Wed, 06/03/2015 - 05:30
Glad you liked my blog!
In the top right, there are black buttons for Facebook, Pinterest and twitter where you can follow me.
thanks,
Ian
I saw your video and it was perfect for a small room. You made it look easy but it was hard work but worth it in the end.
This was a fun, easy project...and perfect solution for the book clutter. I got some good practice rounding off corners (invested in a belt sander) and cutting out the handles. I beleive the baskets my wife bought for the bottom shelf cost double the entire project.
This is by far the best site I have ever found for wood projects.
i built this for my mother when she decided she wanted a new table .i used the plans that i had found on this site Thank you for such an easy plan made my mothers day
I've loved this little tree shelf since it was first published, but thought the angle cuts might be too difficult. I was wrong. It was simple and fun, with an extra pair of hands. Made a few minor changes. Merry Christmas & thanks for the cute plan!
This is a picnic table my husband made for my niece's doll from scrap wood we had left over from the drawer pull project. he said "enough room so that she can have a doll party" I'm waiting to see her at Easter to piant it with her!
These garden beds are fantastic! They were so easy to build and look great in our backyard. We have always found ourselves with a garden covered in weeds or plants out of control. Our garden this year looks wonderful and we have hardly any weeds in the beds. Thanks for the great plans!
Fri, 05/24/2019 - 10:05
I'm so glad the plans worked for you! Your garden looks fantastic!
I built this using the Kentwood bookshelf plans as a guide. I made my shelves 3 ft wide and made it aprox. 8 ft tall. I also bought the KREG shelf pin jig and built the shelves to be adjustable. I haven't chosen a finish yet because I am waiting for my son to pick a color since it is going in his room. I am considering fixing a shelf in place and building some doors for the bottom. I worked on this over a week span, however I could only do bits and pieces at a time. The sanding took longer than the build because I plugged the pocket holes and they take longer to sand down.
When supply issues made buying lumber for my dream shelves nonsensical, I turned to Ana's Shelfhelp and Voila!! I built the base on my own and added my own moulding, but without Ana's sites, I would not have made this dream come true. THANK YOU!
Sun, 12/26/2021 - 13:26
Those look great, thank you for sharing and for trusting us with your dream bookshelves!
Love this bench! Its now finished in a Martha Stewart paint called leafy green and resides in my large bathroom housing excess towels.
I did change this up a little and used 1x2's for the top and bottom of the backing. I drilled my screws in from the top and it went together easily. Then I just filled in all my holes.
one suggestion would be to make a paper template 2 1/4" for the spacing between the rails. Saves lots of time.
This project took me about 3 hours the first time and about 2 hours for each one after.
This bed is so perfect for my studio apartment. I don't have the floor space for multiple dressers, and the modular 3 bench design made it super easy to move in (and hopefully to move back out when school is over). LOVE LOVE LOVE this project.
I also made the headboard.
It is a single sheet of plywood, cut down and covered with polyfill and fabric. We predirlled holes for the buttons, and I set the headboard (fabric side up) across 2 saw horses with a flashlight underneath so I could see the drilled holes. I used nylon thread and a large needle to attach the buttons. There are flat buttons on the backsides of the holes so the thread doesn't slide through. It is hung directly on the wall behind the bed via wire hooks - make sure you hang it from the studs!
Needed a place to store wood for the fireplace and firepit. This very nicely organizes what was before a huge dirty pile of wood scattered on the ground. Cedar pickets for the top, all is coated in exterior white stain. Holding up nicely so far.
Love the desk! A few issues I had though are that the top panel will not go into the space of the top angle pieces are in place. I had to remove them to get it in. Additionally, the pocket holes seemed insufficient for the top 2x2s because of the angle they are at, so I went back and drilled countersink holes directly into the adjacent support board and added wool glue. Lastly, for then 2x2s that are supporting the bottom panel, I was worried about just having the pocket holes there as well because I could see my 5 year old climbing on it to reach the pegboard so I added L brackets to the bottom of the 2x2s under the bottom panel. I also added a light to the underside of the top panel and supports at the bottom near the floor. Turned out great
Made from red oak. I made it 65" tall so the full pattern was visible above the mattress.
I'm very happy the way it turned out and would like to thank you for the inspiration 🤗
This table is based on the Flip Top Storage Bench / Coffee Table. While the original design size was almost perfect for my needs, my intended use was as a base for a flat panel TV. For this use, the flip-top made no sense so a modest design change was required.
To add some strength to support the TV, and still get some utility out of the top shelf for remotes, magazines and what-not, I left off the front trim and pocket screwed a couple risers to the top shelf and back trim and attached the top to these as well as the legs.
I had big-time warpage issues with 1 X 12 pine boards, So I settled on a 'speed' approach using a 18 X 72 laminated pine board, which I cut to 52 inches length. These dimensions eliminated the need for second top board used for the hinge mount in the original design. I immediately took it home, cut and mounted it on the table carcass and locked it in position with screws before it had a chance to move on us. My wife then quickly painted it.
I have a sketchup model of the revised non flipping bench. If anyone is interested in that let me know.
I followed Anna's plans pretty closely though deviated somewhat as well. Added additional length and one more seat separators & seat, increased depth by a few inches, changed design of seperators to allow for arm rests, added some additional trim, a second inset shelf w/in the shoe box area (for sandals and whatnot), and then inset wainscoting.
