Community Brag Posts

Didn't turn out identical to the plan. I changed some measurements to work with her porch and the space I had to hang it, but all in all I'm more then pleased with it! ;-)

This is my attempt at the 2x4 outdoor sofa.  The entire sofa is made out of 2x4 Redwood, so the cost was a little high at $150 for the wood.  I'm still waiting on cushions, but I went overboard and bought them custom made so the total for those came out to $520.  Overall, I could have easily bought a complete set online but hey, this is more fun!

My one concern is the back support.  I'm thinking of building something angled in, but haven't thought of the best approach yet, that will still look good.  

We live in an old house with lots of windows in the kitchen but not much storage space. Having previously tackled a kitchen island with the help of ana-white.com, I knew that the Under Sink Kitchen Organizer Shelf would be a much simpler project. We already had the tools and screws, so I picked up a couple of 3-foot 1x8s for about $7. The organizer is 20 inches high, 15 inches wide, and 7-1/4 inches deep. The shelf is only about 6-1/2 inches deep because I used 1x8 for the back, but it works.

These plans came at just the right time for us as we needed to move our toddler to her first twin bed! I was set on beadboard for her room, so I modified the plan slightly by gluing the sheet of beadboard to the plywood, adding the molding to frame the beadboard and also adding a couple of inches to the legs. The thickness of the beadboard did not allow the back of the headboard to be flush with the legs, but it really isn't noticeable.

This bed is easy to build and extremely sturdy! We spent much more than the $75 listed on the plans, using both pine and poplar as we shopped around checking out our local retailers. Our local furniture store's least expensive solid wood bed was much scrawnier and $250 plus delivery, so we still came out ahead! The mattress is a 14" memory foam mattress bringing it much closer to an average bed height, but still very accessible for our 2 year old.

The bed only took a couple of evenings to build and the headboard came together in just an afternoon! However, most of that with a 2 year old, so it could come together quicker if you are sans kiddos :)

I built the table some months ago and my wife loved it so we decided to build a set of benches to go with it. I gotta say though i will never build these suckers again. Man there were so many cuts!!! The stain was steel wool, vinegar and tea bags and i used a rub on polly. The funny thing is I built both of these benches for a total of 30 bucks! I found all the wood laying around. I hope you all enjoy. Sorry about the horrible pictures I guess if I am going to be uploading pictures on here a better camera other than my smartphone is in order.

Loved a shoe cabinet at Mobler Furniture, but hated the 300 dollar price.

Figured Ana would have a plan: She Did. We used the Shoe Dresser plans but I built the gables in one piece to eliminate the need for separate feet. The overall length is only 38 inches. I built it counter height.

Because we used wood that we had laying around from previous projects, the drawers, and the unit are made of pine, while the top is made of oak. Total cost for the wood was 30 canadian dollars.

Rather than buy catches, I ran an extra support rail under the top, which made attaching the top easy, but also served as a "bump" for the closing door - it adds a satisfying clunk when closing the doors. I did the same for the second door too.

The handles were purchased for a project in our previous house and used here instead.

We used paintbrushable Tremclad matte black for the interior (23 bucks - used less than half the tin.)

We used 1.5 cans of spray Tremclad red enamel for the exterior (8 bucks a tin)

We hit it all with two coats of Zinsser sealer first  - 14 bucks, used half. 

Total hit was well under a hundred bucks.

Took me a couple days to work out the details, a day to construct, and about three days to paint, one for the undercoat, one for the black, one for the red.

My plants are still really little here and I modified the planters to sit right at the bottom of my windows and fit a 12" pot exactly. Love them!

I modified the work bench console to make a standing desk.  I have a lot of textbooks so I made the desk 63 inches by 29 inches, using 1×6s instead of 2×4s.  I also added a drawer to the front, and eventually I'll finish a back lift up compartment for storage of firearms.  Since the desk is bigger I added a cross board in the legs for extra stability.  I also made the shelf a lot higher to store textbooks I wasn't using in the moment.  The way it's built I could use it as a console or bar table in the future.  The stain is miniwax dark walnut with a polyethlyene sealant.  Hope you like it!

The website keeps rotating the pictures, sorry. 

Great nightstand/chest made form the Kentwood Nightstand plans on Ana-white.com. Thanks for the great instructions! I would have to add that I needed 5 1x3's to make the top, instead of the noted 4 in the plans.

Thanks again!

Not as easy as everyone else said online. I had never used a kreg jig and it takes a bit more practice than I had patience for. one thing to note is the instructions screw lengths are for if you are NOT using a kreg. If you use a kreg, use the screw lengths they suggest. I used a deck stain and purchased the cushions on sale at Ikea ($22.50 per cushion)

Thank you very much for this marvelous plan and idea. I built one for each family of grandchildren and love the finger-saving torsion hinges and front lid relief. I did end up trying biscuit joints (except for where the 1x2 boards join to the legs) as it left the inside of the box looking cleaner, especially if stained instead of painted.

After years of pining (HA made of pine) for a farm style plank table, my husband and I worked together to build one. Thank goodness for Ana White. The plans were easy to follow, and with the help of a friend it didn't take long to build at all. This is the first time we have built anything. We have also altered the plans a bit, and my husband built a smaller one for a friend.

I used the Julia Nightstand plans but added textured wallpaper to the side panels and also decoupaged scrapbook paper on the inside of the drawer. The back was wainscoting which was painted the same color as the nightstand (this was a chalk paint). I added a thin support piece of wood above each side of the drawer to prevent it from flipping downward while it was open

Matching beds