Community Brag Posts

This was the first bed I built from Ana's plans... Actually it was the first thing i have built since 7th grade shop class in 97' (ew) .. It was fairly easy, but I still had my up and downs! I actually held back tears a few times and almost gave up... BUT I didn't, or you wouldn't be reading this ;) No, I pulled up my big girl pants and I finished this bad boy up, and am now laying on it while writing my brag post, holla!! Anyway, after doing it once, I think it would be super easy to build another, if I decided to. It was all worth it though, this bed is absolutely stunning and everything I dreamed it would be. In short, if you're thinking about building this, do it! It took me almost a year to work up the courage, and that's just dumb :)

Building:
I pretty much followed the directions to a 'T', but I did use 3 an 4.5 inch LAG SCREWS and did not have a nailer so I used an old school hammer. Advice: if your lumber yard, or hardware store will cut your wood for you- LET THEM! Even though I did it myself an it was easy, it would have saved me soo much time if I let them do it right there at the store (sigh). If you have any questions feel free to ask me and I'll help as much as possible!

P.S. this thing is a mammoth, so be prepared for that.

Benchmark Table, built out of pine and stained with dark walnut and a flat finish!

Thanks for the plans! My wife loves the table that I built for her using them. Only change I made was that I used my Kreg Jig to screw all the table top boards together. I'll be building the bench next.

This is my first woodworking project. The plans worked out great! However I did make some minor changes. I made the two by four under the two by six top an inch longer on each end. I also did not brad nail the 1x4 trim pieces. I used wooden dowels and wood glue. Also I bought bed rail brackets and mounted the side rails flush to the outside of the head and footboard. This piece was conditioned with Charles Neil's Prestain conditioner and stained with minwax English chestnut. Topcoat is minwax semigloss fast drying poly and rubbed out with minwax paste wax. Can't wait to get to sleep in it tonight!!

This was my first build and I throughly enjoyed it! This bed is for my three old son and it meant so much to me that I was able to build his very first big boy bed. Thanks Ana for the plans and for making then so easy to follow.

Tried top shelf side detail per the plans but did not like the way it turned out so I added the "castle wall" details as shown on the two photos. Wall details made with stacked dato blade on my table saw.

Built this for our side patio and we LOVE it. Decided to stain it in black and mahogany. I made mine longer. It measures almost 11’. Make side benches and end benches too.

I took Ana's plans for the Easiest Industrial Cart and modified them into a coffee table. I shortened the pieces of angle aluminum to 10", omitted the middle shelf, and added some 7", DIY casters, made from pulley wheels. Since I used 3/4" thick project panels, instead of 2 x 12, I was only able to drill lag screws through one side of each corner of the wood. To add stability, I added small, L-brackets, screwed to the wood and bolted to the aluminum. I included a photo so you can see the modification closely.

Here is a Triple Pedestal table with benches and two end stools to match everything else.

We made some significant changes to the shelves/cupboards. Since we were on a bit of a time constraint with the impending arrival of our little bundle of joy, we decided to nix the drawers all together and instead make three open face shelves. This made the larger cupboard and door face area a little shorter than in Ana's plans. We made most of these changes on the fly while sitting in the garage..

We have a big move coming up and probably won't put the hutch, center base, and side bases together until after the move. We'll post pictures of everything put together once we get settled.

Oh, and for some reason I've been calling this the Madison Changing Table. . When it is actually called the Madeline Changing Table.. whoops!

We wrote up general directions with pictures here: http://thehuth.blogspot.com/2012/11/madison-changing-table-part-3-cente…

I used your "cedar planters for less than $20" plan and modified it to create two beautiful planters for my house. I framed out the top of the planter to give it a more complete look. Also, I added a "C" for our last name. -Shaye 

Sliding door console built by Kathryn and Scott Winkler of K & S Coastal Home Furnishings. Kathryn added her own unique chippy finish to set this piece off! Visit our other builds at fb.me/kscoastal

My husband and I used our Thanksgiving break to build this playhouse and deck, using Ana's plans. We are NOT builders...this is very doable for beginners with the right tools. Read the plans thoroughly before starting. Total cost (including all lumber, hardware, and paint) was under $600.

We still have door and house trim to complete, a little painting, and a handrail/ladder.

Santa may bring a slide and some other fun accessories!

Thanks Ana!!!!!

I built this table following Ana's plans!  It turned out great!