Community Brag Posts

We just finished our complete kitchen remodel, from tearing down walls to new cabinets, appliances, hardwood floors, and countertops. I assembled the cabinets and installed them myself, along with tiling the backsplash and nailing down the floors. So I though I'd try my hand at furniture building. It was my first time building anything like this and I thought it turned out pretty nice!

I used left over boards from the removation for the bases of the table and benches and 2x6 poplar boards for the tops. I made some adjustments in the size since we're only a family on 3. Since I made the table shorter, I changed the 45 degree cuts on the cross braces to 30 degrees so they would fit. 

The bookshelf, of which I made last year, was made from crates. I used Ana's Clubhouse Bed idea as the basis for mine but I deviated from it quite a bit. Instead of a front entrance I made a side entrance and added two windows. Additionally I attached it to the wall instead of making it two sided.

My first project. Hope to make more!

I made this table and chairs for when the grandchildren come over. The chair design was from a larger chair I had made and just downsized them

This the recent remodel of our guest bedroom. Its a modified plan from a fancy farmhouse bed that allows room for tubs to be stored underneath, three of the ledges, and the nightstands are old wooden crates that have been sanded down, painted, and mounted to the wall. We decided to do vinyl stickers as the "headboard" and felt the birds on a wire made for a good look. The lamps we made from wine bottles with labels we liked using westinghouse lamp kits. Thank you Ana White for these plans and ideas!

This is a half-width version of the Rustic X Console table on Ana-White.com. The oxidized finish came out purple and needed some sanding. If I build another like it, I would highly suggest sanding the X pieces before assembly. It went together very well and was my first Kreg Jig experience. 

Using the plans from this website for the 2x4 tables and 2x4 loveseat, we modified the sizes to fit the couches that we bought at Target.  Used cedar wood and painted black when we were done to match out deck.  Less than $300 in cedar wood.

Took no time at all - 1 hour start to finish on a rainy day. Built it for the little kids but kids came out of the "woodwork" from all over the neighbourhood. Easy, fun and cheap! May add some old rubber bike tires beneath the seats to protect the wood that comes in contact with the ground. Didn't bother with a padded seat - an off-cut of plywood, with sanded edges works just fine and will be easy to replace if it starts to weather.

The IKEA Lack Inspired Bookcase plans became my inspiration for the entire entertainment center.  I made a few changes to the bookcase plans.  I increased the height of the bookcases to 84 inches and added adjustable shelves.  I also included some major extras including a console for the TV, a bridge to connect the bookcases, and doors inspired by www.shanty-2-chic.com.

I made this for extra storage in the small Sunday school classroom for games and craft supplies for the kids.

I used a pallet I found in a burn pile, cut it down, added a bottom piece from one of the other cross pieces, painted, stenciled, and covered it with a coat of poly. I then added potting soil and herbs, and screwed it into the studs of our porch. It's off the ground so my dogs can't get into it and my chickens won't sample the plants!

This project was much easier than I originally anticipated. Even cutting the legs at angles and sanding them down to appear curved was easier than I expected.  I also used early american stain by Minwax. I used only one coat though and in hindsight might have done two to make it a bit darker. I used Minwax clear paste wax (two coats) to achieve a low sheen and protective layer. I was able to find a toilet paper holder similar to the one Ana used at one of my local big box stores. I wasn't able to find anything else I liked better.