Community Brag Posts

had lots of fun building this project for my grandauther, she's only a year and a half old and I'm pretty sure she will enjoy this see saw for a long time.

Hi Ana

I would like to share my experience making this Outdoor sofa (see attached link). http://ana-white.com/2014/07/plans/outdoor-sofa-2x4s-ryobi-nation

The sofa is supposed to be made using 2x4 boards, but these are not a standard size in Australia so I substituted with 90 x 45mm pine boards. No other changes to measurements were necessary. I followed Ana's instructions and definitely recommend using wide clamps to hold the base when screwing together. I only had short clamps so was rather difficult keeping everything firmly in place when drilling the screws in.

Next step was preparation for staining. I used Cabot's pine filler to fill major holes, knots etc, then sanded lightly paying extra attention to the arms.
I stained using Cabot Exterior Varnish Stain (teak colour). This turned out a beautiful warm colour that I just love.

Finally the cushions....
For the base I purchased a 5inch thick foam single mattress (on sale $61 so worked out to be really cheap foam).  I measured to fit base and cut using an electric knife - worked a treat! I had enough left over to do a cushion along the back plus two small side cushions to go along the arms.

Next step was covering the base and side cushions. I purchased some outdoor Decorating fabric from spotlight  as sofa will be exposed to some QLD weather. For the base, I used a similar process to the Censational Girl box cushion cover using Velcro instead of zips.
http://www.centsationalgirl.com/2012/10/simple-sew-box-cushion-cover/
For the side and back cushion I made up 3 sides of the cover, then inserted foam and sewed the last end closed (cheating I know but just too awkward to do proper box ends).

Lastly, the throw cushions.....these were really easy I made envelope cushions from a single piece of fabric....once again no zips (hoorah!).  They only took 10minutes each to make and look great. See tutorial below.
http://thehappyhousie.com/simple-speedy-stuffed-sewing-tutorial-diy-envelope-pillows/

My first build so extremely happy with the result!

Thank you for the project idea! We used your Easiest Industrial Cart plans. Since this is our first project building anything ever; so please excuse any "mistakes" you may notice. We tried going with a blue stain instead of just brown, but we ended up giving the wood more character by staining over with my husband's "Warhammer Paints"...lol...

This was a very quick project. Only took 5.5 hours from start to finish, including dragging out and putting all the tools away afterwards!

I left the teeter-totter unfinished, not sure how it will make it through the winter. I may decide to paint it this summer.

I used a length of copper pipe for the bolt to ride through, along with some washers between all the pivot points. This should help keep the boards from wearing away over time.

This has been the BEST outdoor toy around! It gets used EVERY day in the nice weather.

Thanks Ana for the great plans!

I took Ana's standard dog kennel, turned it 90 degrees and placed the door where the side would be.  From there I built upward, including a book shelf section to use the space above the crate more effeciently.  I also increased the height of the crate to 32 inches to match the height of a standard crate.  The door was modified to use the large 3 inch pieces because the 2 inch was too flexible in my opinion.  This is the second one I have built, learning from the mistakes of the first one.  I added L brackets on the inside to make it so I could take it apart, and used the Kreig Jig so I can replace parts as they wear out or are gnawed on.

I adjusted the projection of the table by using just 2 2X6's and adjusting the shelves accordingly. Planning on making the coffee table very soon. I used tea then vinegar/steel wool to stain. The top is waxed to make dusting easier. I then screwed on 2 right angle mending brackets for looks.

This was our first furniture project together. It was not as simple as we thought it would be, but we are very pleased with how it came out. We are planning on making the sofa table to match next!

We created an art space for our boys to use (ages 3 and 5) but the table (2 IKEA Lack tables put together) was too low and small to do the job. I spotted this design and thought it looked like a straightforward build. It was! I don't have a Kreg Jig so still had to do everything the hard way, but it turned out okay. My plan with this one was I wanted to have it sturdy, but didn't want to paint it, and didn't want to worry too much about how great it is.

I used a cedar pre-cut plywood for the table top and had the lumber place cut everything for me. Unfortunately, their cuts were a bit uneven so I had to do some weird stuff to make everything go together. Since I opted for cheap pine for all the other pieces, the raw wood doesn't look as good as it could, but it will do the job. The nice thing about keeping it unfinished: whenever markers or crayons get on it, I can just sand it out! This is a great size for creating art. I'm just bummed my IKEA paper holder doesn't fit under the shelf. If I had thought about it in advance I would have made the bookshelf taller to accommodate.

Thanks Ana for helping me easily and affordably create a wonderful art table!

Rustic Sofa Table with black metal accents.

I made the taller version of this plan. 2x2's are my arch nemesis! Never again will I build something primarily using 2x2's because they are SO wonky! I tried to find the straightest boards possible but still it didn't make for a very good bookcase. I would recommend building this if you have a table saw & you can cut your own 2x2's! It will suffice for storage in my craft room, but I am not sure if it will hold up during all of our moves, because my husband is in the Army!

I have been working on this project intermittantly for months now. It is so amazing to have it finally finished and have it fit my style perfectly. Those shims took forever to apply. I stained them first and then attached them with wood glue to both the headboard and footbard. 

I made a few modifications to the aesthic though none of the cut lengths. Instead of using 4X4 posts I used 2x4's and attached them with metal brackets to give it a slight industrial feel. I also painted the framing black and the posts black and stained the top 1X6 and 1X12 siderails the same color as I stained the shims which I thought tied it all together and made it look warm and rustic. 

I did not build out the wood frame but instead used the metal frame I had already to set the bed down inside. I am really happy. Thank you Anna for this plan! I never would have thought I could pull something like this off!

What an awesome project.  

I built this table after seeing a similar one on your site. Mine is built with 2x2 legs, a shelf, and just one piece of 1x12 for the top. I was wanting something for in front of my window but this one is to small so I will eventually build a bigger one for in front of my window and move this one. Thanks for the inspiration!!

This project is the coolest.  The laundry room was a sad sack of disorganization, open cabinets (who took off the doors??) and no surface to work on.  The dog food sat in its' bag in between the washer and dryer.  Here's a video of the makeover: https://www.youtube.com/watch?v=xIi2Ay2vXEE

Used Ana's tut on making raised panel doors, and purchased tiny trim moulding to fancy it up.  I also routered the edges to give detail.  I LOVE these doors!  I created the dog food pull out bin to match it all so the food is concealed.  In hindsight, I should've sprung for better bigger wheels because we have 50 lbs of food in there and it's a little difficult to pull out when filled all the way.  It's just a cardboard box lined with a trash bag and painted white on the outside. 

Table top was made from plywood and scraps.  It's more useful than I thought.  Very nice to have a solid surface to put stuff on.  Routered the edge of the plywood for a more finished look, though I'm not sure that's wise with plywood. I love that the cabinets are now closed and I painted the room so it looked more fiished.  Yay for $75 room makeovers!

My wonderful husband and father built this dry bar for me using the Rustice X TV console plans.  They modified plans to so it is 42" tall, 6-1/2' long, and shelving is wider and centered.  I love it.  Thank you for sharing your plans.

Built these for Christmas presents for the family. Used the 5 1/2 in wide pickets for the big ones. Used the 3 in wide pickets for the small ones, and cut everything else to scale. I don't have a kregg jig so I just screwed them in from the sides. Doesn't look quite as nice, but is plenty sturdy. I also added the mitered top like many others have.

The dark ones are Java Bean stain, the one is raw (obviously), and the other is Red Mahogany stain.