Community Brag Posts

Here is a desk I recently built.  It is a Pottery Barn piece.  It features full extension drawers slides and simulated maple melamine drawer interiors. 

A friend of mine loves the tables by Harp Design Co. but she wanted changes made to it such as the apron being inset, removable legs, oak wood, specific finish, etc.

She hired me to make her one and it's been an exciting build!  I built it from a pile of raw wood, turned the legs, etc.

My favorite thing to do is to inpsire others to reach beyond what they're comfortable doing - that's why I post about my projects through my website so other people will feel like they can do it too!  https://theprojectlady.com/how-to-build-a-harp-design-table/

I'd rate the level of build as intermediate, but really anyone can make it easier or harder.  The most challenging part is the legs - do something more simple, hire someone to make you some, order them online, etc.  The posts I created for this table are in-depth but don't let that intimidate you!

Happy Building Friends!

SImple and easy to make. I had leftover wood so all I had to buy was 1x2"s. I'd say the total cost was $15. It's sturdy and holds a lot of books.

Loved building this :) think it came out great. Only thing is i wish i had the screws ana talks abt bc the boards split over and over :( what kind of screws do u use ana? Also couldnt find 2 3/4 deck screws, only 2 1/4"

This is my youtube video of me building the loft bed.

https://youtu.be/b5LpGZ87DG4

Instagram:  @gardners_garage

Thanks Ana for your plans.  I used them but made just minor adjustments to the height to suit my daughter.

Having your website defenitly made things easier, from picking up the wood to the cuts!

Thanks!
 

My husband and I took the Narrow Farmhouse Table and modified it for a school table for our children. We used two old doors we had left over from remodeling our 1925 craftsman home. One door is the top, and the rest is lumber culled from the other door. A fun, free, one-day project.

These were the inspiration pieces for the 1-Board cedar desk accessory set plan. These were made entirely of scrap wood. These sets are all painted, they will be gifts for the girls at work.

The wood for these is some 3/8" plywood (crate and pencil cup sides), 1x2 (bottom of business card holder and ends of pencil cup), some 1/2" x 1 1/2" craft board (sides of paper clip trays, business card holder), 3/4" plywood (bottoms of paper clip trays), some small squares of Wainscoat paneling (sides of gray pencil cup), some 1/4" plywood (bottom of pencil cup), some 1" strips of some old painted lauan (old project, pulled apart and the wood is being repurposed) and a couple of little pieces of 1/2" x 3/4" S4S (fronts of business card holders).

You can see the mishmash of different materials in the shot of an unfinished set, and also the stack of them waiting in the wings on my work table (it's starting to look like a Jackson Pollock painting :) heehee)

All the paints and materials were left overs from other projects. I hadn't decided on the finishes yet while I was building. These would be even easier to make if I had finished all the pieces first!

It was fun building these, it's great to be able to take something that may have gone in the bin, and make it into something lovely. I'm hoping the girls like these!

I've got a cube drawer plan in the works (a 1-board cedar with 2 drawers, and also have measurements for a 3-drawer from 3/8" thick craft board and 1/4" plywood, like the one on the table). I'll get to those soon.

Thank you for the plans. This turned out great for our room.

Entryway console without base pieces to more closely match my other furniture.

I already made the stack-able chairs for my daughter, but she was using an end table for an art table and her chairs would not fit under it. I took the old legs and frame off of the table and built the clara table frame. I kept the original table top. I then spray painted the legs black and for the top I used chalkboard spray paint which I found at Michaels. She now has a fun table that can be used for art projects and she can draw right on it. The before photo below shows the original table. I took the spindle legs, painted them different colors, and I will be using them for a bench to go with a new dining table I am building.

After living in the basement with our young children for the first few years after moving into our new home, we were ready to claim the master bedroom on the main level. We made it a winter project and re-did the whole room (good-bye lavender walls). We made the headboard from Ana's "Reclaimed Headboard" plans and one of the night stands from the "Kentwood Nightstand" plans! We love the final look and saved ourselves a TON of cash in the process.

Hi Anna, I really had fun making our version of your sliding mirror project! Thought you might enjoy the photos!  I made it into a jewelry cabinet.

My wife was interested in a coffee table that we could also use for playing games or company for meals, and naturally we found just the thing on Ana White's website.  I got some 2x2 pine from a lumberyard after not being happy with box store lumber.  The table top is made of pine glued together.  I decided to put the 2x4s underneath which gave some heft to the top so it does not wobble.  It fits tighter than I would want, so lesson learned for me I should have paid more attention there.  Since we wanted to paint the piece I went with the pine top.  If it were going to be displayed somewhere else in the house, or stained, I would have chosen a harder wood for the top.  The nice part of this plan, I could easily build another nicer top to go with the base if I wanted too.

This was our first build project! We spent the most amount of time picking the color than we did on the actual assembly. We extended the back 2 legs 36 inches to accommodate the window frame and shelf.

This Adirondack chair was done in pine. I followed Ana's plan, with only one modification ... went with a wider armrest. I thought the wider armrest would be handy for resting a drink.