Pallet chevrons
My wife wanted some chrevons (1 for all members of the fam). We are moving to a rustic feel so thought some pallet wood would do the trick. Left them rough (unsanded until very end). No real plans just figured it would as I went.
My wife wanted some chrevons (1 for all members of the fam). We are moving to a rustic feel so thought some pallet wood would do the trick. Left them rough (unsanded until very end). No real plans just figured it would as I went.
DIY Octagon Picnic Table
Make your own hanging coat / purse / bag rack with scrap woods and some inexpensive hooks. To see more details, please go to : http://mekhart.blogspot.com/2012/08/tutorial-hanging-purse-diaper-bag-r…
I followed the basic plans for the kent wood nightstand but made a few changes. I made paneling out of 3/4" plywood for the sides and door/drawer and routed a 1/2" by 1/2" channel into the face frames to slide the panels in. I added a drawer and made the door smaller. Instead of using the strips of wood for the top I framed it with 1x3's and inset a piece of Wedi tile underlayment. Wedi is a closed cell foam that is coated with a cement membrane. It is pretty durable and completely waterproof. I then used white thinset mortar and set 3x6 tumbled travertine in a herring bone pattern using a 3/16" v notch trowel. Grouted the top of the tile and caulked with color matching latex caulk where the tile meets the wood frame.
Built using the Farmhouse Bed - Queen plan, making adjustments for the Full size matress. The finish is a blue milkpaint over a white base and distressed with a sanding pad.
Thanks to the pandemic I needed to whip up a quick (and cheap!) home office. This desk was the perfect fit! I made the top out of an 8-foot rough pine board...Just cut it in half and attached it lengthwise with wood glue and pocket screws. Finished the top with a dark stain, and the bottom with some white trim paint we had laying around. The whole thing cost about $20, versus the $200 I would have had to spend. Very happy with how this turned out!
This is the 52 inch waterfall console. I fell in love the it and thought it might be a great way to store my bed pillows when they aren’t in use. I modified it to be shorter and taller, to fit my space and needs. This was my first time using a kreg jig and brad nailer… tutorials on those would be great, but I figured it out! And I’m so excited I did - this is a game changer for my building projects!
Ashlie Alaman
I followed the plan almost exactly, I just made it to fit the space that I had. It was super easy and I love the way it looks! And I used contact paper from target to decorate the drawer face and the shelf. I also made the shelf a pull-out shelf using the same type of drawer pulls as the drawer. i made that shelf the same width that I made the drawer and it fit perfectly!
The longest part of this project was drying time for stain and paint and such. I did not include that time in estimate for time to build.
I saw this table on Anna's website from rogueengineer.com. The plans were simple to follow. I made it out of pine, 2×4s, and baltic birch ply.
This was inspired by the easy kitchen island and the easy garage workbench plans. I saw what another person had done so I modified it to my specifications to work as a craft and fabric cutting table. It is 37" high so I can stand and cut fabric comfortably without bending over. I chose 37" because I have long legs and needed a little taller than normal countertop height.
The top is 48"x38" so my cutting mat fits both directions and a yard of fabric fits completely on top. The frame is slightly smaller 44"x34" to allow a 2" overlay on each side. The bottom shelf is 44"x31" and the middle half shelf is 44"x17". I ended up doing a half shelf because I used the leftover scraps from the 4x8 plywood. It works great because I will be able to pull up a chair and put my knees underneath.
The 2x4 legs are set out 1" from the ends. I attached the shelves and table top using L brackets. Due to bad math I ended up with a 1" overhang on the shelves along the 44" side.
The paint I used is Behr brand Spun Cotton in satin finish. It is an offwhite / cream color.
The stain I used is Minwax dark walnut and finsihed it with 4 coats of Minwax polycrylic.
I had an awesome guy at Home Depot do allt he cuts of wood for me.
Wed, 09/21/2016 - 15:00
I can hardly belive this is DIY! That birch plywood was worth it, it is lovely! Thanks so much for bragging, really enjoyed seeing your project! Ana
I made these for my granddaughter. I was using fours colors instead of three so used 1x6's instead of 1x8's on for the table top and just added one more back slat to each chair.
I am new to this. I used your plan but reduced the lenght by 24 to make a 2 seat Garden Bench. I used softwood and painted with this outdoor paint. Thanks for inspiration and plans. I am located in Victoria, British Columbia, Canada.
Ana read my mind! I was telling my husband that I wanted "L" shaped loft beds for our girls abouttwo weeks before she posted these plans! As soon as I saw them we went and got our lumber. So excited to have these done and the girls love them!
Thu, 09/13/2012 - 13:05
I saw another post where they did horizontal 2x4s instead of stairs. I see that you did one of each. Could you tell me what your thoughts are on how the kids like them....if the 2x4 steps are easy to get up and down on....
We are adopting and we're not sure what age children we will get....so, I want to make sure they are easy to navigate. Any thoughts???
Thank you!
Tue, 09/03/2013 - 09:30
we id the stairs for our 3 year old and the ladder for our 5 year old. She has no problem getting up and downthem but our 3 year old doesn't like to come down the ladder ones. The stairs are really nice and make the bed easily accesable even for me. =)
Wed, 02/04/2015 - 18:48
What are the overall dimensions with the two landing areas and stairs? I really like this idea, but the bedroom is not super big. Thanks!
This was my first ever project. The table that has a white base is another table I built after the stained one.
The project took several weeks because I only was able to work on it on Saturday mornings. I'm happy with how it turned out and learned a lot from it! I have a new love for woodworking and enjoy the whole process, from design, to completion.
Thanks for checkling it out!
Thanks for the awesome plans. Read a lot of feedback from people saying it was too small. Just make it bigger! Used same plans but 6 1/2 long and 4 inches wider. Added extra support to the table top and used all 2x4s. Lovin it
Sun, 09/25/2016 - 12:23
Love the bigger size, what an awesome project! Thanks for sharing it! ana
DIY Adirondack Chair
Our girls had made do with hand me down room furniture and decor( youngest 2, out of 5 girls). It was time to give them a space they love. I have never built anything other than slight upcycle projects. Slightly modifying this or that , never just starting with lumber and a plan. They picked the farmhouse beds and my husband was gone for 3 weeks backpacking, so off to buy lumber. Not as easy NO ONE HAS UNTREATED 4x4 posts!!!!! i called 3 counties, almost cried, to order was 3 weeks, or just cant get them. Finally found a cedar and cypress mill 1 hr away. Hopped in the car and off i went to load up.I had 2 beds to do so the second one went faster. What i learned?
1. even after predrilling you will do best hand screwing screws. Cypress was really hard in places and a stripped screw equals stress.( just like there is no crying in baseball, there is also no crying in carpentry)
2. the 2x4 that is under the 2x6 on headboard and footboard should be cut AFTER you assemble the 1x6 and 1x4 base. Much easier than making cuts with a circular saw on 1x6
3. your hands will feel like they were run over after day 1 of sanding, it will pass and get better.
4. perfect is not possible. It probably not even preferable. You want perfect? That is a machine
The room still needs some special touches, lamps, nicknacks, etc. cannot paint , rental. so sad. oh well
Fri, 08/31/2012 - 09:07
Thank you! I really enjoy woodworking, looking foward to more projects.
Fri, 08/31/2012 - 09:55
Your girls must be so happy to have these cute beds. And, proud of their mama who made them!
In reply to So darned cute! by sgilly
Fri, 08/31/2012 - 10:09
Really hard to find common ground for a 15 yr old and 12 1/2 yr old. Tried to go for sophisticated beach side cottage. Dark wood bookcase and side tables , jute rug, cotton quilt coverlets....also i did add six inches to the height for added storage. Lots of girls equal lots of shoes
My daughter and I made this for a Father's Day gift, along with a bike rack, to get my husband's bike "shop" in better order.
Changed up the plan a little, shortened the overall length, which changed the size of the door openings, but the biggest change was making four cabinet doors instead of two exposed sections and two sliding barn doors. Used Lowe's chalk paint products. Made this a dresser for our cabin in Maine.
Tue, 12/29/2020 - 19:01
I like it! Wondering what you used for the doors; did you use paneling or did you cut lines in 1/4" plywood to make it look like boards?
Inspired by the Queen Size Farmhouse Bed with Drawers, my father-in-law and I converted those plans into a King size. This was quite the project and took us a substantial amount of time to complete. We used a modified French Cleat to make the entire bed modular, so it can be easily (still very heavy) moved. The entire storage capacity is roughly 30 cubic feet, so we will have ample room to store our linens and other items not regularly used. This entire project was modeled from an antique door that my wife found in an antique store. Enjoy!
so i put this storage shed on the outside wall of my garage and then i put my dust collector inside it and cut a hole for the pipe to into the garage. It's nice and out of the way now. I adjusted the size a bit to make it fit more of my outside tools like the trimmer and blower. Its not in the picture but I also extended the roof about 30 inches over the side to park the lawn mower under it. If I were to do it again I'd make it even bigger.