Community Brag Posts

This was our first furniture project together. It was not as simple as we thought it would be, but we are very pleased with how it came out. We are planning on making the sofa table to match next!

We created an art space for our boys to use (ages 3 and 5) but the table (2 IKEA Lack tables put together) was too low and small to do the job. I spotted this design and thought it looked like a straightforward build. It was! I don't have a Kreg Jig so still had to do everything the hard way, but it turned out okay. My plan with this one was I wanted to have it sturdy, but didn't want to paint it, and didn't want to worry too much about how great it is.

I used a cedar pre-cut plywood for the table top and had the lumber place cut everything for me. Unfortunately, their cuts were a bit uneven so I had to do some weird stuff to make everything go together. Since I opted for cheap pine for all the other pieces, the raw wood doesn't look as good as it could, but it will do the job. The nice thing about keeping it unfinished: whenever markers or crayons get on it, I can just sand it out! This is a great size for creating art. I'm just bummed my IKEA paper holder doesn't fit under the shelf. If I had thought about it in advance I would have made the bookshelf taller to accommodate.

Thanks Ana for helping me easily and affordably create a wonderful art table!

Rustic Sofa Table with black metal accents.

I made the taller version of this plan. 2x2's are my arch nemesis! Never again will I build something primarily using 2x2's because they are SO wonky! I tried to find the straightest boards possible but still it didn't make for a very good bookcase. I would recommend building this if you have a table saw & you can cut your own 2x2's! It will suffice for storage in my craft room, but I am not sure if it will hold up during all of our moves, because my husband is in the Army!

I have been working on this project intermittantly for months now. It is so amazing to have it finally finished and have it fit my style perfectly. Those shims took forever to apply. I stained them first and then attached them with wood glue to both the headboard and footbard. 

I made a few modifications to the aesthic though none of the cut lengths. Instead of using 4X4 posts I used 2x4's and attached them with metal brackets to give it a slight industrial feel. I also painted the framing black and the posts black and stained the top 1X6 and 1X12 siderails the same color as I stained the shims which I thought tied it all together and made it look warm and rustic. 

I did not build out the wood frame but instead used the metal frame I had already to set the bed down inside. I am really happy. Thank you Anna for this plan! I never would have thought I could pull something like this off!

What an awesome project.  

I built this table after seeing a similar one on your site. Mine is built with 2x2 legs, a shelf, and just one piece of 1x12 for the top. I was wanting something for in front of my window but this one is to small so I will eventually build a bigger one for in front of my window and move this one. Thanks for the inspiration!!

This project is the coolest.  The laundry room was a sad sack of disorganization, open cabinets (who took off the doors??) and no surface to work on.  The dog food sat in its' bag in between the washer and dryer.  Here's a video of the makeover: https://www.youtube.com/watch?v=xIi2Ay2vXEE

Used Ana's tut on making raised panel doors, and purchased tiny trim moulding to fancy it up.  I also routered the edges to give detail.  I LOVE these doors!  I created the dog food pull out bin to match it all so the food is concealed.  In hindsight, I should've sprung for better bigger wheels because we have 50 lbs of food in there and it's a little difficult to pull out when filled all the way.  It's just a cardboard box lined with a trash bag and painted white on the outside. 

Table top was made from plywood and scraps.  It's more useful than I thought.  Very nice to have a solid surface to put stuff on.  Routered the edge of the plywood for a more finished look, though I'm not sure that's wise with plywood. I love that the cabinets are now closed and I painted the room so it looked more fiished.  Yay for $75 room makeovers!

My wonderful husband and father built this dry bar for me using the Rustice X TV console plans.  They modified plans to so it is 42" tall, 6-1/2' long, and shelving is wider and centered.  I love it.  Thank you for sharing your plans.

This is a wishing well I made for my sister for her wedding. It will be used during the wedding for people to drop "wish you well" cards into and afterward she can use it as a planter in her yard.
I followed ideas from multiple plans here on Ana-White.com, but I didn't follow any specific plan. Mostly I followed tips and instructions for cutting angles, drilling pocket holes and some finishing tips. This is the first "big" project I've done and I"m quite proud of it.

With everything, it measures 44.5 inches high. The well measures 21 inches across and 15 inches high. The roof measures 22.75 inches by 23.75 inches.

I hope y'all like it. I worked hard on this! :)

Thank you, Ana and everyone who contributes to this site. It's been so much fun and I've got lots of ideas for more stuff. If I was any good at all at Google Sketchup I'd put up the plans but I'm not. If anyone could help me with that, that would great. :)

Have a great day!

Built these for Christmas presents for the family. Used the 5 1/2 in wide pickets for the big ones. Used the 3 in wide pickets for the small ones, and cut everything else to scale. I don't have a kregg jig so I just screwed them in from the sides. Doesn't look quite as nice, but is plenty sturdy. I also added the mitered top like many others have.

The dark ones are Java Bean stain, the one is raw (obviously), and the other is Red Mahogany stain.

Super simple build! Thanks for the plans!

Built this headboard for my fiancee as her valentines day gift.

Built this project almost entirely of reclaimed pallets. I was able to keep the one skid almost entirely intact for the top and salvaged to 1x4 boards from the other skid for the bottom shelf. Th 2x4's came from yet another skid. My total investment was about $2. Finished with American Walnut stain and a satin polyurethane.

Our Tv veiwing area was a disaster. I found the console plans on ana's website. I had no Idea what a Pocket Hole was until I bought my lumber and a Kreg Jig. This was the result! Had so much fun I made us our first nice coffee table. Great plans, Thanks Ana.