Community Brag Posts

I made these chairs and table for my father as a Christmas gift to sit next to his pool. The chairs were fairly easy to make. To stay within budget I did use inexpensive white wood so the quality of the grain was not quite what I had hoped but I believe they still came out very nice. I used BEHR weather proofing wood stain in RedWood which turned out very nicely. The only thing that is currently lacking are the cushions. Due to the price of the foam that will have to wait.
For the table I started with the original plans on the site but when I realized just how long it would be I cut it down and added the two thin strips to break up the pattern.

If I were to do anything differently I would shrink the overall size of the chair to the size of standard cushions that can be purchased at local department stores or outdoor furniture stores to minimize the cost.

I build a Star Wars themed end table from a sheet of plywood and some scrap pine. Eventually, I'll add lazy susan hardware to make it spin. The top is glitter covered with a layer of resin.  Click on the blog post link for a full tutorial on how to build it. :o)

We have quite a fixer upper and while re-doing the bathroom, I came across Ana's Island plan in her book, The Handbuilt Home. This isn't the finished picture as we have installed the sink fixture and pipes, where I wrapped the exposed pipes with twine to give it a more rustic look. The table was modified in size and the mirror was a salvaged piece where I made a backer and framed it. Though still in need of some finishing touches, the look so far is spectacular... I wish I had a before and after photo. Much of what you can see, such as the tile in the shower and mirror has been made from found materials around the house or were items that were going to be sent to the dump. I love recycling!

New to building,

Stephanie Broker

Shortened the design to fit the spot and used a slab of white oak I had laying around.

I love this couch project. I can finally enjoy my deck in the evenings the way I envisioned. Thank you Ana White!

This was a quick, easy project. I needed a way for the dogs to easily get on the bed and I also needed a place to store their toys. This was a great solution to both problems. I made it a few inches loger and added carpet to make it easier for them to use. I also cut arches out of the bottom back to give them easy access to their toys.

I used 4x4 post for the base.

I took the base plans from your Rustic X end tables and added a little more detail on the sides and experimented with the stain combination. I stained the entire table in Golden Oak and for the based I stressed in an Ebony to give it a slightly burnt look in the base. Turned out really well. 

This is my very first project, and is from The Handbuilt Home. I had an old dresser mirror that I just couldn't throw away, and now I'm glad I didn't! It fit the frame perfectly. This project only took a few hours, and the plans were so easy to follow. Just have to get the hooks and she's done! Thanks Ana!

My wife had decided we need to do something special for our great niece's. .Oh that I should. Lol..It was a great experience, and I would do it again. .

Was a fun build. Took 3 days. Ana your awesome. 

My wife has been asking for new dressers for the boy's room for a while now but every time we go out shopping for them I am very disappointed in the quality of what is available. So I decided to make them myself. I have not made any furniture before and needed a few tools to help me out and thought what better way to get both the practice and the tools then build my own router table.

I searched the web for plans and found these great ones. I loved these plans but wanted to make a couple of changes anyway. I decide to build the table top as well as the cabinet and decided to make it a little taller to fit me better. Due to the changes and making the table top it took me 2 days to finish, 1 day for the cabinet and 1 for the top and to put it all together. (Not having used a router before it took me a while to get the template just right to cut in the insert.)

It works great and looks great in my shop. Now on to the dressers.

I'm a mother of three kids, so it took me a while to finish, but I also did some additional work on it so I would be able to stain rather than paint it.  I used a countersink drill bit to put in a bit of a hole that I filled with wood by using a plug cutter so that it would match more.  I also used epoxy in the knot so my son's baby toes wouldn't get hurt.  That's it.  I love it!

I'm building them all... this table is next!