Farmhouse Table and Benches
Thanks for the joy of this project! Our family of 5 just got a new kitchen table, and everyone pitched in to build it.
Thanks for the joy of this project! Our family of 5 just got a new kitchen table, and everyone pitched in to build it.
I have always helped my dad with projects, but this was the first one I ever did without my dad! The directions were very easy and I had no trouble at all. The table turned out beautiful. I modified it a bit by making it a little longer and using a 1x2 on the ends to cover the rough edges instead of a bread board. I also made 2 benches as we are a family of 10. I have 2 high chairs attached to the end. This table will seat 12 adults comfortably! I am so excited to finally have a big sturdy table. Thank you sooo much for this site. I have a new hobby now! ;o)
I used the Hailey plans with the following modifications because there's no such thing as TOO sturdy.
Instead of 2x4s on their own, I used the leftover lengths of my 2x6s for legs, joined at the corners (Kreg pocket hole screws) with 2x4s for a chunkier look and a very stable bed.
I made the legs 5" taller than the plans called for. Otherwise, the bed simply seemed like it would be too squat for my tall son.
For the casing/trim, which is pricey, I went to the Habitat Re-Store and found two matching pieces for $3.00 a piece.
I deviated from the plan by adding the trim last, after the headboard was otherwise complete. I had considered painting the casement, but decided to leave it all wood-tone, and I'm glad that I did.
The furring strips at my local big blue box store were so terribly warped that I used pine boards instead. This increased the overall price, but decreased frustration and time spent sanding. I work slowly and deliberately as it is, always worried about mis-measuring, so anything I build takes twice as long as anticipated.
With every project I undertake, my wood filler shows and my budget exceeds the amounts in plans and other brag posts. The bed and headboard combined cost me about $230 to build. That's still a great budget, but $80 more than I'd hoped after reading Shanty 2 Chic's inspiring details.
The stain on this bed is Minwax Provincial 211, and I used three coats of Minwax's water-based poly.
Best of all, my husband and I carried this bed from the garage, up the stairs, around the corner, and into a bedroom while it was fully assembled with legs. (He lost the bet on that one, saying I'd regret wood-gluing it all together ahead of time.)
I built this for my daughter's room. It is my second build. It is the perfect size for her room. I used chalkboard paint for the top surfaces. The knob is from Lowe's. Thank you Ana White for providing these fun plans! I am excited to start my next project!!!
The ongoing saga of our cruddy old kitchen is finally over, for the most part. We attempted the quick fix and failed and now with a little time, knowledge and cash we think we finally got it right. Our ceilings are lower than the average house so we couldn't buy stock cabinets. We custom made everything and added some accessories. All thanks to Ana-White!! You are so awesome!!
For more photos etc... just visit:
http://buckleyjournal.blogspot.com/2013/07/kitchen-reno-redo-20.html
Tue, 07/16/2013 - 13:45
Amazing job, MCBuckle! Off to click over to read more about it
Thu, 07/18/2013 - 23:16
You've got guts AND glory! :) Wish I had the confidence a year ago to build our kitchen cabinets. I hired a friend of a friend. It took months for him to build the 5 bases, then he took another job and left our kitchen without doors and drawers. If he doesn't come this weekend like he promised, I'm revving up our circular saw and growing some guts myself.
Thank you for the inspiration. (Oh, I was not able to post a comment on your blog. When it asked me to type in the code to prove I am not a robot or web spider, the submit comment button was missing.)
Fri, 07/19/2013 - 05:48
Go for it!! Trust me, if I could do it anybody can.
And thanks for the heads up, I think I fixed the comment issue!
I made this bar several years ago after returning from a deployment to Iraq. I used the spillway as a convenient location for some of my military award coins. At this point I had little in the way of skill so it is rough but everything else being equal, it turned out just fine for the garage man cave.
These are made from the three drawer plans but modified the size to meet our needs and used planks for shelves instead of drawers. Painted white and black gel stain.
UPDATE FROM ANA - We have received MANY requests for this plan and have created a plan inspired by this post here.
Shopping List (for ONE bedside table) + Tools
Cut List (for ONE bedside table)
Cut 1x4s and 1x2s with miter saw. Layout side panel 1x4s as shown above. Measure and cut 1x2 to length. Nail the 1x2 to the 1x4s, two nails per overlap with glue. Make sure your side panels are square. Build two.
Drill 3/4" pocket holes on inside edge of 1x4 ends as shown above. Cut 2x2s with compound miter saw. Attach to the 2x2 legs with 1-1/4" pocket hole screws.
Set Kreg Jig to 1-1/2" setting. Drill 1-1/2" pocket holes on end of each 2x2, one per end. Attach to 2x2s with wood glue as shown above.
Cut 1x4 shelf boards with compound miter saw. Nail and glue to the inside of the project as shown above.
Cut 1x4 top boards with compound miter saw. Nail and glue to top with 1-1/4" nails and wood glue.
If you wish to add a back, measure and cut from 1/4" plywood and attach with 3/4" brad nails.
Mon, 02/12/2018 - 16:24
Is there plans for this one? Its gorgeous and I'd love to build it!
In reply to Is there plans for this one? by laurahamer07
Thu, 06/07/2018 - 15:37
Hello, this nightstand was built using these plans http://www.ana-white.com/2011/06/reclaimed-wood-look-bedside-table instead of adding drawers the builder added shelves. The shelves can be 3/4" plywood or 1x boards.
In reply to bedside end tables by karenlouder
Thu, 06/07/2018 - 15:40
Hello, this nightstand was built using this plan, but instead of drawers, simply measure and cut shelves to fit from 3/4" plywood. http://www.ana-white.com/2011/06/reclaimed-wood-look-bedside-table
Wed, 07/24/2019 - 09:24
It's taken us a couple of weekends, but we finished our bedside table. We made two, but one still needs painting.
Thank you for the plans. We had a great deal of fun and learning experience making these.
Want to see it? https://www.facebook.com/photo.php?fbid=2830583376957272&set=pcb.283058…
My husband and I made this for our 7 year old granddaughter's birthday. She loved it!! As always, your plans are step by step and easy to follow. Thank you!!!
Sat, 02/26/2022 - 10:25
A gift that will be treasured for years! Thank you for sharing:)
Love the simple look of this collection! This was my first table to do. I will be doing more...such a great and sturdy table. The wood is absolutely beautiful stained too!
Simple project made from scrap wood.
See Build Instructions here:
http://www.instructables.com/id/Wood-Robot/
Robot Animation:
Built a smaller version of the grandy console with slot in the top for a sound bar. This was my first time using barn door hardware. Was a good time.
Whiskey on the left, Wine rack & glass holders on the right with storage in the middle. Frame built mostly with Pine, painted with Peppercorn Grey. Cherry tabletop with live edge. Finished with boiled linseed oil and semi-gloss polyurethane. A whiskey Bar should be fun! Stick on lights in each bay battery powered, comes with remote with many color options.
The Gallery Shelves were just the thing to refresh our front room.
This was my first project I did this many months back and I have just now started to put up brags after getting into building furniture for about 8 months now. This project was much easier than I expected and I did the build out in about two hours. When I did this project all that I had tool wise was a mitre saw, a drill, and a tape measure so if you want a project that uses minimal tools this one would be a great one to start with! I think that I spent around $125 on this bedside table and that number is a little bit higher because I used all premium wood because it was my first project. I stained it with Jacobean oil based stain and then I used the polycrylic finish (both by minwax) which turned out great I think!
Our son built this based off of these plans. He had to make the corner hanging areas smaller to fit our area, but we were still able to use this space for hanging items.
This is a modified version of Ana's park bench. Had a large deck, with plenty of room for a sectional.
I basically built two benches. One with an extended back (to create the back for the side of the second), and modified the front leg to sit under the frame, to allow the second bench to sit flush. I used lag bolts to attach them together on the seat base. Using lag bolts allows it to be easily taken apart for moving.
Love these chairs!!!
These were so simple, and SO FUN to build! These were done all while having a schools out party, and an evening outdoor movie with kids running wild! I really liked building them, and can't handle how cute they are! I used pocketholes and also brads and glue. Pretty sturdy, but I think I will use harder wood for them next time. We went to a cabin over Memorial Day, and we ended up leaving them for the owner because we thought they were so cute on her deck! My finish was super easy and fast because I wanted them finished so I stained, and dry painted then set them in the front to dry out in the sun, sealed with poly and TADA, DECK CHAIRS!!