Community Brag Posts

Built this headboard for my fiancee as her valentines day gift.

Built this project almost entirely of reclaimed pallets. I was able to keep the one skid almost entirely intact for the top and salvaged to 1x4 boards from the other skid for the bottom shelf. Th 2x4's came from yet another skid. My total investment was about $2. Finished with American Walnut stain and a satin polyurethane.

Our Tv veiwing area was a disaster. I found the console plans on ana's website. I had no Idea what a Pocket Hole was until I bought my lumber and a Kreg Jig. This was the result! Had so much fun I made us our first nice coffee table. Great plans, Thanks Ana.

Slightly altered Rustic X Coffee table to make it 46" long. Cutting the X's was tricky; I had to do it by hand with a table saw! I could wish for a miter saw that cut 30 degrees ;-)

This is a bench my mother and I made from an ana-white.com.

Adapted the woven back bench plan into two chairs. Talk about a ton of pocket holes!

Table with a small propane gas fixture.

This was my first project, and although large, probably the easiest I have built since. It was really simple, although I do know some things I will do differently next time.

This is the first dresser that I have ever made. There was a learning curve, but not much. It was a lot of fun and I hope you enjoy it!

This was my very first woodworking project that didn't involve making a sign or wooden cutout; so very gratifying to see it all come together.  I enjoyed adding some simple touches from other users (planked head/footboard) as well as my own (router ogee cut around the head and footboard tops).  Very happy with how it turned out and we will see how well it sleeps!

This project was inspired due to faulty installations of a standard toilet paper holder. Most builders do no frame behind where the holder will go leaving the hardware installer only drywall to work with. Over time the screws lost their grip allowing me to create this solution.

Using standard white pine and some gas pipe fittings I was able to create this holder and couldn't be happier with the way it turned out.

I ended up making three sets of these pedestals this month!

One set was for my In-laws, one for a friend and finally one for us. The two sets I gave away have a 12.5" opening underneath to accomodate two laundry baskets stacked inside each other for a total of six which is pretty good for most households. Our pedestal could only have a 9" opening due to the overhead cabinets in our laundry room so the shelf will not accomodate standard laundry baskets which is kind of a bummer.

I kept one pedestal fairly minimalistic because it's going into a laundry room off an outside patio, I added a bit of quarter round trim all the way around the top edge to act as a guard rail just in case the washer or dryer tries to travel off the platform.

The other two I trimmed out identically they just have different post heights to fit the space they are intended for. I used a little more trim than on the first pedestal, I believe it's window sash trim. Just as on the first pedstal I wanted a guard rail of sorts so I left the window sash trim with about a 1/4" reveal on the three visible sides and used quartter round on the back.

I used a very heavy black rubber runner I found at Home Depot which is sold by the foot on top of each pedestal as an additional water barrier and vibration dampner. I think this finished it off and really works well, I'm very glad I decided to add that.

My version was inspired by Ryans modification of the original plan so thanks to Ryan and Ana for these awesome pedestals, my wife, In-laws and friend love them!

Fancy X Farmhouse bench with pine base and poplar seat. Minwax Honey stain. 

A friend at work was wanting a chair for her front porch. This chair was a perfect fit for the space. I made the arms wider for more comfort. I have build several of these for family and friends. I even built a pair for my parents but made them taller so it would be easier for them to get up. They are so comfortable and very easy to build. I can't wait to build the sofa and love seat!

Loved this project! Bench made from old barn wood to put at the foot of your bed for extra storaage. 

I built this before my son was born to use as a changing table in his room.  I used leftover plywood from another project which made it a cheap build.  It is super sturdy and has plenty of storage on the top to hold wipes, diapers, and creams.  I used shelf lining and bought cute baskets to complete the look.  

I built a modified version with the top made of two pieces of poplar joined by pocket screws. The hinges are the back outside of the bench. I finished the top with 100% tung oil and painted the structure with barn red milk paint. I finished the lower shelf with a home made poly-tung varnish blend to make it more waterproof for wet shoes. I added some metal stars I found at a flea market because I like the look of the stars -- like those on so many old houses on the east coast.