plan was easy to follow! super cost effective because I just used scrap wood found in local stores and nails. It took me longer than expected since scrap woods are not as long so need to do time in sections at a time, but all worth it.
Thanks to Ana's 2x4 storage plan and a neighbor's discarded kitchen cabinets we now have a very clean and convenient storage area in our garage. It even features a work bench and sorting area.
My 2 grand girls wanted a cottage bunk bed. Not wanting to disappoint, I took the plans from the cottage loft bed and modified them, adding a lower bunk. I also added the steps, with storage on the side instead of the ladder, and made a drawer for the front step for the little one.
I made the wreath from Pom-Poms purchased from Jo-Ann's and battery operated string lights.
I opted for a cedar shake roof, which was purchased from Home Depot, then painted.
Needless to say, they love it!
Tue, 06/20/2017 - 20:13
this looks super awesome! :) I love the cute little shutters and all the nice attention to details :)
I have build several of these rustic desks. I left the "X" off of this one as I had trouble getting it to fit properly. My last desk I had no issues but not this time. I use MinWax "Provincial" stain followed by three coats of Varathan 3X glossy finish on the top and two everywhere else. I also added a cross piece between the two end sections to better secure the top to.
From the pallet style coat rack plans we saw from Ana and what she did for Ryobi Nation. Real simple to follow. I just change measurements to fit my space and other modificaitons because I didn't have quite enough 2x lumber. I saw the railroad spike hook idea on Pinterest and had a metal worker down my road cut them and thread them for me. I am very happy with it. I found a water-based stain (I HATE the clean up for oil based stuff) in a color called Aged Leather.
Built by my son and I. Followed the awesome plans for that most part.
We were looking for outdoor furniture big enough for our whole family and friends but everything we looked at was over $5000 and really not well made. Ana to the rescue.
We built 2 loveseats and created a couch by doubling the dimensions.
We built the whole thing out of redwood so total wood was about $1000
The cushions were from Overstock and Lowes, approx $300.
There was a too much wiggle room with the cushions so we made a built-in frame to hold them in place. If we built another I would have cut the width down slightly.
We placed a 4X4 and another 2X4 on top of the back to provide more support.
All in all, love the way it turned out.
I made the worm composter from Ana's plan and built a cabinet out of old pallets. The stack of worm composters drawers slide in and out of the cabinet on a heavy duty drawer glide set. I used cedar fence board. For 3 bucks a board, it was worth the work to rip them down and sand them. The bottom drawer has a tray built out of old flashing and slopes towards a hose bib in order to collect the worm tea. I designed the drawer insert out of cardboard and cut it out of flashing, using a pop rivet gun to put it together, sealing the seams with flashing caulking. The drawer has a sheet of aluminum window screen under the top square of cedar.
I made these stools to use with my counter-height dining table. The only modification I made to the original plans were I did not use the diagonal support and I used 2x6s to make the seat for the stool.
Was a little challenging at first but I was able to pull it off and it came out to be perfect
My wife and daughter wanted a shelf for her room - had to be pink. All I had to go on was a picture from a Pottery Barn ad. It's made from poplar and was my first kreg pocket hole project.
This was my first real build and it was a lot of fun. My girlfriend helped me out from time to time even though it was brutally cold in my un-heated, uninsulated, detatched garage.
We used a sagey green for the paint and 2 coats of gloss poly on the top. Added holes in the back with a hole saw for wires and cables. I stacked the false fronts and drilled them for the knobs all at the same time for consistency.
All in for about $210 including $40 in knobs, but I did make the drawers out of some scrap I had laying around.
The pocket hole joinery makes this pretty easy, but I'd highly recommend a table saw for consistent cuts and deminsions. Also, definitely use lay out lines and double check for squareness before driving the screws during assembly. Take your time, and enjoy the process. It starts to look very much "diy" in that not good "ummmmmm..." kind of way before the end where it all comes together.
Built this for my mother in law. Was so excited how it turned out.
We just moved to a farm and luckily the house has a wood shop! So we chose to do this farm house table as our first build at our new house. It was so much fun....and it was a great project for my husband and I to work on together! Total working time was about 10 hours, that did not include the time it took for the stain to dry and the poly to set. I am incredibly impatient and probably applied the poly over the stain too early, but with a project like a "rustic farmhouse table", the imperfections from my haste go unnoticed. Next build: barn doors.
My first brag post!
UPDATED: New photo with bar and stools on covered porch. Very happy with how it worked.
We wanted the Ballard Sutton Console Bar Table and three stools to go with our outdoor furniture. Unfortunately, that little package was going to run about $2,500. Decided instead to see if I could build the things and make up my own stools to match. So basically by studying the picture a little bit figured out my plan. Then the stools are more or less a mini version of the table with a couple modifications.
I haven't itemized the bill, but built 3 stools for about $50, and the table was a little less. Incidentally, I can never find decent common 2x2s, so I have started ripping 2x4s into two 2x2s, and they come out clean, sturdy, smooth, and most important, straight!
Stained them using MinWax Puritan Pine to try and get the new teak look we wanted. Not too dark -- wiped the stain after 5 minutes.
Have the stool plans if anyone is curious!
Best regards!
cstarliper
This table was built using wooden counter height legs purchased from Home Depot. The top was 3x6 natural pine cut from Stinking Creek Tennessee. The boards were rough cut lumber from a saw mill. I ran the boards thru a plainer. We left the saw marks on the edge, but sanded the rough part off. The apron is 2x4 wall studs purchased from Lowe’s. I screwed it all together with pocket hole screws and wood glue. The corner decorative metal pieces are from Hobby Lobby. The metal bar stools were ordered from amazon.
Comments
Ana White Admin
Tue, 08/31/2021 - 12:22
Very nice build!
I like the finish, that looks sharp! Thanks for sharing.