Twin Farmhouse Bed
Got it finished. Took a week exactly, with having to work and a few minor setbacks. We LOVE it!! Can't wait to start the next one!!
Got it finished. Took a week exactly, with having to work and a few minor setbacks. We LOVE it!! Can't wait to start the next one!!
My first attempt at making something this caliber!
Our deck was lackluster to say the least. It had been a while since we did anything with it and we didn't spend much time out there because of it. I wanted to add something cozy to encourage us to hang out there more. I searched the internet and came across this bench. It was just the thing! My son and I spent a couple of hours building it, and another day or two priming and painting. Now it looks great! We are out there all the time. Thanks Ana!!
This is the first bed I have built. It turned out better than I expected. The plans were great and easy to follow. I completed the bed from start to finish in two days. The steps I made from leftover material.
I made the coffee table, an end table and I modified the console table to add another shelf because I have too much stuff lol! These are my first wood projects and I am happy how they turned out 🥰
This was my first wood working project ever. I followed Ana's plan exactly except for the trim and partitions. I learned a lot from this project such as the correct pre-drilling hole size and the need for countersinks (I had quite a few split boards). I used Pine for the boards and MDF for the shelves but if I had to do it again I think I would go for plywood. All in all it was a rewarding project. The hardest part was the wood putty.
This was one of my first projects. I had some challenges with the cuts... I rushed through (since I had my 1 & 3 year old assisting) and didn't make exact cuts... as a result, there was a lot of trimming to do on the legs. Also, the pressure treated wood that we purchased was very weak and even with drilling pilot holes, I experienced quite a few splits when putting together the legs of the benches. (This is why I only have one bench, actually... I still need to buy more wood...) Otherwise, I love the table!!! I think I attached the legs of the table differently than instructed, though I can't recall what I did.. and we ended up cutting a 2x2 to tie in the legs (from mid-X to mid-X) for extra support. (My 3 year old son was leaping from the table and we wanted to make sure it could meet his demands.) We LOVE it overall!
My husband and I made this for our daughters' calico critters, which they received for Christmas. We wanted a house with few walls, so that all 3 girls could play simultaneously. We used Ana's dream dollhouse plan, but scaled it down to half the size. We also modified it slightly to fit what we needed.
This is just the perfect size for smaller toys like Littlest Pet Shop or other 3 to 4" tall toys.
This was our first build together and so it took us a while to do. For someone with a bit more experience, who also has all their materials and tools ready, this could be finished in 1 day or a weekend.
Sun, 05/10/2015 - 13:06
Ana's roof shingles, which are cut scalloped strips, are a better way of doing the roof. I didn't realize how difficult it would be to fix each craft stick 'shingle' to the roof, and manage to keep each line straight. For a beginner, it's not easy. My advice is try Ana's method or you could also just make the roof from 2 solid pieces.
Wed, 10/07/2015 - 14:07
This was the plan I was going to use for the Critter's line at Target. I didn't want to buy the plastic houses that they sale so decided to try and build one. How did you scale the dimension? Just by half all the way around? I am a confident beginner so I am not sure how to scale down dimensions.
Modified From Ana's Fancy-hall-tree bench plan.
I wanted a kitchen table that was bigger than the one we had from Ikea, but the Farmhouse Table was too long. So we modified the length, left off the stretcher, and painted it a bright blue! The major lesson learned in this project was to be sure to store boards carefully. We bought the lumber, cut the boards, and then didn't work on the project for a couple of months. Even though the wood was in our garage, some of the boards warped a bit, leaving us with bends and curves to deal with once we started to build. Luckily, things came together, but there are many more imperfections in this table than would have been there if we'd built it sooner. But we still love it!
This table was actually our very first project! It took us longer because of that, but really, this table isn't very complicated at all! Cutting the arches were probably the most difficult part of the whole thing (hence why we left them off of the matching bench).
We modified this table down to 7.5 feet, but still kept the three arches because we loved the look of it. This table can still easily seat 8 people.
We modified the bench by not framing the top and leaving the arches off, but kept the same look of the legs so it would still match and keep the time/difficulty low.
I came up with a simple design to build a nightstand for my daughter's room to go with the platform bed that I had just built. The only problem was that my daughter is 3 and she isn't very tall. So I figured a 2ft tall nightstand will do!
Built by Wndy D Keever-Keefe
"This was my very first build ever. Totally inspired by Ana White, I happened upon her site one day about 4 years ago and have since built lots of her plans."
Dear Ana White.,
First, I am a fan of your woodworkingand I follow you on YT. I like your approach to projects, making it simple and easy but still making very fine pieces that both are nice looking at and good for use.
My former neighbor needed a bench in the hallway of her new apartment; with the desired measures (roughly) 5’x19-20”x18” (150x50x45 cm). And then I saw your mudroom bench on YouTube which inspired me building my own bench according to the general ideas from yours’. So, I made like a frame with 2x3”, then I let the plywood sides proceed down to the floor, leaving a space between the carcass and the floor of 15 cm (6”), for shoes. Three drawers and using a scrap bit as space block for the drawer slides it was not that hard to get them in place. The top sheet is a slab of massive oak that are sold as “shelf material” at our local store (Bauhaus, possibly the Swedish equivalent for home Depot?).
I think it turned out pretty well, and I am grateful for your work, inspiring me and making my own woodworking easier.
Best//Göran Redmo Tyresö, Stockholm Sweden
Fri, 11/05/2021 - 11:36
This is a timeless beauty, I love the mods you made, thank you for sharing!
This was our first project. My husband and I took the Farmhouse bed plans and modified them to look more like the Hudson Bed from Pottery Barn. This is a King size bed with removable side rails and under bed supports so that it can easily be collapsed for moving.
There were a few misprints in the supply/cut list but if you read through the comments section it helps. I ended up making a list of the supplies and adding a column next to it with the cuts, that helped. Oh, and the store I bought the knobs from didn't have enough but the last one is coming! Pretty happy with the end result. Thanks Ana!
My first project built on the garage floor. Before I had work benches :)
I used a borrowed mitre saw, borrowed jig saw and a $20 drill.
very easy. I ordered my pins and ball off amazon
What a great project! Simple and relatively easy. Very stylish chair!
I built the Full Storage Bed using Ana's plans! It was very easy and I love the storage space! You can see it and my modifications at our blog http://www.shanty-2-chic.com/2011/03/crates-for-storage-bed.html
I stole this idea from another brag and had to have it at my wedding. The Bench was fairly cheap to make and took about 4 hours total. I hand made the stencils using cardstock, shipping tape, Xacto knife, and alot of tedious cutout work! I used a sharpie silver paint marker to fill in the stencil. Turned out great and now its at the foot of our bed and we get to look at all of our guest comments everyday!