Community Brag Posts

This is the second time i made these tables.  The first time was for my son and his fiance to match the farmhouse bed that i made for them but i did not do the inset drawers.  Tried but couldn't get them to sit right.  My niece liked them and didn't have any tables to go along with the bed her new huband's grandfather had built.  I love the inset drawer look so i tried again.  The first one i had no problem with but the second one had to make the drawer box over a couple of times.  I did differ the pattern a bit and used 2" top instead of 1 inch simply because i had some leftovers.  I also used drawer slides instead of wood slides.

modifications to plans: legs not tapered; shortened table by two feet.

I modified the Braden Shoe Shelf plans to fit our entry space. I also wanted 4 cubbies, one for each family member. This was a Huge learning experience for me but I loved every minute.

I followed Ana's instructions  except for my bench was 56" in length and stained the top red bottom brown. 

This was my first time building furniture. The plans were easy to follow and it was a ton of fun to build!

This is the first time I've built something. My wife found this site on Pinterest, and made hints about wanting a kitchen island. Our apartment has maybe 3 feet of useable counter space, so I thought this would be nice to have. Ignore the tools in the picture, I literally just finished it and just put stain on it. Overall, I think it came out pretty good, and I really like the design of it. This site is pretty awesome. I've already picked out my next two projects from here. Thanks Ana!

Kyle

I made this Farmhouse bed frame for my king sized sleep number bed. It is a little wide but overall I am very happy with it. I also made the nightstands from the Kentwood plans. The handles are diamond willow that I picked from the Northwood of Wisconsin.

This was my husbands's 1st Ana White project

This was the second part of my Tryde media center build. You can read about the console build here.

This part of the project was very quick to put together, I spent a lot of time reading the brag board and looking at pictures of what others produced.  I really appreciate when people upload high res pictures of their builds so you can really look at the details - I've tried to do the same on my blog post about this project in case you needed further information (see link below).

I made the plan as per Ana's original, with some modifications.  These were:

• added a back kickboard at the base for stability
• added trim around the back and sides at the base to stop it toppling over
• added felt to the feet to avoid scratching my console underneath (worked so hard on that one!)
• added 'L' shaped brackets to join the two pieces together, for added stability (check my previous post for more details on this)
• changed the orientation of the beadboard on the back to be vertical and not horizontal (I just preferred it this way)
• after seeing Perchik's build of the Tryde media center I shamelessly copied his idea to extend out the trim around the top.  It looks much better wrapped around than jutting out the front, a little less severe I think

I hope you would give this project a go, as a hutch it is very simple to put together for a beginner and quite satisfying.  To get more information about my build please read my blog post where I go in to a lot more detail (and leave a comment too, I'd love to know what you think!)

Happy building!

This was my first real woodworking project and I loved it! I had a big helper (my Dad), who has a full woodworking shop teach me how to use the different tools and assist with building. It took a while longer than the plans say because we did some extras like powersanding and rounding off all the edges on each piece before assembling it. My Dad was very picky about it having a polished look! Plus, I insisted on my Dad teaching me, not doing everything for me. We also predrilled and glued on 16 hinges so it would fold. That definitely took four hands to do and the majority of the time.
My 'small' helper (our last name is Small) and son Dominic is almost two and loves using it. In hindsight, I would have made it a couple inches less wide overall to fit better in our kitchen that has limited counter space. And would have painted it prior to screwing the sides together with the hinges to make it easier to paint. However, I built it at my Dad's over the weekend, then painted it later. I chose the bright green colour so it would be playful and gender neutral to pass on once we no longer need it.
Thanks for the inspiration and great plans! I will be back for more projects!!!!

Enjoyed making this project.  Instructions were great.  Very happy with the results.

I actually used the “Bedside End Table” brag plans. This is my first project using plans from this site, I’m pretty happy with it:)

I painted the entire cabinet a dark blue, then painted over it again with an antique white. After it was completely dried I sanded it all down to give it a distressed look. I used antique label holders for the drawer pulls.

Not bad for my first project!!  I decided to upholster the chairs so i used a solid piece of wood for the foundation of my seat and also decided I was going to use chalkboard paint I had left over

This is a great place to put on shoes and hang up your coat. My husband loves it. You can place your shoes on the shelf under the bench.

First time building furniture. This turned out much better than I thought. After this I probably could've build the farmhouse table myself instead of paying way too much for my wood dining table. Only if I have found Ana's site sooner. :)

Having a Kreg jig also made the whole process much easier.

We wanted to build a farm table with benches to accommodate a few more people in the same space. This plan was easy to use. We modified a couple of the supports to metal piping to change the look up. We also painted the table and used a stencil to create a old world feel to it. It was a very fun project!