Community Brag Posts

Finally got the time to do the farmhouse table. Changed up just a few things. Flipped the ends around to add more leg room and put a 2x10 as breadboards. Chairs fit in about 8 inches under now and plenty of leg room and I'm 6'3. Only real adjustment is shorten the stretcher board by 3 inches total but just do stretcher board last and measure it to fit exactly.

Also wanted a different style bench so went with the bench that matched the Big Ur Farm Table and Bench and customized the benches to fit. Also instead of 2x4 all across top of bench I place a 2s8 in center. Adds just a 1/4 inch in total depth and looks great and one less board to do pocket holes on.

My husband and I built this dresser to use as a changing table in our daughters nursery. I explain the build process (with photos) in this blog post : http://mekhart.blogspot.com/2011/03/nursery-room-biggest-build-yet.html and the finishing process in this blog post : http://mekhart.blogspot.com/2011/04/nursery-room-finished-dresser.html . I'm so thankful to Ana...I love that almost every element of her nursery is home made!

After searching and searching for a decently priced bed for our two year old and failing to find anything that I liked under $400, I decided to do a google search and came across the directions for the Emme twin bed. I loved the design and the color of the stain in the instructions but had to go with white as everything in our toddlers room is white. My husband said the instructions were simple to follow. I think he did a wonderful job for his first time ever building anything. Not to mention my little girl loves the bed. Thank you Ana!

I originally found this on a Pinterest link. The DIY'er kindly blogged instructions as well as a template file for the side pieces. This is a child's rocker toy that uses non toxic food dye for the colored parts of the wood. A template is provided for the end pieces through a link provided or you can just eyeball your own. Overall, it is a fairly easy project but a bit time consuming.

When cutting out the template for the sides, it is best to cut the smaller holes first and the do the larger outer lines.

I used a Kreg's jig, Mitre saw, Jig saw, and a palm sander.

I wanted to build my wife a matching set of bedside tables for her birthday and loved these plans! However when I measured the space on either side of the bed found that these plans were too large. Some quick calculations later I modified the plans to create some smaller tables and it worked out perfectly! I removed two 2x4s from the top and the bottom shelf and took 7 inches off each of the aprons and voila, smaller tables!

i used minwax wood conditioner, “honey” stain and two coats of polyurethane. Very pleased with how they turned out and the wife was so surprised and happy! Thank you!

I built this to house some free lettuce seeds. Please see the full story on my blog!

Bristol chairs with an attached side table. I added a planter box under one of the boards to fill with ice and beverages.

Used repurposed lumber for most of the project. Only thing I bought was the cedar pickets. This project cost less than $9

I also chose to cut the tops off and add mitered boards on top.

We doubled the height and added another shelf! Amazing build and amazing plans! Thank you!! This was our first build. We are novice

It is a friend's birthday on 5/6 and I noticed she didn't have a nightstand so instead of buying a present, I decided to make her a nightstand. I really liked how the person who built "Lee and Beth's Simple Nightstands" used bead-board on the sides, and I have a lot of bead-board left over from our master bathroom renovation, so I decided to use it, too, and that way I wouldn't have to buy the wood for there, because I didn't have any extra plywood to use there. I also used the bead-board on the back and as the bottom of the drawer.

It looks more modern-cottage than it does modern, like I wanted, but it still looks good.

Pictures are of what it looked like pre-sanding and wood-filling, with 1 coat of the stain on it, and then finished with white paint.

With the combination of scrap wood and new wood, I only spent $20 on new wood for the project, and $5 on the drawer pull!

For the top, instead of a 1x12 and 1x3, I used a 1x12 and and then flanked it with 2 1x2s - for a more balanced look. I also cut the 1x12 at like 19 1/2 inches instead of 18 1/2.

Ana thank you for the wonderful plans. It was my first major project, and it will not be the last. I purchased your book this weekend and love it!!! Thank you for all you post to your site.

Finally got around to getting my daughter's closet organized. Made some adjustments to the plans to better fit our size needs. Everyone in the family is very happy with how it came out.

I used the Rhyan end table plan (with a few alterations) to make my nightstands. I changed the dimensions so mine turned out to be 20”D, 25”W, 27”H, I extended the side and back panels all the way to the top to close in the shelf and I made the bottom drawer larger. I decided to use under mount drawer slides but I think I will try out the side mount slides in the future though.

I wanted them to match the headboard and bench that I made for my bed so I added the same molding that I used on those pieces to finish it off.

I pre cut every piece for the main body of the nightstand and predrilled all of the Kreg holes which made it a really quick piece to put together! I purchased the Mini Kreg jig for this project and am so glad I did. Totally worth the money!

It was time for potty training and when it came time to wash her hands her arms were a little too short. So I threw this step stool together over a few hours and with the little one being a Minnie Mouse fan I had to add the Mickey head. Great project for those wanting something easy and quick.

I've made a couple of tables from this plan now, and I love the simplicity of it. I changed the top to 1x4, 1x6 so that it doesn't look so bulky.

Built and painted to match toy bin.