Community Brag Posts

Decided to build a bedroom set and like the Rhyan end table, but fell in love with tiled version. So we used porcelain tile on top.

I had some left over Walnut wood, so I decided to make some more Beer Tap handles.  This is a fairly simple DIY that doesn't take that long to complete.  I have already written a full tutorial on my blog:

This was my first ever attempt at making something real out of wood. I've only made some really basic floating coat hangars and docorative rustic pieces to set around peoples houses and a spice rack. I really wanted more of a challenge and this was a perfect place to start. I had to purchase the Kreg Jig and a couple of large clamps but once I got the hang of drilling and filling pocket holes it was smooth sailing. 

The Mrs then finished it off with some lovely rustic baskets and a serving tray with all the latest Southern Living magazines.

I love these plans! I build a reading loft tree house for the kiddos that they love... and I might love even more.

I love this table and bench set! Very easy to build and didn't take too much time. We made it a family build. My kids helped put together the benches and table. My wife and kids did all the staining.

well after I made my daughters bunk beds my toddlers were begging and begging me to make them a bunk bed so this weekend I decided to make a toddler bunk bed. So here it is and I'm here to share with you all.

Hi Ana,

 Here are a few more pics of some tables I've built! I would love to know what people think!

Thanks!

I made this buffet, serving table to go with a large gathering farmhouse table I made. I loosely used the farmhouse table plans but did some designing of my own based on a picture my friends had of what she wanted.

i made this a while back, but just got through painting it. Saw it was a great table for drinks, will serve a double purpose.

Well, one thing's for sure. Follow Ana's plans and everything will come out just right.

Oh. And another thing. I can't get my kid out of this bed! It's awesome. And really simple to make.
Thanks, Ana!

This was produced from the Queen version by adding 16 inches to the width of several of the pieces of wood.

I followed the X-table plans for the base and then went a little nutty on the table top. I also beefed up the bottom stretcher on the base as I felt it complemented the 4x4s used for the feet well. I left off the diagonal braces as I liked the contrast of the beefy legs and stretcher and the open airy appearance between the base and tabletop. There were several blogs/ideas on Pinterest about a Chevron style table top. I took pieces from all of them for my design. The table measures 99.75 inches long by 41 inches wide. I thought being a quarter inch under 100 was a bit quirky and did it merely for that reason. Oh and please forgive the photo bomb by my daughters. I could not take a picture without getting at least one of them in the frame. My oldest is being a little silly in the pic trying to show the detail of the Chevron design--or split Chevron as I'm calling it. 

I wanted to start building right away....But had nowhere to build! Anna suggested the Kreg Jig, and since my birthday is when I found the site, "suggested" this as a gift to my daughter, who passed it on to the big guy...and viola, Master Kreg Jig. Happy Birthday to me! I got the plans from the Kreg Jig Community....super helpful site, answer all questions, and a great resource to beginner builders.
The worktop is made of 2 pieces of MDF, which is SUPER durable. Loved working with it. This took a day, and not a day goes by that I don't use or get some kind of compliment on it. What's really neat is there is a utube video to follow as you build geared towards the just starting out builder, which shows layout, cuts, jigging, very easy to follow. Plan is on Kreg Jig Community, free if you register, as well as lots of cool free plans....not quite as cool as Anna's :)
Very reasonably priced about $70 inc 100 ct Kreg screws

This is a wall ornament I made for my daughter for their get away home on the golf course at Canadian Lakes, MI. "No animals were hurt in the mounting of this moose head" The only thing to suffer was a few pieces of scrap wood that I had laying around.

This project evolved from us purchasing the wrong foam to go under 4 area rugs.  After it didn’t work for the first rug, we had 3 more rolls of the stuff that we couldn’t take back to the store (we had waited too long to do a return).  I originally had intended to buy an inexpensive sectional sofa for the downstairs family room, but with all this foam staring at me, I decided to put it to use and make sofa cushions.  There was enough foam to do a whole sectional!

The sofa frame is based on Ana’s Outdoor 2x4 Sectional sofa.  I adjusted the size, because the fabric I wanted to use was 54” wide, and that would fit nicely around a 22” deep x 4” thick cushion.  Each cushion is 11 layers of the foam (seat cushions: 67 x 22 x 4, backs: 67 x 18 x 4). That length for the cushions fit exactly into the 8 yards of fabric available on the bolt.  The next week I ended up going back for some more fabric for the corner cushion and an ottoman that's in work. 

I had the frame assembled and was ready to add the final upper back pieces, when Hubby suggested we give it a slanted back.  That required a little re-engineering and a couple of extra boards on the back and armless end.  Instead of using 2x4s the full length for the seat, I had used some 1x2 furring strips reclaimed from another project.  Also used some of those for the upright pieces for the backs.  Added some 1x6 to top the arms and ½ x 3 ½” craft boards to the front to hide the cut 2x4 ends.

The cushions are covered in a polyester faux tooled suede (fabric from Hobby Lobby).  The cushion covers are slightly loose on purpose, to give the nice worn squishy look that a real soft leather sofa cushion would have.

It’s surprisingly comfy and we love the look! 

I have a rustic outdoor room made out of our garage. We started the project last summer but it took until this weekend to get a table built. I was skeptical that I would be able to build a table myself, but I knew this table would fit in my backyard decor and I had to do it!

Using the plans from the site, I was able to build this almost entirely by myself. I got help for flipping it and adding the side aprons.

I started around noon with a trip to Lowe's and was done by about 7:30. The wood and screws cost around $50. I still have to finish it and am thinking of staining it dark brown.

Also, the guy at Lowe's recommended that I used deck screws. So that is what I used. I did not pre-drill all the holes. I also put the 2x6s in the table top, then flipped it over and added the 2x2 supports and screwed them in. I think that saved some time and seemed to work out okay.

Thanks for a great project, Ana! I am so proud of myself that I did this! Now I am off to make a bench to match.