Community Brag Posts

I followed the basic plans for the kent wood nightstand but made a few changes. I made paneling out of 3/4" plywood for the sides and door/drawer and routed a 1/2" by 1/2" channel into the face frames to slide the panels in. I added a drawer and made the door smaller. Instead of using the strips of wood for the top I framed it with 1x3's and inset a piece of Wedi tile underlayment. Wedi is a closed cell foam that is coated with a cement membrane. It is pretty durable and completely waterproof. I then used white thinset mortar and set 3x6 tumbled travertine in a herring bone pattern using a 3/16" v notch trowel. Grouted the top of the tile and caulked with color matching latex caulk where the tile meets the wood frame.

Built using the Farmhouse Bed - Queen plan, making adjustments for the Full size matress.  The finish is a blue milkpaint over a white base and distressed with a sanding pad. 

This is the 52 inch waterfall console. I fell in love the it and thought it might be a great way to store my bed pillows when they aren’t in use. I modified it to be shorter and taller, to fit my space and needs. This was my first time using a kreg jig and brad nailer… tutorials on those would be great, but I figured it out! And I’m so excited I did - this is a game changer for my building projects!

I followed the plan almost exactly, I just made it to fit the space that I had. It was super easy and I love the way it looks! And I used contact paper from target to decorate the drawer face and the shelf. I also made the shelf a pull-out shelf using the same type of drawer pulls as the drawer. i made that shelf the same width that I made the drawer and it fit perfectly!

The longest part of this project was drying time for stain and paint and such. I did not include that time in estimate for time to build.

I saw this table on Anna's website from rogueengineer.com. The plans were simple to follow. I made it out of pine, 2×4s, and baltic birch ply.

I am new to this. I used your plan but reduced the lenght by 24 to make a 2 seat Garden Bench. I used softwood and painted with this outdoor paint. Thanks for inspiration and plans. I am located in Victoria, British Columbia, Canada.

This was my first ever project. The table that has a white base is another table I built after the stained one.

The project took several weeks because I only was able to work on it on Saturday mornings. I'm happy with how it turned out and learned a lot from it! I have a new love for woodworking and enjoy the whole process, from design, to completion.

Thanks for checkling it out!

Thanks for the awesome plans. Read a lot of feedback from people saying it was too small. Just make it bigger! Used same plans but 6 1/2 long and 4 inches wider. Added extra support to the table top and used all 2x4s. Lovin it

DIY Adirondack Chair

Our girls had made do with hand me down room furniture and decor( youngest 2, out of 5 girls). It was time to give them a space they love. I have never built anything other than slight upcycle projects. Slightly modifying this or that , never just starting with lumber and a plan. They picked the farmhouse beds and my husband was gone for 3 weeks backpacking, so off to buy lumber. Not as easy NO ONE HAS UNTREATED 4x4 posts!!!!! i called 3 counties, almost cried, to order was 3 weeks, or just cant get them. Finally found a cedar and cypress mill 1 hr away. Hopped in the car and off i went to load up.I had 2 beds to do so the second one went faster. What i learned?
1. even after predrilling you will do best hand screwing screws. Cypress was really hard in places and a stripped screw equals stress.( just like there is no crying in baseball, there is also no crying in carpentry)
2. the 2x4 that is under the 2x6 on headboard and footboard should be cut AFTER you assemble the 1x6 and 1x4 base. Much easier than making cuts with a circular saw on 1x6
3. your hands will feel like they were run over after day 1 of sanding, it will pass and get better.
4. perfect is not possible. It probably not even preferable. You want perfect? That is a machine
The room still needs some special touches, lamps, nicknacks, etc. cannot paint , rental. so sad. oh well

My daughter and I made this for a Father's Day gift, along with a bike rack, to get my husband's bike "shop" in better order.

so i put this storage shed on the outside wall of my garage and then i put my dust collector inside it and cut a hole for the pipe to into the garage. It's nice and out of the way now. I adjusted the size a bit to make it fit more of my outside tools like the trimmer and blower. Its not in the picture but I also extended the roof about 30 inches over the side to park the lawn mower under it. If I were to do it again I'd make it even bigger.

We had a 28 inch nook in the mud room/bathroom that was the collect all for our shoes, hats, boots, scarves, and pup accessories. Had seen shoe cabinets at ikea but with the space being small it needed a "custom" build. Ana had the perfect solution!! We took basic plan and reduced length to 28 inches and top width to 12 inches. I wanted a larger top surface to place baskets. We took the 2 drawer and added a 3rd for increased storage space. Drawers were also made deeper to fit with the wider top piece. Also added a 4 thick chunky legs (4x4) to help support and stabilize dresser. Those were set in a bit to accommodate the molding along baseboard. Added faux drawer fronts using 1/4 inch ply wood. We put the magnets on but made drawers hard to open so we kept magnet but removed the plate. An old leather belt was recycled for the back strips to prevent drawers from flopping down.

Found this on Pinterest and FELL IN LOVE! I have 2 kids that are inseperable, ages 3 & 4, a boy & a girl. I had been toying with ideas for them about bunk beds or maybe some PVC forts. But when I found this, it was like everything in one. Let me also start off by saying, although I am artistic I have never used a single tool or built ANYTHING in my life. EVER.

The beds were surprisingly easy to build and are incredibly sturdy & strong. I followed the plan exactly except for the platforms. I made my daughter's huge. (The plan calls for 22", I made hers 50") My son's I made smaller b/c that wall is shorter & there wasn't enough space. So his is only 16" but it's still plenty of room to climb up & get into bed. They use her platform as a stage to perform on or a small play area.

I'm going to glue down padding to cover both platforms and all the stairs b/c my kids are small but rough & tumble and I can already see the hospital bills. But the bed is EXCELLENT! Surprised to see no one else has posted a brag for it!

Make this immediately! The priming, painting & building for each only took one day. ONE DAY! I painted the room, the trim, and made both beds over the holiday weekend (Labor Day, Friday-Monday). My kids are now the envy of every child (and adult) that we know LOL!

I made this cabinet for my 9 year old daughter. My daughter enjoyed filling the shelves with her things and the door with her ear rings. The shelves are made from 1x3's. I added 4 small hinges and 1 magnetic closure. The stain used is purple (daughter's choice). This was a fun build that took 2 days start to finish.

We modified this just for more stability around little ones. I also torched the Oak top so the grain would be more prominent and routered the edge. 

I followed the instructions to a T.
This is a very simple build and makes a great bed. My daughter loves it and I love the look.
I didn't screw down the 1x2 supports because I was having trouble with the wood splitting. It's worked out fine this way, I just need to rearrange a little bit when I change the bedding on her mattress.
If you have a kid who likes to climb or jump on their bed a lot, be sure to use a lot of screws to connect the bed frame to the foot board.