Community Brag Posts

I built this table after seeing a similar one on your site. Mine is built with 2x2 legs, a shelf, and just one piece of 1x12 for the top. I was wanting something for in front of my window but this one is to small so I will eventually build a bigger one for in front of my window and move this one. Thanks for the inspiration!!

This project is the coolest.  The laundry room was a sad sack of disorganization, open cabinets (who took off the doors??) and no surface to work on.  The dog food sat in its' bag in between the washer and dryer.  Here's a video of the makeover: https://www.youtube.com/watch?v=xIi2Ay2vXEE

Used Ana's tut on making raised panel doors, and purchased tiny trim moulding to fancy it up.  I also routered the edges to give detail.  I LOVE these doors!  I created the dog food pull out bin to match it all so the food is concealed.  In hindsight, I should've sprung for better bigger wheels because we have 50 lbs of food in there and it's a little difficult to pull out when filled all the way.  It's just a cardboard box lined with a trash bag and painted white on the outside. 

Table top was made from plywood and scraps.  It's more useful than I thought.  Very nice to have a solid surface to put stuff on.  Routered the edge of the plywood for a more finished look, though I'm not sure that's wise with plywood. I love that the cabinets are now closed and I painted the room so it looked more fiished.  Yay for $75 room makeovers!

My wonderful husband and father built this dry bar for me using the Rustice X TV console plans.  They modified plans to so it is 42" tall, 6-1/2' long, and shelving is wider and centered.  I love it.  Thank you for sharing your plans.

Built these for Christmas presents for the family. Used the 5 1/2 in wide pickets for the big ones. Used the 3 in wide pickets for the small ones, and cut everything else to scale. I don't have a kregg jig so I just screwed them in from the sides. Doesn't look quite as nice, but is plenty sturdy. I also added the mitered top like many others have.

The dark ones are Java Bean stain, the one is raw (obviously), and the other is Red Mahogany stain.

Built this headboard for my fiancee as her valentines day gift.

Built this project almost entirely of reclaimed pallets. I was able to keep the one skid almost entirely intact for the top and salvaged to 1x4 boards from the other skid for the bottom shelf. Th 2x4's came from yet another skid. My total investment was about $2. Finished with American Walnut stain and a satin polyurethane.

Our Tv veiwing area was a disaster. I found the console plans on ana's website. I had no Idea what a Pocket Hole was until I bought my lumber and a Kreg Jig. This was the result! Had so much fun I made us our first nice coffee table. Great plans, Thanks Ana.

Slightly altered Rustic X Coffee table to make it 46" long. Cutting the X's was tricky; I had to do it by hand with a table saw! I could wish for a miter saw that cut 30 degrees ;-)

This is a bench my mother and I made from an ana-white.com.

Adapted the woven back bench plan into two chairs. Talk about a ton of pocket holes!

Table with a small propane gas fixture.

This was my first project, and although large, probably the easiest I have built since. It was really simple, although I do know some things I will do differently next time.

This is the first dresser that I have ever made. There was a learning curve, but not much. It was a lot of fun and I hope you enjoy it!

This was my very first woodworking project that didn't involve making a sign or wooden cutout; so very gratifying to see it all come together.  I enjoyed adding some simple touches from other users (planked head/footboard) as well as my own (router ogee cut around the head and footboard tops).  Very happy with how it turned out and we will see how well it sleeps!

This project was inspired due to faulty installations of a standard toilet paper holder. Most builders do no frame behind where the holder will go leaving the hardware installer only drywall to work with. Over time the screws lost their grip allowing me to create this solution.

Using standard white pine and some gas pipe fittings I was able to create this holder and couldn't be happier with the way it turned out.

I ended up making three sets of these pedestals this month!

One set was for my In-laws, one for a friend and finally one for us. The two sets I gave away have a 12.5" opening underneath to accomodate two laundry baskets stacked inside each other for a total of six which is pretty good for most households. Our pedestal could only have a 9" opening due to the overhead cabinets in our laundry room so the shelf will not accomodate standard laundry baskets which is kind of a bummer.

I kept one pedestal fairly minimalistic because it's going into a laundry room off an outside patio, I added a bit of quarter round trim all the way around the top edge to act as a guard rail just in case the washer or dryer tries to travel off the platform.

The other two I trimmed out identically they just have different post heights to fit the space they are intended for. I used a little more trim than on the first pedestal, I believe it's window sash trim. Just as on the first pedstal I wanted a guard rail of sorts so I left the window sash trim with about a 1/4" reveal on the three visible sides and used quartter round on the back.

I used a very heavy black rubber runner I found at Home Depot which is sold by the foot on top of each pedestal as an additional water barrier and vibration dampner. I think this finished it off and really works well, I'm very glad I decided to add that.

My version was inspired by Ryans modification of the original plan so thanks to Ryan and Ana for these awesome pedestals, my wife, In-laws and friend love them!