Modern Farmhouse Entryway Console
Built 2. Stained one Briarsmoke the other to be determined. Thank you Ana for the inspiration and plans!
Tim Basoco
Built 2. Stained one Briarsmoke the other to be determined. Thank you Ana for the inspiration and plans!
Tim Basoco
I started with the simple white outdoor sofa, then the factory cart table, adirondack stool, and 2 simple outdoor lounge chairs. Wow! This was my first adventure making furniture. All in all it took me about a month to make everything in my spare time. I made a few mistakes along the way, all part of the learning curve. But definitely learned so much from this site. I am forever grateful to you, Ana.
Thu, 05/31/2012 - 05:53
You did an amazing job and I just love the happy colors you chose:-)
Thu, 05/31/2012 - 06:00
Thank you bhoppy! I wanted colors that contrasted with all the blue-grey on the deck. It was so much fun.
Mon, 06/04/2012 - 07:10
Yes, for the factory cart I painted angle brackets black. I also painted the caster wheels that I got from Tractor Supply.
Sat, 05/25/2013 - 10:22
What width foam did you use for your cushions? I've been wanting to make some outdoor furniture, but the price of foam is holding me back. I've found 3" for a reasonable price, I just don't know if that will be thick enough.
Sat, 05/25/2013 - 12:17
I used a 4" foam, but I think you could easily use 3". I know foam is not cheap. I shopped online for foam suppliers and found a pretty good deal... much cheaper than local fabric stores.
Sat, 07/13/2013 - 16:19
This is beautiful! I'm planning to make the chairs and I'm wondering if you changed the plans at all, especially any dimensions? Maybe it is just the angle, but the arms look a little lower, which I love. If you can let us know what you did, I would really appreciate it!
Thanks!
We are developing a completely off-grid property and before starting on construction of the house, we decided to start with a smaller project to get our feet wet (no pun intended!). We also wanted a place to soak our sore muscles while we build a house since we are restricted to taking 60-second hot showers, and so we came up with the idea of a wood-fired cedar hot tub.
Buying a cedar hot tub retail can cost anywhere from $3,000 to $7,000, but we were curious to see what we could build our own for and it turns out, we spent $850. Since there were no existing plans on the internet that we cound find for such a project, we decided to document the entire process and make our own! We struggled a bit with the build, but on our blog we documented what worked to save other people time who want to build something similar. In our post here, you will find a 9-part video series on how we put the hot tub together. Enjoy!
Sat, 06/18/2016 - 11:23
Looks like your hard work paid off and it's beautiful to boot!
Truss bench made from reclaimed 2x4's
Built from Ana's doll bed plan. Added a drawer to match my granddaughter's bed and painted it her favorite color.
Pallet Bookshelf.
A great project turning old pallets into a funky bookcase.
My bookcase is slightly different than the plans that dan-k put up but that is mainly because of the type of pallet i used - there may be a difference between US and european pallets?
I recommend getting 3 pallets, all of the same size, and all in pretty good condition - which is trickier than I expected.
The wood from the 3rd pallet is used as the shelves and the supports underneath the shelves.
I really enjoyed making this, and love how it turned out.
Hopefully the photos inspire others to give it a go!
Entry Way Table. Although not made from one of your plans I wanted to share it as is the biggest thing I have made so far from my own design.
I essentially used the same materials as posted on Ana's website, with the addition of modifiying the plans to fit to my needs. I used the same hinges, however got mine from home depot Canada for 3 bucks each! woot woot. The paint was a high gloss enamal with 4 coats on the top or so. The legs were bought from a local hair pin leg guy and the cabanit doors were something a lil more special. The doors were made from 3 really really really old fence boards, that were sanded down and stained with golden oak minwax then 2 layers of oil polyurathane. Since the boards were a little more fragine than i thought, i attached them together with an extremely thing pieace of birch plywood and screws on the back. I really loved this project and pleased that ana replicated it on her website. Thanks Ana!
My first wood working project. Made it a little taller and added a shelf.
My husband built this for my birthday. He adjusted the seat height so the storage bins would fit underneath. We also added the corbels under the shelf on top. I can't stop staring at it! Just love it! We had no place for coats etc by the front door of our apartment before!
First project from own design and wanted to share as pretty pleased with how it turned out. Sides are 4 by 2s with a routed 45 degree grove on each edge to give some detail. Wanted to make the drawers stand out so I added the edging detail.
After moving from Hawaii to Maryland, I was finally able to make good on my promise to make a new bed for Suzie. I made very few minor modifications to the plans as posted.
A great way to display books in the kids playroom. So easy to make.
I'm a 65 year-old woman and proud to say I built this all by myself with leftover lumber from our deck project. I'm almost finished with a second sofa and plan on building the section piece and a dining table and benches.
Keren Weaver
This sandbox is based off one on this website. We made ours 5ft x 5ft x 1ft and instead of spacing the boards out 1/2' we put them right next to each other and routered out the space for the hinges :) It looks amazing and such fun!
I used the plans from your site to build this table for a friend. I made a couple of little design changes just to make it look different. The plans were very easy to follow, and I had a lot of fun putting this together. I did have a small problem with the pine stock wanting to bow and twist, but that was taken care of with the planer and sander.
Followed the overall plan to build the console for my daughter's birthday. Made several modifications including using (3) 2 X 6 inch pine boards attached using Kreg pocket hole screws for a seamless and sturdy top; substituted barn door hardware rollers with Barton Kramer 1-1/2 in. Patio Door Wheels providing a smooth glide and budget friendly alternative; added more partitions to accommodate extra shelving; and utilized u shaped brackets lined with felt to keep barn doors in line.
Used Kreg pocket holes to assemble the unit which gave us the ability to easily transport this rather heavy and
6-foot large console. My daughter was extremely pleased and actually many of her friends wanted to know where she bought the unit. This was truly a rewarding experience and confidence builder for me and my wife.
This kids mini dining table is a pretty easy build, especially if you have a Kreg Jig. I love that it is so pretty at a great price. It fits in well with our home too, which is awesome. The final product measures 30"x48", so it is big enough if your little one decides to have some friends over for dinner. One of my goals when building was I wanted multiple kids to be able to paint, color, glue, cut, or eat at it without getting in each others way. I think it won't be a problem! The whole project only takes a few hours. It was my first project with the Kreg Jig that has been sitting in my garage since Christmas. I was scared to use it. I can't believe I waited so long! That thing is amazing!
Thanks Ana for all of the encouragement and inspiration. I truly enjoy building furniture. It is so exciting thinking about my next project. I can't wait to use your plans to build storage for our entire play room!
Day one...Two of us making cuts and starting headboard and footboard.
Day two...Working solo, had to get creative in order to add posts and 24 and 26 to top of headboard. Sanding and staining complete.
Day three...Two of us again. Built frame and added slats using decking brackets rather than screws for ease in disassembly. Attached headboard and rails with bolts.
Only issue not specified in plans was how to attach frame to footboard. But we made it work.
Thanks, Ana!!
Our rabbit lives in a 2'x6' Xpen cage set up in my tiny sewing room. As cute and fluffy as he is, I couldn't help but see his space as intruding on some valuable sewing real estate. I had to do all my fabric cutting on the kitchen table and lug everything back upstairs to the sewing room when it was time to eat. Laying out patterns had to occur on the floor. I thought it would be quite nice to have a table in the rabbit's corner ... :) I've used 2 of Ana's plans for bookshelves years ago and so I KNEW I could come up with a simple table plan and execute it. It took me about 10 minutes to formulate my plan and about 4 days to build it. :) The top is removable so we can easily move the table ... otherwise it would be a real back-breaker!
Note: The estimated cost is $100, but that's because I had supplies other than wood to buy. Screws, glue, stain, etc. I'd say it was $60 in lumber.
Thanks Anna, great design great plan. My first attempt at a chair. Was a lot of fun , just have to build 5 more, my wife loves it.
Bob
Duluth MN
Tue, 04/28/2020 - 09:21
Thank you so much for building and sharing a brag post! Looks great! Can't wait to see the other 5!
Comments
Ana White Admin
Sat, 11/18/2023 - 12:48
Love the finish!
This looks amazing, looks like you've been busy with planters too! Thanks for sharing:)