Community Brag Posts

Good project. Learned a lot of new things. Installing the drawer slide is the most challenging 

I originally started making this for a friend, but I think I may decide to keep it! I didn't purchase any wood or paint for this project - I had a lot left over from a previous project and was able to rip down other boards to 1x2s. The fabric was another left-over... I bought WAY too much to make cushions for the outdoor sofa as I decided I didn't need so many sofa pieces in the end. The only elements I purchased for this chair were the hardware and 1 can of primer... so it turned out to be under $10!

Adapted from the chalkboard produce crate plan.

Awsome work bench. After I fininished with the table, I decided to add to it. I put on a pegboard with 2x4's on the back. Then a dowel rod on the side for clamps. Santa hooked me up with a shop light so I used scrap 2x4's to add a support arm for it, That called for a power stip on the back. I now have 3 power stips mounted and two bottle openers on the front. Next up is led lights for the bottom shelf.

My wife and I had another baby girl and Avery was moving out of her crib into a big girl bed. Definitely didn't want to buy cheap so after seeing some amazing plans on Ana-White.com, I had to build it myself. I loved the storage this bed had to offer and the simple look of the large headboard and footboard. I got started, and because of my scheduling i had this built in two weekends but total of about 10-12 hours. Very glad I did it. My daughter loves it, wife was impressed and now one crib free for little baby Vida!

Just added my own twist to awesome project!

This was my 2nd woodworking project. My wife had been asking for a farmhouse bed for some time, so I figured I'd go for it. The end result was even better than I was hoping. It came together really well and the bed is just perfect. Thank you Ana for the plans!

I used the Ana White Queen Bed and King Bed plans as guides, as well as another blog called A Lesson Learned. I modified the dimensions to fit our specific bed, then I drew up the plans using Sketchup and got to work. All the wood is pine from Home Depot. The total project took a couple months because I could only work on it on weekends and didn't have full days to commit to it. In the end though, totally worth it and we love the bed!

Computer Desk

I modified the Clara table and a few of the chair plans to come up with Marlee's new set. I had scrap 2x2s, 1x6s and 1x3s from the Lydia Toddler Bed and so I modified the dimensions a bit and used 3 boards 1x6 and 2 1x3 to make up the table top. The chairs are a combination of the Four Dollar Stackable Chair and the Classic Chairs Made Simple. I kept splitting the wood on the legs for the Four Dollar chair, so I modified the plan to have the legs 2x2 like the table and bed. It was a lot of trial and error but I finally got it right... The only thing was I had already cut the seat slats to size so I used them as the seat supports and so I only had to purchase two 2x3x6, other wise every thing else was scrap.

She was so excited to see it... we already had 3 tea parties!! Thanks to you Ana for your inspiration. I so can't wait to start the doll high chair for Marlee's next surprise!!!

When I saw this project on Ana's site I had to make it. It turned out great and get's compliments from all my friends.

The only modifications I made were to the top. I used 2x6 boards and did breadboards on each end.

I documented my build with photos and did a 10 minute video tutorial showing the whole process of building Ana's table.

Fun easy project.  I built it for my wifes classroom.  We used 4 2 x 10 instead of 3 and I used a kreg Pocket Jig instead of biscuit joiner and l brackets. Very easy fun project.

I have been dreaming of getting a tufted bench that I could place at the foot of my bed for years now.  The only problem it was always ridiculously priced out of my range. Home decorations may just might be the most expensive part of home ownership, Hahaha.  Inspired by all of the fabulous plans provided by Ana White I set out to develop plans of my own using the principles I learned in her book The Handbuilt Home. This is one of my favorite DIY projects to date.  Here’s how I did it.

STEP 1. CUT THE PIECES TO SIZE.

For this, I actually did a lot of the cutting as I went along.  To be perfectly honest, I wasn’t entirely sure I had measured the bottom shelf and storage areas correctly.  To reduce the likelihood of mismeasurements, I measured liked 3 to 4 times before cutting every piece.

STEP 2. ATTACH THE LEDGES TO THE UPPER AND LOWER RAILS OR APRONS.

I used square wooden dowels for the ledges because I didn’t have to worry about ensuring that the boards were straight. Also I didn’t want to go through and make a ton of repetitive cuts on my circular saw or miter.  You can easily use scrap wood for the ledges as long as its straight and creates a flat even surface for the boards to rest on.  I didn’t cut the ledge the entire length of the rails.  It’s just important that there is enough support to hold the plywood base in place as you secure it to the rails or aprons to the legs.

Click here for more details and the complete Free plans and Cut list. 

We needed a prep area for our BBQ, so I decided to use the plans for the Simple Kitchen Island. I made it a little bit narrower (20 inches rather than 24), and added drawer pulls to hang up our BBQ tools. It's coming in very handy!

I used Ana's changing table plans to build this for my new granddaughter. I modified it to be more like a dresser that she will be able to use for many years.

We have a small extra bedroom in our basement for out-of-town guests that needed furniture. This plan was perfect. For the time being, Clarence the Dog will keep the bed warm.

This project was so fun! I am a beginner in the DIY world and so excited with how this turned out.  the plans were super easy to follow (thank you for the video too)! Lowes cut all the lumber for me so I really only needed the drill to put it all together. To put the table together it only took us an afternoon but in total it took us several days, once it was put together, to get everything sanded, primed, painted, and stained-overall VERY VERY pleased!