Community Brag Posts

This was my first shot a farmhouse table. It was pretty easy to make overall. Frame and tabletop were put together mostly with dowels and wood glue but I put a few pocket screws and corner braces in for extra support. I also added a decorative trim board to the sides, which I put on the face of 2x3s. The tabletop is four 2x10s and two 2x6s for the ends. The stain is a dark Expresso color and I coated with polyurethane. The legs were bought from Lowes at a reasonable price since I lack the tooling and know-how for a lathe. 

The benches were exactly the same except I used two 2x6s for the tops. 

I had been eying the IKEA Expedit 4-cube bookcase and figured I could build it for cheaper and have lots of leftover plywood for some other projects. I was right!

I built this shelf for my mudroom. I modified this plan to fit my space, it is 36 inches wide. I also used 3 - 1x3" pine boards for the top. Love this plan so much that I've made two more to give away as gifts!

Great console table.

Great project and fun to do. I've actually made 6 tables off this same plan, all different sizes,from 4ft. To 8ft.. 

I made a few changes to the Farmhouse Bench plans as I wanted to match the design of the table. Most notably, I lengthened the seat boards to replace the breadboard end caps. This made my total length 67″, the perfect size to fit under the table if needed. The width was changed to 15″ and the height remained 18″.

We haven't had bed frame since we moved from Florida and as we now have our own home, it was time to get one. My friend gave me headboard they had no use, so I just had to build rest of a frame.
Notice that we are middle of the hole house renovation so we have no trims, walls are lacking paint etc :) I still need to make night stands and closet for us :) Let see how they come out.

Follow our projects and life middle of the mountains in my blog :)

http://ourleaningtree.wordpress.com/diy/bed-frame/

This project took me a little longer to finish but I'm happy with the results.  I used the plans to establish the size and carcass, but changed up the style on the inside by putting a shelf on one side and drawers and glass/wine holders on the other.  For wood I used 3/4" Maple plywood and common board pine.  The color is minwax Jacobean and for protection I applied wipe on poly satin finish.  This gave it a nice hand rub look.

I loved the original one posted and it inspired me to create our own version. It's getting great reviews !

So appreciative for the plans. This was one of the bigger projects I've taken on but I had so much fun with it. A client of mine actually sent these plans to me because she wanted this exact bed with headboard. I was a little apprehensive at first because I haven't normally done a lot of custom work but it was a lot of fun. 

I saw this bed and just had to have it for my daughter. She loves it so much and it looks great in her room. It was easy to make, but very heavy. We were very meticulous to hang, we might have spent more time hanging it than building it :) There is more info on my blog.

I needed to use my small coat closet more efficiently (observe the disaster in the before picture!), so I installed built-in shelves along a side wall for all our board games. Not a plan really, but just a simple solution. Measure the height you want your shelves to be, install a 1X3 at that height on either side wall, making sure they are level and secured to studs or anchored (Mine are 1 foot apart up to 5 feet). Then install plywood or solid wood shelves across the supports. Screw in to secure and you've got functional, inexpensive shelving, built to fit your unique space.

Our version of the Brandy Storage Bed in king size.  Added a headboard made from from weathered wood leftover from building our house.  The "scrap wood" pieces used to cover the bottom are a mixture of rough cedar, old wood from a grain bin and general 1X scraps.

Thanks so much for the plans Ana, we love our new bed!! 

Fell in love with this table! Couldn't wait to build it. Found a great mill that had raw stock of a variety of woods. I chose White Ash  because if the hardness and beautiful grain. They planed it to 1-3/4" thickness. Modifed the width to 50" and turned the truss supports underneath to add extra support for the table top due to the weight of the White Ash. Finished with provincial stain and 6 coats of hand rubbed poly. Used wood bleach on the 4x4's to take the red tint out before staining. Worked great!

My sister needed an extra tall stool for the bar her husband built, so I adjusted the Parson Chair plans to make them fit. I included the Sketchup model that I used in my blog post.