Community Brag Posts

Thank you so much for your plan. I made some small changes. I used pine wood for the box sides and dividers, I moved the drawer faces to the outside and used 1/2 inch plywood for the drawer boxes to add some more space. The drawer faces have an inlaid to match my farmhouse bedroom I am currently building. The final product was stained with Minwax Golden Pecan and clear coated with warm semi-gloss.

I mostly followed the directions as provided. My only changes were using hickory instead of pine, it is a nicer wood and it only added $6 to the project. I also put non slip pads on the bottom of the bottoms and used 14 feet of fabric in place of curtains. It is a very quick and inexpensive project that my kids have been getting a lot of enjoyment out of.

I made it a little different, with a small door on the bottom as a little storage.
I loved making this for my kid, and as my first project ever I feel very proud of it.
I don't remember the exact amount of hours it took because I had little time to work on it (maybe 3 hours/week) so it took quite a bit of weeks to complete but it was really easy and fun! :D
I like how it's tall enough for my 2 year old to play standing, before we had a plastic one that was very very short, also it's sturdy enough for climb on it. xD
By the side I made a super easy, varnished, cupboard, following the same main steps from the stove, I only didn't put a front door and added on one side a towel holder and on the other side a small shelf/bar table

Made this table and chairs for my granddaughter's 3rd birthday. I used folding brackets on the legs of the table for easy storage. My granddaughter picked the colors and I can't wait for her to see it.

I saw Ana's plans for the farmhouse bed a couple years ago I think and have wanted to build one ever since! My husband and I were moving over to Oregon from Scotland though so our timing wasn't quite right... in the end though, I waited until I was 8 months pregnant to do it! We raised the footboard to be about bar height (hung our stockings from it at Christmas) and used carriage bolts and routed out the 4x4 posts to make the bed modular. We also used a forstner bit to drop the screws and plug cutters to make a nice cover up for them... If I could do it over I would have used wood conditioner first before staining to achieve a smoother stain job, but we like how it took to the wood a bit crazy-like in the end. Obviously, night stands are next. :) We LOVE this bed! Thanks Ana!

I made this doll closet to go along with the canopy bed. It came out great! I put some pictures of the build on my blog.

I used the pattern and instructions on how to re-size from http://1inchminisbykris.blogspot.com.es/2013/01/chair-upholstering-tutt…. I then built the base using 1x1 and part of a wood closet rod I had left over and drawer bottom material from Home Depot.  I know those descriptions are not super informative but it's just materials I had around the house.  Once the base was built I used Ana's instructions from the doll mattress tutorial to sew the bottom and back cushions.  Unfortunately, I don't have pictures from the build but I intend to make her a couch when I have time so hopefully I can add some pictures of that to give an idea of what the frame looks like.

A friend asked if I could make a potting bench for her. She wanted something simple, functional and attractive. My first thought led me to Anna’s site and I found these plans. My friend is so happy with the design and is over the moon with happiness. Thank you!

Made by my husband. We adjusted the plans for the step ladder and made them deeper.

This project took me a while to do just because I had to fit the time in to complete it. Plus I changed the stairs up from the plan because I didn't like how they turned out. They seemed to sag in the middle when you pushed down on it like a kid would when walking the dolls upstairs. I then tried the 2"X4" method suggested somewhere in the posts but that didn't turn out well either. So I searched online and found Wayne of the Woods website here: http://www.wayneofthewoods.com/dollhouse%20plans.html
Scroll down and find the stair plans I adapted to fit the dollhouse I built. I used scrap 1/4" plywood and 1 1/4" (I think) "L" trim/molding. I think I'm most proud of those stairs! :)

These plans where so easy for my hubby to follow and put together. My son's room is small and even though it's a big bulky bed he has all that floor space to play now!! 

Love your site and wondering if you needed an idea. I know I would love to see a plan for this bathroom shelf. See picks attached. I was in a hotel and just had to take some pics of it for you.
Think you will design any more tiny homes? Keep up the great work and love, love you’re designs.

My 6 year old son and I made this doll bed for my daughter. It's the cutest little bed. Right now she puts her "Bitty Baby" doll in it but it will be great for when she's older and has an American Girl doll, too. And, it gave me a chance to make a little quilt. That was fun.
It was a quick and easy project! Thanks, Ana!!

I altered the plans a bit so this would fit along the wall where we wanted it. I basically shortened the width of the steps. I left the storage under the hinged 1st and second steps but I put in a shelf style cubby under the top step. This worked out to more useable space for us. I used cheap wood and just plained them down. I think I spent around 300 dollars including paint. But I also used a full sheet of plywood on the back as well.

I wanted to replace the awful cart we keep our coffee maker and toaster oven on, and have always wanted to see a butcher-block top in our kitchen. We are renters, so doing anything like countertop remodeling is out of the question. I decided to build this little console and present it to my husband, the coffee-drinker of our house, for Valentines Day. The actual construction of the console was very easy, it was the sanding, plugging of pocket-holes, and staining that took a week! My husband loves it, though, and immediately rid of the old cart and set up his coffee-maker on the new one. We are both very proud of it.

My niece, who visits often needed a place of her own, for drawing, painting, playdohing, and of course the token lemonade stand. This is is, she loves it. When she's here, one weekend a month, it comes out, into the sunshine, so she can do her little girl activities. I left the top so I can resand if there are any accidents, and now it has a coat of poly sprayed on. I did make this project intermediate, due to the very tricky screwing that needs to be done not to go thru the top. I did use my Kreg Jig