Community Brag Posts

I made this chair as a part of an outdoor furniture set including a loveseat and coffee table (also featured on this site). Very simple and easy to follow instructions..I did not have a jig to create the pocket holes, so I decided to leave the screws exposed and then cover them with wooden dowels sanded down. It created a little more work but added a little more character.

I needed this to be a little taller, so I added another drawer. Other than that, all the other dimensions were the same. I built it in one weekend, but the finishing took about 5 days (for drying time between coats). I was trying to match a baby bed (expresso) so I stained it dark. I also used plywood on the sides, top and drawer fronts instead of pine boards. It really turned out great and matched the bed perfectly.

I modified it slightly by leaving off the trim around the perimeter. I also shortened the table to 84" which then only required 2 legs for a custom fit for the mom space. The finish was distressed to conceal heavy use (more like spills :-D) from kids which turned out to be a home run with moms

Check out some tips during my build @ charitybuilds

Built this 2x4 deck furniture set. Stained in espresso color.

modified that bed, it is higher. We also paid our neighbor, who is an artist, to design and paint our foot board. Our cats love this bed too! We are putting the sideboards to cover up the mattress tonight.

p.s., If you live in GA and want to do something like this, let me know and I will give you the name of our artist

We built this out of solid Maple for my son's 30th birthday. He has a full-size bed, so we had to adapt the queen size plans. It turned out great....he was thrilled...but it was heavy to carry upstairs to his apartment!

This was my first attempt at furnature. I didnt use the best quality wood, and had a hard time finding straight boards at my local Lowes.

This was made entirely of scrap molding. The sides and bottom shelves are left over baseboard. The front stops are made out of door/window casing.

We wanted this to hang on the wall instead of the floor, so we added 1x3 scrap under the 2nd and 4th shelf and countersunk screws into the studs in the wall.

We recently moved to across country and couldn't fit all our belongings in our moving van so I am on a slow but steady quest to my own "hand built home"! While my husband works with his computer genius types, I am pulling out my tools......rather basic and simple tools because none of my good ones fit in the truck either!

We had some roughcut cypress lumber left over from building our house which has been laying in my yard for a few years. Once I received Ana's new book, I knew just what to do with it! We love our new chairs so much we built a firepit to go with them!

Since the original post, I made burlap seat cushions. Love it!

I took the plan for the crown ledges and put it above the window then added pre primed 1x4s as the trim also.

First try at building something.  Start up cost in tools is not reflected in the estimated cost.  Learned a couple of valuable lessons in cut accuracy and order of work.  For us, we will buy/cut/sand/paint/assemble.  Dont let Home Depot cut your plywood.  They did a terrible job.

An easy afternoon project. Thanks Ana White! The painting was more laborious than the building, by far.

My family needed a new outdoor dining table so my husband and I made this DIY Restoration Hardware Inspired Farmhouse table with Salvage Grey Wash Finish! I combined two popular RH table styles, the rectangular X-base Table and the Brickmaker’s Table, to come up with this distinctive innovative design: an X-base bottom with an industrial bolted plank table top! This will blow your mind....this table cost us only $157.00 to make, just a small fraction of the the RH $4690.00 price tag for their tables! We started with Ana White's Farmhouse Table plans, added inset lag bolts to the planked top and then gave our table a customized salvage grey wash finish to add a touch of gorgeous grey to a dark walnut base layer. We've had many fun dinners on our large farmhouse table with family and friends! See my blog post for all of the steps and materials!

My daughter asked of I could make cubbies for three grandchildren, and the single unit on this site seemed perfect. After I made the first two we could see that there was not a good way to fit three into the designated space, so I decided to make a corner unit and bolt them together. They love it!

Another huge THANK YOU to Ana for her amazingly timely posts! My daughters attend a pre-school that hosts an auction fund raiser every year. Last year I made Ana’s kids storage bench and filled it with fun craft items. This year I saw Ana’s jewelry wall cabinet and knew it had to be done! We have some amazing local artists so I purchased a beautiful pair of glass drop earrings to hang on the front of the cabinet. I think it turned out great (if I do say so myself!) Thanks again Ana! And by the way, distressing wood is an awesome project for little helping hands!!