Community Brag Posts

Well I told my sister that I bought a saw and some tools and I was going to attempt to build my own dining room bench... being the snarky "younger" sister that she is, she suggested I start with a cutting board instead. :)
But hey... go big or go home I figured, so I tackled my first ever carpentry project: the Triple Pedestal Bench from Ana's plans!
I attempted to cut down the measurements for the top from 106" (in the plans) down to 70" (to fit my table) BUT I screwed up my measurements (I suck at math...shocker!) and ended up with an 86" long beautiful beast of a bench
somehow... so beginners mistake! At least now I have some practice under my belt for when I have the time to tackle this project again and start over and make a new one that actually fits my dining table...
And while it's far from perfect, I absolutely love it... it turned out better than I had hoped and I still have all my fingers and limbs attached! Thank you God !:)

We finally built the #1 Project on my to do list. Took about 3 Days total with finishing and all. Love it so much, defintately my fave project to date! Have to do nightstands next!

 My kitchen is huge but has little counter space since I pulled out two oversized peninsula(6'x3') island things in my kitchen that had no storage. I also found out there was an outlet behind each one. The only outlet on the wall I am showing was covered. I was relieved to find it. I decided to build the Farmhouse Kitchen Island & Bar Plans and put a few shelves over it for coffee and tea. I made one drawer and one flip down drawer face. I put a large bowl in the cabinet below the drawer to catch coffee grounds. I alos made the cabinet 4 feet instead of 6 due to the space. I also trimmed a 1x3 down to cover the bottom foot plate so stuff doens't collect under it. I also added wheels so I can move it out if we have a lot of company for extra seating. The drawer faces are recycled barn wood from my sisters property. They are clearing out what was a 100+ year old barn that had fallen over. The shelves are from the same wood (I used bronze spray paint to paint the brakets on the shelves). I sanded it down just enough to get the splinters off. I used 4x4's for the bar side and bought a pre-made butcher block from Menards for the top. I stained it with carrignton stain from rustoleum except the barn wood I just clear coated. Oh, I added 12 in drawer slides to the drawer. The mail sorter plan is from http://www.shanty-2-chic.com/2016/02/rustic-chalkboard-mail-organizer.h… I made it bigger to fit the space. The organizer took a day the shelves to a couple hours and the Island took a week off and on. The secretary is an antique passed down to me along with the chair. I am planning on making the full size Island later on, with a few adaptations.

I made this for a friend who needed some separation of 2 rooms. It works well as a see through wall/storage. I seen a photo of this and made it to the specs of that. It is 65" x 31.5" x 11 1/4". It turned out really well and very sturdy. The boxes are 12"x20". Bottom shelf is 7" from the bottom. I used all shelving wood which I would change now if I knew how much it chipped away and how heavy it is.

My husband built this table from the Farmhouse table plans.  Just changed up the top somewhat.  It's beautiful!

I've very happy with the results of my "Fancy X Farmhouse Table" project.  I modified the dimensions to fit our space; this meant making the table thinner and re-sizing the "X's" proportionally.  Also, for trimming the edges of the "X's", I came up with a combination of base board pieces at the end of the 2x4's.  I hadn't used wood stain in over 20 years because I had gotten such blotchy results.  This project reintroduced me to stain and I'm glad it did.  Turns out, the secret is proper sanding AND the use of a "pre-stain" product that sets up the wood for good(even) absorption.  Polyurethane was used as a sealant, while the base frame got white semi-gloss.  Cheers, good luck on all your projects!

-Robert
 Bellingham, WA

Built for a bike shop. 90L x 20D x36H

This was an easy project. It turned out great. I made my own hardware from using the video on Shanty 2 Chic website. That's for posting the plans. 

Modern Adirondack Chairs

I modified the dimensions slightly and opted to not mount the fold down doors as I figured they would always be open anyway.  I built this mostly from solid red oak save for the bottom panel and the middle panel, which are plywood.  I crafted the top out of 5 pieces tongue and grooved with mitred corners on the front.  I also tongue and grooved the doors with glass insets.  I finished it in Minwax red cedar under poly.

We needed a large dining room table for our space and couldn't find one we liked that didn't cost a fortune.  We adjusted the plans to make the table 9 feet long.  Also, around the edge of the table we added a 1.5 inch frame.

I built these bunk beds for my almost-10 year old twins this spring! These were modified from the Side Street Bunk Bed plans to accommodate the longer Twin XL mattresses. I took inspiration from the Maine Cottage bunk bed collection for the end panels of the beds, and added furniture feet as finials on each post. It was a fun build, but pretty time intensive as I built both sets at the same time. This was my first major build.

I adjusted the measurements to make it longer and wider. I also looked the original Pottery Barn trunk and tried to copy the multi color finish. I had so much fun building this!