Community Brag Posts

A smaller version of the original plan, intended to be a nightstand for our bedroom.

My 15 month old needed a new dresser and a place to put his changing pad as he outgrew the changing table with rails but still fits on the pad itself. I stained the drawers dark to match his existing crib. I used plywood for the drawer faces and attached 3/4 inch square poplar as pulls. I wanted an integrated look and the bonus is that my son has a harder time getting a good hold to open the drawers. I used the plans for the three drawer dresser but omitted the face frame because I wanted to cut costs (I used poplar not pine or else it would not have added much). I just made the plywood wider and I added some stabilizing pieces in the back.

I made one fairly major change. When I was buying the boards, I noticed the store sold a panel of joined wood that was just a bit bigger than the final table top was going to be for just a couple dollars more.  My kiddo likes to write and color, so I figured a smooth-topped table might make sense.  I could have cut down the panel, but as it was only a few inches bigger (36x20x1) I modified the design a little bit instead and just made the cross beams a little longer.  My only concern is that the large panel won't drain water as well as the the four boards in the original design, so after I painted the stencil (I got a die cut machine for Christmas, so suddenly everything needs a stencil...) I applied 4 coats of spar urethane to the top and two coats everywhere else. We'll see how it holds up.

Our living room is long with a vaulted ceiling. I wanted to find a way to break up the length of the room visually, and Ana's ten dollar ledges were the perfect solution. They also had a great price tag!

I changed the the plan just a tad to break up our wall space, creating two ledges - one 6' and one 4' long - instead of one that is 10' long.

The only other variation we made to the plan was adding kreg pocket hole plugs (http://www.kregtool.com/solid-wood-pockethole-plugs-prodview.html) since we hung our shelves high enough to see where screws were drilled in.

After shelves were assembled, I painted them using Lowe's Antique White in satin finish. This project was easy, fast, and very affordable! I love that we can change out the items on display either seasonally or whenever we want a fresh new look. These ledges would work in any room and even instead of a chair rail in a dining room... and the lip on the front makes them safe so that nothing will slide off!

This was a frist time project for myself. I'm always trying to prove to myself and my husband I can take these new projects on, and found this plan to be very easy to follow. I used the modified plans from "House of Wood" as the more square-ish version of the table, becuase those dimesnions were more suitable for the space I was trying to fill. 

This table is quite large, and that is what drew me to it. I loved the solid-ness of it. It almost seems indestructible (something that is handy with 3 young ones running around)

Can't wait to start another project! :)

Needed a corner hutch in our dining room and what better way to get one than build it!

Material: Re-purposed dresser from thrift store.
Finish: Rustoleum High gloss black paint finish with brushed nickel drawer pulls

This is a very manageable weekend project that does not require any power tools. For more photos of the transformation check out my blog.

Built a simple bench to put under our big living room window. Top boards are were reclaimed and left over from my buffet table project. One of them was fracturing on the outside, and upon cleaning it up it gave it kind of a live looking edge that I think looks cool. I used 2x6 pine for the legs and support underneath with 2x4's.  

My wife and I came across your plans for a single canopy bed which we modified since our granddaughter Adelyn has two American dolls.    Modifying your plans to widen the bed was easy.  We elected to go with a "split rail" design for both the headboard and the footboard.  

My wife made the bedspread, pillows and "curtains".

Today (2/17) is her birthday - can't wait to see her reaction.  Thanks for posting the project plans for this, as well as many others.

Bob & Marilyn, Rochester NY

We had been looking for a headboard for our son for the longest time, but could never find anything we liked in the shade we needed in the stores. Fell in love with this bed, thought it was one of the more "boyish" styles that I've seen which was what I wanted for my son. Asked my husband if he thought he'd be able to build it, he said he'd try and voila! We, however, modified the plans a bit and only made a headboard, but overall, I love it!

My daughter's 4th year-old birthday gift.

We made a modified (and scaled down) version of this dollhouse. Check out our blog for a complete list of details, plans, dimensions, furniture plans, and a downloadable sketch-up file to help you in building this. SUCH a fun and wonderful project. This was a Christmas gift and we are hoping it will be around for years to come! Thanks Ana.

http://www.thoughtcomics.com/projects.html

Have fun! We are beginner builders but it took us quite some time to build this. 20 Hrs...??

Email any questions!

I used old gumwood and pine for the table top. Just finished renovating 1930’s house and saved some old wood from the baseboards, fireplace mantel, etc. Used craigs jig to connect them for table top. I was only ¾ inch thick, a bit too thin for my liking, so I added bottom frame from new ¾ inch pine then enclosed the whole table top with the 1.5 inch frame from old wood leftovers. Legs all new 4X4 fir beams. Came out quite nice and definitely unbreakable! Thanks for the plans, Anna! 

This project was completed in a weekend. I was really proud of the result. 

As a Notre Dame fan, this was a tough one, so I charged extra for having to stomach the OSU red. It was a long build, and by far my most ambitious piece of furniture since the customer wanted it to be full size (as opposed to twin). They were very happy with the finished product (especially the desk top w/logo, which was a surprise).

Most of the joinery was done with a Kreg jig, I used dimensional lumber for the support & cabinet grade plywood for the shelves. Thanks for looking.

My husband and I built this bench for a wedding gift.  We love the plan, so easy to follow and alter measurements to adjust size.  We finished it with a whitewash finish.