Community Brag Posts

I built this at the Home Depot "Do it Herself" class last month.  I have been trying to figure out something for a large ironing board (for yardage of fabric for quilting) for quite some time now.  I decided this was PERFECT!  I removed the top tray, and added a 2' X 4' craft board on top, covered it with insulbright and canvas and it's a perfect Ironging station!!  I keep the ironing supplies underneath, and I have tons of extra storage space, it's WONDERFUL!

Built my wife a farmhouse table. We kind of took 3 different plans and made 1 table. We used the table top from one set of plans, the legs from another, and the X design from a 3rd. We built it on our week off for Christmas. Building wise it took 10-20 hours, but there was a lot of drying time with all the stain and poly. Two coats of Early American stain and 3 coats of poly on the table top. It's about 7' long, and the only problem now is we don't have enough chairs. 

A year ago I built my daughter a custom dollhouse for a Christmas present. She asked if I could make her one in her size. Initially, I laughed and said that I didn't think I could pull something like that off. Over the next Spring Break, I decided to give it a try. After pricing out custom playhouse kits online, I figured I could do it myself. I watched some youtube videos and looked at pictures online and came up with a project plan. The detailed step-by-step instructions along with pics are available on my blog: www.momthebuilder.net. Good luck with your playhouse project!!!

Modified the Gaby Kitchen Island plans to fit our own needs! LOVE THIS PIECE!

We wanted to make our daughter a play kitchen for her birthday. We have a farmhouse sink so we wanted her to have one just like ours. My husband built it out of wood. We wanted the cabinets to look like Shaker cabinets so we added trim to them & the Fridge. We bought the handles from Home Depot.  If you have any questions I will be happy to answer them. 

9 drawer dresser made out of African mahogany wood. 

Didn't use the wheels, so I lengthened the legs to compensate. Also I didn't make it round but instead cut the corners off and used a router on the edge. We use it mostly for puzzles.

I used the plans for the Fancy X Farmhouse table, but customized the lengths of both the bench and table to fit our room and to the sizes we wanted.  Thanks Ana!

I had a great time building this coffee table and the instructions were easy to follow, especially for a beginner like me. Thanks Ana! 

I wanted to build some cabinets to his our computer, stereo, game consoles, and seeing machines. I needed something that would allow a remote control to work through, so I used decorative metal sheeting found at the orange hardware store. They're built to be nearly flush with the fireplace. The left cabinet is made of 1x8s and measures 36"x36". There are 2 interior shelves. The shelves are slightly shorter cuts, measuring 34 1/2. The right cabinet is the same as the left, but with a 18"x36" unit kreg jigged to the front. That was to accommodate the larger media units while keeping the cabinet flush with the fireplace.

The fronts are just 2" trim frames with metal sheeting screwed to the inside. I used metal corner braces to hold the corners in place. They're mitered corners. The hinges are cheap $2 hinges and magnetic closures hold the doors closed.

I also made the mantle. It's a piece of 1x12 on top with a flat foam piece of molding and 2 corner pieces.

A little warmer than I had planned but very happy with my completed first project. Thanks Ana!

I used the Sliding Door Console and modified it for a 36" Electric Fireplace insert.  Behind the doors are the shelves as per the original design.  

I did purchase the door track - and used reclaimed wood for the doors.  These pieces are about 1/4 - 3/4" wide and vary in color.  

This coffee bar is build with three different kinds of wood. The top and bottom shelf are floor boards from a 150 yr old barn. The front and side panels are siding from a 200 yr old barn. The legs were cut from a tree on my property. I used an Alaskan chainsaw mill to get them to thickness and a table saw to square them up. Assembled with nails, where visible for the antique look and a screws where not visible. Natural finish for natural appearance. - David Girard - (G-rod Enterprises)

This is a coat rack that I recently built for a friend of mine who was struggling with a way to organize her kiddos' coats and packs. She doesn't have a coat closet off of the entry way, so we installed this wall-mount tree design on an interior hallway as you enter the home. This would also be cute in a kid's room or a mudroom. I posted step-by-step instructions with pictures on my blog at www.momthebuilder.net. Let me know what you think!

First project from dad tearing down his barn. Used ana's plans for queen bed and added to fit king dimensions. Husband also requested a tall bed so I added 6 inches to her measurements.