Community Brag Posts

My floor-to-ceiling garage storage is 6' w x 8' h. I wanted to utilize the entire height of the wall for the rack. I also created a small cubby at the end for tall items like brooms, poles, etc. I also added 2x4 pieces on the top, sides and foot of the rack so I can add doors to hide the clutter stored on the shelves.

Built 2nd bookcase. This one for youngest granddaughter.

Mudbone1959

Made my version of the Tryed table out of bowling alley maple which came with a purchase of nicer wood a while ago. The maple has random nails in it so instead of making it nice I just ripped it on the table saw leaving all the saw blade marks and holes etc. I thought I was gonna end up burning it but it turns out I have use for all this stuff! The construction is easier than the plans given. I omitted the inside supports. Just a top, 4 legs, 4 side skirts. Use pocket screws for skirts and legs, and 90 degree brackets for table top. Getting crooked distressed wood to glue up / line up nice nice is not as easy as using straight wood. The table top is tricky to glue up without squeezing out glue, so let it happen. Don't be tempted to wipe it off right away. I waited till it hardened then used a properly sharpened floor/paint scraper to scrape away excess, leaving a bit of distressing behind. You can't sand it much because you will erase the distressing. Crooked distressed wood doesn't glue and assemble as well so you must accept that it's not perfect. Believe it or not it took me 16 hours to complete this using: cheap table saw a very good quality DeWalt mitre saw Kreg Jig, drill bits and screws drill biscuit jointer to join the table's bread board ends (can use Kreg jig instead) lots of clamps glue floor/paint scraper (NOT A PUTTY KNIFE) measuring tape pencil COST $0

I have a friend who is a wedding coordinator, and she was doing a Gatsby themed wedding, which needed a marquee frame for a chalkboard picture she wanted to make. She couldn't find a nice (suitable) old frame to drill into, so she asked me to put something together for her.

Taaa daaaa!

The chalkboard comes out so she can put a 24" x 36" poster in there for an entirely different look. The whole thing is self-enclosed so that the wires aren't all sticking out the back.

I think it turned out pretty great - what about you?

There are more details about it on my blog.

I recently spotted a little gem in the garage - a little space in between the garage doors.  It was perfect for building a modular system of small French cleat box shelves.  I made them all using scrap wood.  I even had extra scrap wood to make a battery charging station in another narrow gap on the wall.  You can read all the details about my latest storage adventure on my blog:

http://www.justmeasuringup.com/blog/using-commonly-lost-garage-spaces-for-storage

I'm on high alert for more areas like this that get overlooked easily, and am just waiting for more inspiration to strike!

About 12 years ago we built the apothecary cabinet and painted it light blue/gray with a barn wood top. This year I decided to update it! It's now black with new hardware and feet added. I love the new look!

Check out the bar stool also. I thought the inset being stained added a little touch. I use this as my desk. I get compliments all the time!

Finished building this table with the plan provided by Ana White! Worked out great. I stained it in a with a transparent deck stain in natural sequoia. Happy to help if anyone has any questions!

Tips: Definitely cut as you go. If you get the angles are off in the center when all the long pieces connect is it makes each top piece larger or smaller.

We decided to just make the headboard, king size.

This potting bench is my first project, and I am so happy with the way it turned out. I was a little nervous to paint it purple, but I think it looks pretty good. I originally planned to deviate from Ana's plans, but decided not to go overboard for my first project. The plans were straight forward and easy to follow, it only took me a couple of hours to build. Looking back though, I would have gone with a different wood (I used cedar), because I used conditioners and sealers and primers etc... and the cedar grain doesn't come through over the paint, and isn't really worth the extra cost for what I did with it. Overall a great beginner project. I am looking forward to many more.

I was inspired by this workbench post to create a workbench, especially since I needed one! I painted it with exterior paint and added wheels. I also added extra wood around the bottom to make it sturdier.

Started with the providence bench plans and made a couple changes.

Recently identified this wonderful website. Thank you for the plan and really enjoying the process of building the furniture from scratch.

This was my first project building furniture. It was a fun time!

I wanted a bar stool for my kitchen counter and this plan was perfect for what I wanted. I painted it turquoise to match a bookcase I had in the connecting living room. Since I already had the paint and wax all I had to pay for was the wood.