Community Brag Posts

I loved he Hannah canopy bed for my daughter but felt like it was missing something. I decided to tuft the headboard and I used rhinestone buttons to give it that girly look with a small pop of glam. The tufting took probably 12 hours in total but totally worth it. We then followed all the instructions on how to build the bed with the exception of having any screws go in through the sides of the fabric on the headboard. We used plates to hold the headboard in place and screwed around the edges. It was time consuming but we love how it came together.

Farmhouse Table with pocket holes.

Duffsdesignsnc

To build:
2 x 4s
1 1/4" dowel rods - x3
2 1/2" wood screws screws
1 1/2" PVC pipe (for spacers) - cut at 3/8" thick - x2

Needed:
Hole saw kit
powerful 3/8" drill or 1/2" drill
Jig saw
Miter saw
sandpaper
wood filler
paint

Was a great project! Was surprisingly easy to put this together. Modified the plans slightly and used all 1x3" boards for the edges (instead of 1x2"). Made the top out of left over walnut from the truss farmhouse table we made earlier in the month. Painted off-white (fledgling). Highly recommend buying decorative hinges as it made a big difference in the look.

Ana Whites site is always my first stop for inspiration, she always has good designs and diagrams. I usually use her plans as a rough guide, and then tweak them as needed.

For this table, I made it 42" square, and adjusted the height. 

The main difference is I built this from PT pine, and cedar as this is going to be an outdoor table, and I would like it to last.  I painted the frame with 3 coats of exterior semi gloss paint, and used Helmsman spar urethane for the top. I did not stain the wood, as I love the color variations of natural cedar.

I also used galvanized carriage bolts to connect the legs. This increased the costt, but I wanted to be able to remove the legs.  For more in depth connection details see my blog.

The table turned out quite well, is very sturdy and has gotten quite a few compliments, thanks Ana for the inspiration to build cool stuf! I love building STUFF!

This was my first attempt at building and I learned a lot such as if you drop pine, it cracks in half - and - when cutting with a jigsaw, cut inside the lines....you can always trim more off, but you can't put it back - and - my dogs can distress a piece of furniture faster than I can if I put it under "thier" window....whether I want them to or not!
This was a great beginner project and gives a fast, satisfying result. As you can see, it has become the cat's bench...can't get a picture of it without him, he lives on it!
Just a couple of notes: I cut the legs more according to the plan diagram than the pretty cuts Patrick made on his...I wasn't ready for that. Also, I didn't have my glasses outside with me, so my measurements on the legs are probably not right. I made the top shorter because I wanted it for a specific space (which didn't work out, see note about about dogs and distressing....ugh!).
Also, this probably should have taken me just an hour or so, but I had my Kreg jig set all wrong and first had shallow pocket holes (see note above about pine breaking when dropped) and then made them too deep (learned to use wood filler)! That's when I finally got my butt into the house to get my glasses to read the dang directions (again!).
Thanks Patrick and Ana for giving me such a great, easy beginner project!

This project started on a Saturday and I moved it into the house the following Friday. All that being done with two little cherubs running around and making demands of me every 10 minutes. Super easy build and my first time.

This was one of my first builds ever! I'm hooked! 

We built our patio furniture with your outdoor chair and couch plans! Thank you thank you! 

Candice

Building the desk was pretty straightforward. I actually saved a little money going with the 2x6s (4 of them was under half the price of a pine project panel) rather than the panel which I actually brought home first. I went with the 2x6s instead because it felt sturdier, and the straightest panel I could find was a little warped (which I didn't want to force).

My biggest piece of advice is, if you don't have a wood planer, DO NOT use a Kreg Jig to assemble the top first. 2xWhatevers just don't seem to "lay" the way you want them to if they're all connected together. I built the legs, added supports and then used glue and 2" finish nails to secure the top, butting them up as close as I could (there's only very minimal gaps, ~1/16 or less) It is SOLID. I filled in the nail holes with Elmer's stainable wood filler. After staining, I used a tiny artist brush with the stain on the filler so it could penetrate a little longer. Worked like a charm!

We decided to go with a color stain on top because it's going in a craft room/office so we wanted it to be bright and fun to get our creative juices flowing. The walls are a light gray so we figured we could afford some color :)

This project was meant to be a birthday present for my niece; however, after showing it to other people, there are now multiple people that are interested in having their own, understanding that I will be able to make it for much cheaper than buying an equivalent project from a store. It was a fun project and took little time to complete with minimal resources required....and for cheap

Barnwood fancy x farmhouse table.  

My husband and I modified this bed quite a bit to make it work for our 4 year old grandson. We made it 60” tall and it holds a crib mattress and spring base. Considering it is for a 4 year old, we did add a brace on the back of the bed, so it could be anchored to wall studs to prevent tipping.
After the painting was completed, we had to head home, so I will share “completed” photos later. By the way, he loves his “Big Boy bed”!

I built this for a friends upcoming baby shower! She has yet to receive it so I hope she loves it. It was super easy to build, even the fancy scrolling at the bottom of the sides was relatively easy. I can say that only because I'm an experienced builder, but for someone new to this, it could be daunting. Just go slow and try it out on practice boards first!

So easy and fun!

Built my wife’s the bench she wanted. We’re very happy with how it came out.