Community Brag Posts

I present the "Castle Loft Bed" with minor modifications. Finished in a "Frozen" theme.

It was time to upgrade my youngest to a "big kid bed" and she was insistent on a frozen bed. After searching for various options we settled on the "Castle Loft Bed" from the Ana White catalog of plans.

We left the slide off, due to available space. Also we changed the steps to be more of a usable toy box/storage and hamper area. I also modified the internal bookcase to have a small "secret" cubby for her "valuables". We also added color changing LEDs to fit the little princess's mood.

I hope you like my rendition and keeps in spirit the DIYers quality.

Very quick stools: 45 Minutes

Materials:
Lumber (plywood or solid 3/4 stock)
foam & batting to size
Straight Legs Plates
pre-made legs (finish to taste)
spray adhesive
staples
fabric

Tools:
Hammer
small flat head screw driver (helps to have one on hand)
small drill bit and screw driver (or cordless drill)
good shears and a razor blade. I circular fabric cutter is awesome and leaves a clean edge)
Staple Gun

* Out of a reclaimed 1x12 cutout 2 8"x14.5" pieces of lumber.
* Space out and attach the Straight Leg Plates (pre-drill the holes)
attach legs
* spray adhesive foam to the board.
* drape your batting over the foam. (I stretch and stable the batting).
* drape and cut fabric to the right dimensions (leave a little overhang to fold under.)
* Staple the fabric (either pleat or 45 the corners)
* Hot glue or nail head on your trim. If using nail heads make a ribbon from the fabric you are using.
* Done :)

My next set will be solid with nailheads

Absolutely love this site. Built 2 of these for my living room. Now building the matching sofa table to match. Couldn't be easier and I think they turned out great. Thank you for all the great plans

I followed most of the instructions, but made adjustments on the sizing of the wood because I was using rebar.

We had a lot of scraps left over from a previous project so my husband decided to piece together a night stand for our daughter's room. We modified some end table and bar stool plans to fit what we were looking for accordingly. Because her furniture is natural color, we left the wood and just coated twice with polyurethane.

A simple bench to try my first Kreg Pocket hole Jig. I designed the bench myself, but did not create plans. I used pine wood and 3 layers of varnish for protection. My wife wanted to natural finish so I preferred varnish over paint.

Surprinsingly easy project ! And my wife is very happy that the staircase if finally tidy. Happy wife, happy life ;-)

This project is so great! At first I put one side of the hinges on backwards but it was easy to fix and now it actually folds flat. I left the stabilizer feet off because I only have about four inches beside my fridge to store the tower in but it it's still completely stable. My son was "dancing" on it yesterday and it held up perfectly! Thanks Ana, I'm so excited to use this for years!!

Nice plan to do. Used an off white paint and antiqued it with stain pen.

This was my first build and I'm really happy with how it turned out!

With our old kitchen crumbling to pieces, I decided to build a new kitchen.  I followed several of Ana's cabinet plans to build the entire kitchen(more than I could list at the bottom).  I was able to customize the cabinet sizes in order to maximize my kitchen space.  I made the doors myself, so I didn't need to worry about standard sizing.  It took me about a year from demolition to completion.  I had to buy a few new tools, all the wood, appliances, the floor, and countertop, and still spent around $5,000.  I learned so much from this project and we all love our new kitchen!  Thank you Ana for all of your wonderful plans!     

I still can't believe how great this turned out and looks just like Pottery Barn's! It was our first project but we are now tackling bookcases for our family room... I can't wait to post again!

What new Mom wouldn't want this for a baby shower gift!!! Easy build

This farmhouse table I built is 40x84 and has 9" extensions on each end for a total of 102."  I opted to go with 2x4 extensions instead of 2x2s for a durable look and feel!

I finally talked my husband into helping me whip this thing up. It didn't take very long to put it together, but it did take a long time for me to figure out a finish I would like. I used the steel wool/vinegar and black tea stain, but it ended up too dark, nearly black. So I sanded and sanded and applied a wood stain on top of it. It looks great!

I am a Block Printer and Screenprinter, as well as indulging in other projects. I needed a fairly large table that would allow me to print fabric yardage fairly easily, as well as be able to layout the fabric to cut. I decided to build this table that I had seen on a couple of different sites. There was not much instruction on either site, but it was fairly easy, and I was able to figure it out pretty easily.

I wrote a more detailed blog post on my blog with details as well as what I learned while building this table.