Community Brag Posts

This is my first ever build using Ana White's awesome plans! I stuck to the plan mostly, but used 4.5 lag screws and joist hangers like others had suggested. Oh, I also used a 2 inch board in the middle of the headboard and footboard, since my HD only carried 7.25" 2 X 8's. I had a couple of hiccups.....the headboard fell down in my garage and some boards got tweaked out of place, but I think I was able to sufficiently cover up the aftermath with wood filler and paint :D I really wanted to do this project by myself (sort of a "I am woman, hear me roar!" kind of thing, but it would've been a lot easier to have a helper.....just some advice :)

Really liked Ana's 20 second tidy up table, and wanted to try to have something like this for my son. Then saw the activity table at RH and tried to replicate it down to the exact same finish. Made small changes here and there such as adding 4 individual drawers, different wood dimensions, etc. He loves it and uses it lots for his Thomas the Train Set. Thank you again Ana.

My son and I made this table this weekend in just a couple of hours with no problems. The directions were clear and easy to follow. Thank you for sharing them with us.

I built this as a side table to eat tv dinners on. I put felt on the bottom instead of wheels.

I used reclaimed fence wood instead of plywood.  Just put together three planks to make the side/top/bottom pieces.  I adjusted the size a bit since I had limited space for it to fit into.  This was my first ever furniture project and my first use of my new kreg jig.  

Love, love, love our king bed I build based on an adaptation of Ana's design.  I did the slats a little different, and used 1"x 2"'s and cut them in order to make a slot for the slat.  i also used non-mortise bed rail fasteners (from Amazon) so the bed could be taken apart easily.  This was my first wood working project and now I am hooked!  I am also a quilter and made the quilt for it too!  I did it on a long weekend by myself.  I was probably a bit slower than most folks considering it was my first woodworking project, so I was constantly looking up how to do things on Youtube.

This was a christmas gift for my wife.

My wife and I saw a large table and chairs at a local antique store priced at $1000...

It was nice and probably worth what they were asking, but after a failed attempt to negotiate the price down to a more reasonable number, I decided to build a table.   I was in the thinking stage when it hit.  I've been wanting to tear down this random privacy fence in the back yard ever since we moved in a few years ago and so......   a table was born from an old fence..

You cant tell in the pictures but this table seats 12 comfortably. ( 4 on each side and 2 on each end).  it is 7' by 4'  

Great project with super clear instructions!  Love the look of the sawhorse legs and had just completed a live edge table top, so merged the two for this coffee table.  

This my first time to make something (almost) completely myself. I did all the cutting and assembly of the rectanges with some supervision from the husband. He then helped me assemble the rectangles on to the 2x2's and to put the daybed together in the room. This took about a 2 days and cost about $75. The worst part was the painting in my opinion. I love the final product though and can't wait to try another project!
I did modify it slightly by making the dimensions 3 inches longer and 5 inches taller to accomodate a trundle bed underneath.

I LOVED this plan for a cart.  I was looking for a cart to hold my heavy mixer and be able to roll in and out of my pantry. In addition to Ana's plans,  I enlisted my 3 sons to hammer the wood to make it look rustic.  Instead of aluminum angles, I used steel angles and I used a 36 inch height to accommodate more shelves. This is one SOLID cart.  I absolutely love it!  Thank you for the inspiration!

DIY Craft Desk.

I built this desk for my wife to give her more space to create her crafts. I meshed a couple designs that I had researched to give her a unique design. This project took me 1 week to complete by only working on it in the evenings but it could be done faster if you have more time available than I did!  

Materials Needed:
2 - 6 foot 1x4" pine or Poplar wood
1- 8 foot 1x4 pine or Poplar wood
4- 2x2" pine wood 29" long
2- 1x2" pine wood 24" long
1- 12"x48" pine board (pre cut craft wood in Lowe's)
1- 24"x 72" pine board (pre cut craft wood in Lowe's)
Box of 1 1/2" wood screws
Wood glue

Wood stain and/or paint 
8- 1" corner braces

1). Cut the 12"x48" craft board in half (2- 12"x24"boards.)This will be your shelves. Sand all of the wood prior to staining.
2.) Stain shelves and desk top. We used two coats of gray stain. Finish with one coat of Polyacrylic. Sand. Then one more coat of polyacrylic.
3.) Cut the 1"x2" trim to 2- 24" long strips.
4.) Attach the 2x2" posts to the 1x2" trim with wood glue and wood screws. You will end up with an upside down U shape. This trim piece will give added support for desk top. Do this twice and then Paint your posts.
5.) Mark where you want your shelves on the posts and screw in your corner braces to hold the shelves up. I placed the shelf inside the posts to give me 12" of width for baskets. Screw your braces onto your shelf and then attach to the posts. I recommend doing the bottom shelf first so it stabilizes the posts.
6.) Do the same thing with the top shelf. Mark where you want them and attach with corner braces.
7.) Moving on to the cross box base.... Build the 4 sides of the box first with the 1"x4" boards. This desk is 24" deep and 29" tall. Use wood glue and wood screws to assemble. I predrilled the holes then, placed glue on then screwed together.
8.) Make sure your top 1x4" is the full depth of the desk so the weight of the desk top is spread evenly on box.
9.) I used this guide for the interior cross pieces. http://sawdustgirl.com/x-leg-office-desk/#aa
10.) Paint your cross base.
11.) Attach desk top to bases with wood glue and wood screws and you are all set!

It was a fun project! - Jen

My husband and I made this bed, using the twin farmhouse bed plans, for our daughter's third birthday. It was fairly easy to do and we got the building part done in one day. It was a big success!!

I built this project 8x10 and made the back wall exactly like the front wall and just added diy windows for air circulation. I live in the desert so I did not use clear panels I used white panels for sides and top and tinted panels for front and back so that my plants would not get scorched. I am running a hydroponic system and could not be happier with the results for a first time gardener! I built it completely by myself in about a month, I do have a full time job and kids that need to be taken to practice and lessons after school.

I tried to follow the plans as well as I could. I had the sheet of plywood and paint already. So I just had to buy the screws and coset rods. It was  around $40 or less!